IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf

上传人:eventdump275 文档编号:1237450 上传时间:2019-08-24 格式:PDF 页数:90 大小:2MB
下载 相关 举报
IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf_第1页
第1页 / 共90页
IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf_第2页
第2页 / 共90页
IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf_第3页
第3页 / 共90页
IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf_第4页
第4页 / 共90页
IEC 62379-5-1-2014 Common control interface for networked digital audio and video products - Part 5-1 Transmission over networks - General《网络化数字音频和视频产品的通用控制接口 第5-1部分 传输网络 总则》.pdf_第5页
第5页 / 共90页
点击查看更多>>
资源描述

1、 IEC 62379-5-1 Edition 1.0 2014-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Common control interface for networked digital audio and video products Part 5-1: Transmission over networks General Interface de commande commune pour produits audio et vido numriques connects en rseau Partie 5-1: Transm

2、ission sur des rseaux Gnralits IEC 62379-5-1:2014-07(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical

3、, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address

4、below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopi

5、e et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de v

6、otre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International S

7、tandards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webs

8、tore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub

9、The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Ju

10、st Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent te

11、rms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 20

12、02. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIE

13、C La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est con

14、stamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniqu

15、es, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle do

16、nne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email

17、. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique Internat

18、ional (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77,

19、86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62379-5-1 Edition 1.0 2014-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Common control interface for networked d

20、igital audio and video products Part 5-1: Transmission over networks General Interface de commande commune pour produits audio et vido numriques connects en rseau Partie 5-1: Transmission sur des rseaux Gnralits INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X I

21、CS 33.160; 35.100 PRICE CODE CODE PRIX ISBN 978-2-8322-1693-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez

22、vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62379-5-1:2014 IEC 2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions 7 3.2 Abbreviations 7 4 Network service specificat

23、ions . 8 4.1 Service for live media . 8 4.2 Service for management messages 8 5 MIB definitions applicable to all networks 8 5.1 General . 8 5.2 Type definitions 8 5.3 Conceptual row type definitions 9 5.4 MIB object definitions 10 5.4.1 Network ports 10 5.4.2 List of media sources . 12 5.4.3 List o

24、f live media destinations 14 6 Calls 19 6.1 List of destinations in end equipment 19 6.2 Connecting a flow . 20 6.3 Terminating a flow 20 6.4 Maintaining calls . 21 7 Status broadcasts 21 7.1 General . 21 7.2 Coding and encapsulation of reports . 22 7.3 Standard report groups . 23 7.3.1 General . 23

25、 7.3.2 List of sources . 23 7.3.3 List of destinations 23 Annex A (informative) Machine-readable block definitions 24 Annex B (informative) Machine-readable data formats . 36 Annex C (informative) Support for future networks . 39 C.1 General . 39 C.2 Services provided by the network 39 C.3 Network p

26、orts, flows, and media streams 40 C.3.1 Calls and flows 40 C.3.2 Connectivity model 40 C.3.3 Privilege 40 C.3.4 Call identity . 40 C.4 Control of routing 41 C.5 Scheduled calls 41 Bibliography 42 Table 1 Managed objects for network ports 10 IEC 62379-5-1:2014 IEC 2014 3 Table 2 Managed objects conve

27、ying the list of sources 12 Table 3 Managed objects conveying the list of destinations . 15 4 IEC 62379-5-1:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO PRODUCTS Part 5-1: Transmission over networks General FOREWORD 1) The I

28、nternational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and e

29、lectronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical commi

30、ttees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization fo

31、r Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee

32、 has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is acc

33、urate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regio

34、nal publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in

35、some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agent

36、s including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, o

37、r reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of

38、 the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62379-5-1 has been prepared by technical area 4: Digital system interfaces and protocol of IEC technical committee 10

39、0: Audio, video and muiltimedia systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 100/2107/CDV 100/2304/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. IEC

40、 62379-5-1:2014 IEC 2014 5 A list of all parts in the IEC 62379 series, published under the general title Common control interface for networked digital audio and video products, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The

41、 committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised

42、 edition, or amended. 6 IEC 62379-5-1:2014 IEC 2014 INTRODUCTION Structure of the family of standards IEC 62379 specifies the common control Interface, a protocol for managing networked audiovisual equipment. The following parts exist or are planned: 1 General 2 Audio 3 Video 4 Data 5 Transmission o

43、ver networks 6 Packet transfer service 7 Measurement IEC 62379-1:2007, specifies aspects which are common to all equipment, and it includes an introduction to the common control interface. IEC 62379-2:2008, IEC 62379-3 (under consideration) and IEC 62379-4 (under consideration) specify control of in

44、ternal functions specific to equipment carrying particular types of live media. IEC 62379-4 refers to time-critical data such as commands to automation equipment, but not to packet data such as the control messages themselves. IEC 62379-5 specifies control of transmission of these media over each in

45、dividual network technology. It includes network specific management interfaces along with network specific control elements that integrate into the control framework. IEC 62379-5-1, (this standard) specifies management of aspects which are common to all network technologies. IEC 62379-5-2 specifies

46、 protocols which can be used between networking equipment to enable the setting up of calls which are routed across different networking technologies. IEC 62379-5-3, onwards, specify management of aspects which are particular to individual networking technologies. IEC 62379-6, specifies carriage of

47、control and status messages and non-audiovisual data over transports that do not support audio and video, such as RS232 serial links, with (as for IEC 62379-5) a separate subpart for each technology. IEC 62379-7 specifies aspects that are specific to the measurement of the service experienced by aud

48、io and video streams and in particular to the requirements of EBU ECN- IPM Measurements Group. IEC 62379-5-1:2014 IEC 2014 7 COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO PRODUCTS Part 5-1: Transmission over networks General 1 Scope This part of IEC 62379 specifies aspects of the co

49、mmon control interface that are common to all network technologies, including setting up and tearing down of sessions and the service provided by the network. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edit

展开阅读全文
相关资源
猜你喜欢
  • BS EN 2243-2-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peel metal-metal《航空航天系列 非金属材料 结构胶粘剂 试验方法 金属间剥离试验》.pdf BS EN 2243-2-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peel metal-metal《航空航天系列 非金属材料 结构胶粘剂 试验方法 金属间剥离试验》.pdf
  • BS EN 2243-3-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peeling test metal-honeycomb core《航空航天系列 非金属材料 结构胶粘剂 试验方法 金属蜂窝芯的剥离试验》.pdf BS EN 2243-3-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peeling test metal-honeycomb core《航空航天系列 非金属材料 结构胶粘剂 试验方法 金属蜂窝芯的剥离试验》.pdf
  • BS EN 2243-4-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Metal-honeycomb core flatwise tensile test《航天航空系列 非金属材料 结构胶粘剂 试验方法 金属蜂窝状芯材的平面拉伸试验.pdf BS EN 2243-4-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Metal-honeycomb core flatwise tensile test《航天航空系列 非金属材料 结构胶粘剂 试验方法 金属蜂窝状芯材的平面拉伸试验.pdf
  • BS EN 2243-5-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Ageing tests《航空航天系列 非金属材料 结构胶粘剂 试验方法 老化试验》.pdf BS EN 2243-5-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Ageing tests《航空航天系列 非金属材料 结构胶粘剂 试验方法 老化试验》.pdf
  • BS EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain《航空航天系列 非金属材料 结构胶粘剂 试验方法 剪切应力和剪切应变量.pdf BS EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain《航空航天系列 非金属材料 结构胶粘剂 试验方法 剪切应力和剪切应变量.pdf
  • BS EN 2245-2012 Aerospace series Pipelines for liquids and gases Definitions《航空航天系列 液体和气体管道 定义》.pdf BS EN 2245-2012 Aerospace series Pipelines for liquids and gases Definitions《航空航天系列 液体和气体管道 定义》.pdf
  • BS EN 225-1-2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner pumps《雾化油燃烧器 油燃烧器泵和油燃烧器发动机 连接尺寸 油燃烧器泵》.pdf BS EN 225-1-2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner pumps《雾化油燃烧器 油燃烧器泵和油燃烧器发动机 连接尺寸 油燃烧器泵》.pdf
  • BS EN 225-2-2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner motors《雾化油燃烧器 油燃烧器泵和油燃烧器发动机 连接尺寸 油燃烧器发动机》.pdf BS EN 225-2-2007 Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Oil burner motors《雾化油燃烧器 油燃烧器泵和油燃烧器发动机 连接尺寸 油燃烧器发动机》.pdf
  • BS EN 2252-2012 Aerospace series Steel FE-PL1505 (15CrMoV6) 1080 MPa Rm 1250 MPa Forgings De 100 mm《航空航天系列 钢铁FE-PL1505 (15CrMoV6) 1080 MPa Rm 1250 MPa 锻件 De 100 mm》.pdf BS EN 2252-2012 Aerospace series Steel FE-PL1505 (15CrMoV6) 1080 MPa Rm 1250 MPa Forgings De 100 mm《航空航天系列 钢铁FE-PL1505 (15CrMoV6) 1080 MPa Rm 1250 MPa 锻件 De 100 mm》.pdf
  • 相关搜索
    资源标签

    当前位置:首页 > 标准规范 > 国际标准 > IEC

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1