1、 IEC 60947-4-3 Edition 2.0 2014-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters AC semiconductor controllers and contactors for non-motor loads Appareillage basse tension Partie 4-3: Contacteurs et dmarreurs de moteurs Gra
2、dateurs et contacteurs semiconducteurs pour charges, autres que des moteurs, courant alternatif IEC 60947-4-3:2014-05(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
3、or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining a
4、dditional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et
5、 par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez l
6、es coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leadin
7、g global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigend
8、a or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android
9、Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec
10、ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 00
11、0 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the
12、 Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, pleas
13、e contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des p
14、ublications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements biblio
15、graphiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant di
16、ffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications
17、 parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues addi
18、tionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certa
19、ines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60947-4-3 Edition 2.0 2014-05 INTERNATIONAL STAND
20、ARD NORME INTERNATIONALE Low-voltage switchgear and controlgear Part 4-3: Contactors and motor-starters AC semiconductor controllers and contactors for non-motor loads Appareillage basse tension Partie 4-3: Contacteurs et dmarreurs de moteurs Gradateurs et contacteurs semiconducteurs pour charges, a
21、utres que des moteurs, courant alternatif INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XC ICS 29.130.20, 31.180 PRICE CODE CODE PRIX ISBN 978-2-8322-1567-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Elec
22、trotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60947-4-3:2014 IEC 2014 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2 Normativ
23、e references 10 3 Terms, definitions, symbols and abbreviations . 10 3.1 Terms and definitions concerning a.c. semiconductor (non-motor-load) control devices . 11 3.1.1 AC semiconductor controllers and contactors (solid-state contactors) (see Figure 1) . 11 3.1.2 Hybrid controllers and contactors (s
24、ee Figure 1) . 14 3.2 Vacant . 18 3.3 Symbols and abbreviations 18 4 Classification . 18 5 Characteristics of a.c. semiconductor controllers and contactors . 19 5.1 Summary of characteristics 19 5.2 Type of equipment . 19 5.3 Rated and limiting values for main circuits . 22 5.3.1 Rated voltages . 22
25、 5.3.2 Currents . 22 5.3.3 Rated frequency . 22 5.3.4 Rated duty 22 5.3.5 Normal load and overload characteristics . 23 5.3.6 Rated conditional short-circuit current . 24 5.4 Utilization category 24 5.4.1 Assignment of ratings based on the results of tests 25 5.5 Control circuits . 26 5.6 Auxiliary
26、circuits . 26 5.7 Vacant . 26 5.8 Coordination with short-circuit protective devices (SCPD) 26 6 Product information . 26 6.1 Nature of information . 26 6.2 Marking 28 6.3 Instructions for installation, operation and maintenance . 28 7 Normal service, mounting and transport conditions 28 7.1 Normal
27、service conditions 28 7.1.1 Ambient air temperature . 28 7.1.2 Altitude . 28 7.1.3 Atmospheric conditions . 28 7.1.4 Shock and vibrations 29 7.2 Conditions during transport and storage . 29 7.3 Mounting 29 7.4 Electrical system disturbances and influences . 29 8 Constructional and performance requir
28、ements . 29 8.1 Constructional requirements 29 8.1.1 General 29 IEC 60947-4-3:2014 IEC 2014 3 8.1.2 Materials 29 8.1.3 Current-carrying parts and their connections 29 8.1.4 Clearances and creepage distances . 29 8.1.5 Actuator 30 8.1.6 Indication of the contact position 30 8.1.7 Additional requireme
29、nts for equipment suitable for isolation 30 8.1.8 Terminals . 30 8.1.9 Additional requirements for equipment provided with a neutral pole 30 8.1.10 Provisions for protective earthing 30 8.1.11 Enclosures for equipment . 30 8.1.12 Degrees of protection of enclosed equipment . 30 8.1.13 Conduit pull-o
