STAS 6599 2-1982 GEOMETRY OF THE ACTIVE PART OF CUTTING TOOLS General convorsion formulae to reiate tool and Working angles《刀具活动部分几何形状 相关工具通用转换公式和工作角度 》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

QB T 1924-1993 菜刀.pdf

QB T 1925.1-1993 一般用途镀锌低碳钢丝编织网.方孔网（镀锌低碳钢丝布）.pdf

QB T 1925.2-1993 一般用途镀锌低碳钢丝编织网 六角网.pdf

QB T 1925.3-1993 一般用途镀锌低碳钢丝编织网 波纹方孔网.pdf

QB T 1926-1993 GT6J型300L夹层锅.pdf

QB T 1926-2006 夹层锅.pdf

QB T 1927.1-1993 制浆造纸企业设备能量平衡计算方法通则.pdf

QB T 1927.10-1993 CEH三段漂白系统能量平衡及热效率计算方法.pdf

QB T 1927.11-1993 胶料制备系统能量平衡及热效率计算方法.pdf