JIS B 8824-3-2009 8125 Cranes -- Graphical symbols -- Part 3 Tower cranes《起重机 图形符号 第3部分 塔式起重机》.pdf

相关资源

DL T 5282-2012 水电水利工程施工机械安全操作规程 塔式起重机.pdf

JB T 11865-2014 塔式起重机车轮技术条件.pdf

JB T 10221-2010 YZRSW系列塔式起重机用涡流制动绕线转子双速三相异步电动机技术条件.pdf

JB T 11156-2011 塔式起重机 起升机构.pdf

JB T 11157-2011 塔式起重机 钢结构制造与检验.pdf

SLJJ 1-8-1981;DLJS 2-8-1981 施工机械安全技术操作规程 第八册 塔式起重机.pdf

JB T 8956-1999 YZTD系列塔式起重机用多速三相异步电动机 技术条件.pdf

JG T 72-1999 塔式起重机用限矩型液力偶合器.pdf

JGJ 196-2010 建筑施工塔式起重机安装、使用、拆卸安全技术规程.pdf

JB T 10221-2000 YZRSW系列塔式起重机用涡流制动绕线转子双速三相异步电动机技术条件.pdf

猜你喜欢

BS ISO 13939-2013 Foil bearings Guidelines for testing of the performance of foil journal bearings Testing of load capacity friction coefficient and lifetime《箔轴承 箔径向轴承性能测试指南 负载能力、摩.pdf

BS ISO 13942-2003 Bonded abrasive products - Limit deviations and run-out tolerances《粘合磨料产品 极限偏差和跳动公差》.pdf

BS ISO 13947-2011 Metallic powders Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen《金属粉末 用铸造粉末样品测定金属粉末中非金属夹杂物的试验方法》.pdf

BS ISO 13948-1-2015 Diesel engines Fuel injection pumps and fuel injector low-pressure connections Threaded connections《柴油发动机 喷油泵和喷油器低压连接件 螺纹连接件》.pdf

BS ISO 13948-2-2016 Diesel engines Fuel injection pumps and fuel injector low-pressure connections Non-threaded (push-on) connections《柴油机 燃料喷射泵和燃料喷射器低压连接 无螺纹(推进式)连接件》.pdf

BS ISO 13950-2007 Plastics pipes and fittings - Automatic recognition systems for electrofusion joints《塑料管和管件 电熔合接头用自动识别系统》.pdf

BS ISO 13951-2015 Plastics piping systems Test method for the resistance of plastic pipe pipe or pipe fitting assemblies to tensile loading《塑料管系统 塑料管 管或管 配件总成抗拉伸载荷的试验方法》.pdf

BS ISO 13953-2001 Polyethelene (PE) pipes and fittings - Determination of the tensile strength and failure mode of test pieces from a butt-fused joint《聚乙烯管道和配件 根据对焊接头对试样的抗拉强度和断裂模式的.pdf

BS ISO 13956-2010 Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test《塑料管道和配件 聚乙烯(P.pdf