30、ut, torque and bending with metallic conduits 30 8.2 Performance requirements . 30 8.2.1 Operating conditions . 30 8.2.2 Temperature rise 32 8.2.3 Dielectric properties 34 8.2.4 Normal load and overload performance requirements . 35 8.2.5 Coordination with short-circuit protective devices . 42 8.3 E
31、MC requirements . 42 8.3.1 General 42 8.3.2 Emission . 43 8.3.3 Immunity . 43 9 Tests . 45 9.1 Kinds of tests . 45 9.1.1 General 45 9.1.2 Type tests . 45 9.1.3 Routine tests 45 9.1.4 Sampling tests 45 9.1.5 Special tests . 46 9.2 Compliance with constructional requirements . 46 9.3 Compliance with p
32、erformance requirements . 46 9.3.1 Test sequences 46 9.3.2 General test conditions . 47 9.3.3 Performance under no load, normal load and overload conditions . 47 9.3.4 Performance under short-circuit conditions . 54 9.3.5 Disponible 58 9.4 General 58 9.4.1 EMC emission tests 58 9.4.2 EMC immunity te
33、sts 59 9.5 Routine and sampling tests 61 9.5.1 General 61 9.5.2 Operation and operating limits 61 9.5.3 Dielectric tests 61 Annex A (normative) Marking and identification of terminals 62 A.1 General 62 A.2 Marking and identification of terminals of controller and contactors 62 A.2.1 Marking and iden
34、tification of terminals of main circuits . 62 4 IEC 60947-4-3:2014 IEC 2014 A.2.2 Marking and identification of terminals of control circuits 62 A.2.3 Marking and identification of auxiliary circuits . 62 Annex B (informative) Typical service conditions for controllers and contactors . 65 B.1 Contro
35、l of resistive heating elements . 65 B.2 Switching of electric discharge lamp controls . 65 B.3 Switching of incandescent lamps . 66 B.4 Switching of transformers. 66 B.5 Switching of capacitor banks 66 Annex C Vacant 67 Annex D Vacant 68 Annex E Vacant 69 Annex F (informative) Operating capability.
36、 70 Annex G Vacant 73 Annex H Vacant 74 Annex I (normative) Modified test circuit for short-circuit testing of semiconductor contactors and controllers . 75 Annex J (informative) Flowchart for constructing bypassed semiconductor controllers tests . 77 Bibliography 78 Figure 1 Graphical possibilities
37、 of controllers . 13 Figure 2 Methods of connecting . 21 Figure F.1 Thermal stability test profile 70 Figure F.2 Overload capability test profile 71 Figure F.3 Blocking and commutating capability test profile . 72 Figure I.1 Modified circuit for short-circuit testing of semiconductor devices . 75 Fi
38、gure I.2 Time line for the short-circuit test of 9.3.4.1.6 76 Table 1 Functional possibilities of controllers and contactors . 14 Table 2 Utilization categories . 25 Table 3 Relative levels of severity 25 Table 4 Temperature rise limits for insulated coils in air and in oil 34 Table 5 Intermittent d
39、uty test cycle data . 34 Table 6 Minimum overload current withstand time (T x ) in relation to overload current ratio (X) 36 Table 7 Minimum requirements for thermal stability test conditions 37 Table 8 Minimum requirements for overload capability test conditions . 38 Table 9 Minimum requirements an
40、d conditions for performance testing, including blocking and commutating capability . 39 Table 10 Making and breaking capacity test Making and breaking conditions according to utilization categories for the mechanical switching device of hybrid semiconductor controller and contactor H4, H5 . 40 Tabl
41、e 11 Conventional operational performance Making and breaking conditions according to utilization categories for the mechanical switching device of hybrid controllers and contactors H4B, H5B 41 Table 12 Specific performance criteria when EM disturbances are present 44 IEC 60947-4-3:2014 IEC 2014 5 T
42、able 13 Thermal stability test specifications . 51 Table 14 Initial case temperature requirements 52 Table 15 Terminal disturbance voltage limits for conducted radiofrequency emission . 59 Table 16 Radiated emissions test limits . 59 Table A.1 Main circuit terminal markings 62 6 IEC 60947-4-3:2014 I
43、EC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 4-3: Contactors and motor-starters AC semiconductor controllers and contactors for non-motor loads FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardi
44、zation comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Interna
45、tional Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate i
46、n this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between th
47、e two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications hav
48、e the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misi
49、nterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself
