C0091200_317 Method of Test for Viscosity of Creosote Oil《杂酚油之粘度检验法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AS 4372C-2008 Performance Requirements for Wire Electric Insulated Copper or Copper Alloy《绝缘铜或铜合金电线用性能要求》.pdf

SAE AS 4373E-2012 Test Methods for Insulated Electric Wire《绝缘电线用试验方法》.pdf

SAE AS 4375C-2003 FITTING END FLARELESS DESIGN STANDARD《无扩口接头端的设计标准》.pdf

SAE AS 4377C-2003 FITTING END BULKHEAD FLARELESS DESIGN STANDARD《无闪光舱壁配件端的设计标准》.pdf

SAE AS 437A-1996 Maximum-Allowable- Airspeed Instruments (Turbine Powered Subsonic Aircraft)《最大允许空速仪器(涡轮动力亚音速飞机)》.pdf

SAE AS 4383C-2012 FITTING ASSEMBLY REDUCER RING LOCKED PORT CONNECTION TO BEAM SEAL 5000 PSI 8 《减径管环锁定端口连接梁密封5000 PSI 8 的装配总成》.pdf

SAE AS 4388-1991 Hose Assembly PTFE Heavy Duty -65 To 400 (-55 To 204 8000 psi (56 000 kPa) Hydraulic and Pneumatic《液压和气动-65F到400F(-55C到204C)、8000psi(56000kPa)重型聚四氟乙烯(PTFE)软管组件》.pdf

SAE AS 4389-1992 Nut - Self-Locking Clinch Serrated Shank Hole Preparation Installation and Removal Procedures《FSC 5310齿状杆自锁扭紧螺母的孔制备 安装和卸除程序》.pdf

SAE AS 4393C-2015 Nut Self-Locking UNS S66286 1200 160 000 psi UNJ Thread.pdf