1、 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors Sponsored by the Transformers Committee IEEE 3 Park Avenue New York, NY 10016-5997 USA IEEE Power and Energy Society IEEE Std C57.152-2013 (Revision of IEEE Std 62TM-1995) IEEE Std C57.152-2013 (Rev
2、ision of IEEE Std 62TM-1995) IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors Sponsor Transformers Committee of the IEEE Power and Energy Society Approved 6 March 2013 IEEE-SA Standards Board Grateful acknowledgment is made to Doble Engineering Com
3、pany for permission to use source material. Abstract: Diagnostic tests and measurements that are performed in the field on fluid-filled power transformers and regulators are described. Whenever possible, shunt reactors are treated in a similar manner to transformers. Tests are presented systematical
4、ly in categories depending on the subsystem of the unit being examined. A diagnostic chart is included as an aid to identify the various subsystems. Additional information is provided regarding specialized test and measuring techniques. Interpretive discussions are also included in several areas to
5、provide additional insight on the particular test or to provide guidance on acceptance criteria. These discussions are based on the authors judgment of accepted practice. It should be noted that the results of several types of tests should be interpreted together to diagnose a problem. Manufacturers
6、 acceptance criteria should also be consulted as it may take precedence over the criteria in this guide. Keywords: bushing, core, diagnostic evaluation, field testing, fluid-filled transformer, IEEE C57.152, insulating liquid, off-line testing, reactor, regulator, safety, tank, tap changer, winding
7、The Institute of Electrical and Electronics Engineers, Inc. 3 Park Avenue, New York, NY 10016-5997, USA Copyright 2013 by The Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 21 June 2013. Printed in the United States of America. IEEE is a registered trademark i
8、n the U.S. Patent +1 978 750 8400. Permission to photocopy portions of any individual standard for educational classroom use can also be obtained through the Copyright Clearance Center. Copyright 2013 IEEE. All rights reserved. ivNotice to users Laws and regulations Users of IEEE Standards documents
9、 should consult all applicable laws and regulations. Compliance with the provisions of any IEEE Standards document does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing or referring to the applicable regulatory requirements. I
10、EEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses.
11、 These include both use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rig
12、hts in copyright to this document. Updating of IEEE documents Users of IEEE Standards documents should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An officia
13、l IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigend
14、a, or errata, visit the IEEE-SA Website at http:/standards.ieee.org/index.html or contact the IEEE at the address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit IEEE-SA Website at http:/standards.ieee.org/index.html. Erra
15、ta Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.org/findstds/errata/index.html. Users are encouraged to check this URL for errata periodically. Patents Attention is called to the possibility that implementation of this standard may requi
16、re use of subject matter covered by patent rights. By publication of this standard, no position is taken by the IEEE with respect to the existence or validity of any patent rights in connection therewith. If a patent holder or patent applicant has filed a statement of assurance via an Accepted Lette
17、r of Assurance, then the statement is listed on the IEEE-SA Website at http:/standards.ieee.org/about/sasb/patcom/patents.html. Letters of Assurance may indicate whether the Submitter is willing or unwilling to grant licenses under patent rights without compensation or under reasonable rates, with r
18、easonable terms and conditions that are demonstrably free of any unfair discrimination to applicants desiring to obtain such licenses. Copyright 2013 IEEE. All rights reserved. vEssential Patent Claims may exist for which a Letter of Assurance has not been received. The IEEE is not responsible for i
19、dentifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims, or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing a
