MNOSZ 1380-1952 《钉马掌锤》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DS 94-1933 Tangential keys and keyways for unidirectional torque Shaft diameter and corresponding keyway section《单向扭矩用切向键和键槽 轴径及相应的键槽部分》.pdf

DS 95-1933 Tangential keys and keyways for bidirectional torque Shaft diameter and corresponding keyway section《双向扭矩用切向键和键槽 轴径及相应的键槽部分》.pdf

DS 99-1933 Woodruff keys Shaft diameters dimensions of corresponding Woodruff keys and keyway depth in shaft and hub《半圆键 对应轴颈的尺寸 半圆键以及轴和插孔中的键槽深度》.pdf

DS EN 10034-1993 Structural steel I and H sections Tolerances on shape and dimensions《结构钢I和II型钢 形状和尺寸的公差》.pdf

DS EN 10056-2-1993 Structural steel equal and unequal leg angles Part 2 Tolerances on shape and dimensions《等边角和不等边角结构钢 第2部分：形状和尺寸公差》.pdf

DS EN 10205-1993 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium chromium oxide coated steel《生产马口铁或敷有电解铬 氧化铬层的钢板用冷轧卷形黑钢板》.pdf

DS EN 1049-2-1994 Textiles-Woven fabrics-Construction-Methods of analysis-Part 2 Determination of number of threads per unit length《纺织品 机织物结构 分析方法 第2部分：单位长度纱线数的测定》.pdf

DS EN 1185-1995 Starches and derived products- Determination of sulfur dioxide content - Acidimetric method《淀粉和淀粉制品二氧化硫含量的测定 酸量滴定法》.pdf

DS EN 2-1993 Classification of fires《火的分类》.pdf