QB T 1545-2015 Test method for relative viscosity relative liquidity and thixotropy of ceramic slurry《陶瓷泥浆相对粘度、相对流动性及触变性测定方法》.pdf

相关资源

ASTM D6910-2004 Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries《粘土建筑泥浆的马氏漏斗粘度的标准试验方法》.pdf

QB T 1545-1992 陶瓷泥浆相对粘度、相对流动性及触变性测定方法.pdf

QB T 1545-1992 陶瓷泥浆相对粘度、相对流动性及触变性的测定方法.pdf

ASTM D4016-2014 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer &40 Laboratory Method&41 《使用旋转粘度计测定化学薄泥浆粘度和凝胶时间的标准试验方法(实验室法)》.pdf

ASTM D1200-2010 Standard Test Method for Viscosity by Ford Viscosity Cup《福特粘度杯法测定粘度的标准试验方法》.pdf

ASTM D2161-2005 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity《运动粘度换算成塞波特通用粘度或塞波特重油粘度的标准实施规程》.pdf

ASTM D1200-1994(2005) Standard Test Method for Viscosity by Ford Viscosity Cup《福特粘度杯测定粘度的标准试验方法》.pdf

ASTM D1200-2010(2014) Standard Test Method for Viscosity by Ford Viscosity Cup《采用福特粘度杯的粘度标准试验方法》.pdf

ASTM G75-2007(2013) Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)《测定材料泥浆研磨性(Miller数量)和泥浆研磨响应(SA.pdf

猜你喜欢

FORD WSF-M4D897-A-2010 POLYAMIDE 46 (PA46) HEAT STABILIZED 50% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定的50%玻璃纤维增强的聚酰胺46(PA46)成型料 与标准FORD.pdf

FORD WSF-M4D907-A-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚亚苯基乙醚+聚酰胺混.pdf

FORD WSF-M4G351-A-2008 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A 《紫外线和湿态固化硅橡胶密封剂(于FORD WSS-M99P1111-A一起使用)》.pdf

FORD WSF-M4G351-A2-2014 SEALANT SILICONE RUBBER ULTRAVIOLET AND MOISTURE CURED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4G353-A1-1995 SEALANT SILICONE RUBBER ONE COMPONENT MEHOXY CURED BLACK《甲氧基固化型黑色单组分硅橡胶密封剂》.pdf

FORD WSF-M4G356-A-1994 SEALANT SILICONE RUBBER TWO COMPONENT LOW VISCOSITY FORM IN PLACE《现场成型低粘度两组分硅橡胶密封剂》.pdf

FORD WSF-M4L5-A3-2012 MAGNET PERMANENT THERMOPLASTIC BONDED ORIENTED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4L7-A2-2012 MAGNET PERMANENT THERMOPLASTIC BONDED NON-ORIENTED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSF-M4L8-A1-2012 MAGNET PERMANENT THERMOPLASTIC BONDED ISOTROPIC TO BE USED WITH FORD WSS-M99P1111-A .pdf