E42-11-1969 《国际电子词汇表第11组 静电转换器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F312-2008 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters《膜滤器上航空流体中颗粒微观大小的测定及计数的标准试验方法》.pdf

ASTM F312-2008(2016) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters《膜过滤器上航空航天流体颗粒尺寸和计数的标准试验方法》.pdf

ASTM F316-2003 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test《用起泡点和气孔平均流量法测定膜过滤器孔隙尺寸特点的标准试验方法》.pdf

ASTM F316-2003(2011) Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test《通过起泡点和平均流动孔试验描述膜过滤器的孔大小特征的标准试验方法》.pdf

ASTM F319-1991a(2003) Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements《航空航天用透明加热元件中裂纹的偏振光检测标准实施规范》.pdf

ASTM F319-2009 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements《航空航天用透明加热元件中裂纹的偏振光检测标准实施规范》.pdf

ASTM F319-2009(2014) Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements《航空航天用透明加热元件中裂纹的偏振光检测标准实践规程》.pdf

ASTM F320-2005 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures《航空航天用透明外壳抗冰雹撞击性的标准试验方法》.pdf

ASTM F320-2010 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures《航空航天用透明外壳的抗冰雹撞击性能的标准试验方法》.pdf