20、greements are reasonable or non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Associa
21、tion. Copyright 2013 IEEE. All rights reserved. viParticipants At the time this IEEE guide was completed, the Diagnostic Field Testing Power Transformers and Reactors Working Group had the following membership: Jane Ann Verner, Chair Loren Wagenaar, Vice Chair Kipp Yule, Secretary Richard Amos Raj A
22、huja Jerry Allen William Bartley Wallace Binder Kent Brown Bill Chiu Larry Coffeen Jerry Cockran John Crouse Eric Davis Don Dorris Jefferson Foley Bruce Forsyth Mary Foster Ramon Garcia James Gardner Robert Ganser Sr. Prodipto Ghosh Jorge Gonzalez Jerry Harlan David Harris John Herron Gary Hoffman M
23、ike Horning Wayne Johnson Matthew Kennedy Joe Kelly C. J. Kalra Alexander Kraetge Michael Lau Mario Locarno Eberhard Lemke John Luksich Andre Lux John Matthews Susan McNelly Steve McGovern Vinay Mehrotra Michael Miller Paul Mushill Poorvi Patel Mark Perkins Donald Platts Lewis Powell Paulette Powell
24、 Tom Prevost John Progarr Mark Rivers Oleg Roizman Kirk Robbins Mark Roberts Hakan Sahin O. Paul Salvatto Daniel Sauer Craig Stiegemeier Jin Sim Charles Sweetser James Thompson Robert Thompson Dharma Vir Dieter Wagner Barry Ward Peter Werelius Jennifer Yu Peter Zhao Copyright 2013 IEEE. All rights r
25、eserved. viiThe following members of the individual balloting committee voted on this guide. Balloters may have voted for approval, disapproval, or abstention. Michael Adams Carlo Arpino Roberto Asano Peter Balma Martin Baur Barry Beaster W. J. Bill Bergman Steven Bezner Wallace Binder Thomas Bishop
26、 Thomas Blackburn W. Boettger Paul Boman Jeffrey Britton Bill Brown Kent Brown William Byrd Thomas Callsen Paul Cardinal Antonio Cardoso Juan Castellanos Stephen Conrad John Crouse William Darovny Alan Darwin Scott Digby Dieter Dohnal Gary Donner Randall Dotson Fred Elliott James Fairris Jorge Ferna
27、ndez Daher Rabiz Foda Joseph Foldi Bruce Forsyth Marcel Fortin Frank Gerleve David Gilmer Jalal Gohari James Graham William Griesacker Randall C. Groves Edward Gulski Bal Gupta John Harley J. Harlow David Harris Roger Hayes Martin Hinow Gary Hoffman Philip Hopkinson Charles Johnson Laszlo Kadar C. K
28、alra Gael Kennedy George Kennedy Mohamed Abdel Khalek Yuri Khersonsky Morteza Khodaie James Kinney Joseph L. Koepfinger Jim Kulchisky Saumen Kundu John Lackey Chung-Yiu Lam Jeffrey LaMarca Stephen Lambert Thomas La Rose Aleksandr Levin Mario Locarno Thomas Lundquist Greg Luri J. Dennis Marlow Lee Ma
29、tthews James McIver David McKinnon Susan McNelly Joseph Melanson Tom Melle Michael Miller T. David Mills Daniel Mulkey Jerry Murphy Ryan Musgrove Dennis Neitzel Michael S. Newman Joe Nims Lorraine Padden Bansi Patel Dhiru Patel J. Patton Brian Penny Christopher Petrola Donald Platts Alvaro Portillo
30、Lewis Powell Tom Prevost Moises Ramos Jean-Christophe Riboud Johannes Rickmann Michael Roberts Oleg Roizman John Rossetti James Rossman Marnie Roussell Thomas Rozek Dinesh Sankarakurup Daniel Sauer Bartien Sayogo Ewald Schweiger Devki Sharma Suresh Shrimavle Gil Shultz Hyeong Sim James Smith Jerry S
31、mith Steve Snyder Brian Sparling Gary Stoedter Michael Swearingen Charles Sweetser Ed teNyenhuis Malcolm Thaden Juan Thierry James Thompson Robert Thompson Eric Udren John Vergis Jane Ann Verner Loren Wagenaar David Wallach Barry Ward Peter Werelius Kenneth White John Wilson Jonathan Woodworth John
32、Yale Jian Yu Kipp Yule Luis Zambrano James Ziebarth Copyright 2013 IEEE. All rights reserved. viiiWhen the IEEE-SA Standards Board approved this guide on 6 March 2013, it had the following membership: John Kulick, Chair David J. Law, Vice Chair Richard H. Hulett, Past Chair Konstantinos Karachalios,
33、 Secretary Masayuki Ariyoshi Peter Balma Farooq Bari Ted Burse Wael William Diab Stephen Dukes Jean-Philippe Faure Alexander Gelman Mark Halpin Gary Hoffman Paul Houz Jim Hughes Michael Janezic Joseph L. Koepfinger* Oleg Logvinov Ron Petersen Gary Robinson Jon Walter Rosdahl Adrian Stephens Peter Su
34、therland Yatin Trivedi Phil Winston Yu Yuan *Member Emeritus Also included are the following nonvoting IEEE-SA Standards Board liaisons: Richard DeBlasio, DOE Representative Michael Janezic, NIST Representative Don Messina IEEE Standards Program Manager, Document Development Erin Spiewak IEEE Standards Program Manager, Technical Program Development
