AECMA PREN 2520-1982 Titanium TI-P04 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa Forgings De Less Than or Equal to 200 mm Aerospace Series Edition 1《航空航天系列钛锻件 TI.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

STAS 9222-1980 Machines and equipments for digging EXCAVATORS WITH ONE BUCKET Main parameters《挖掘机器和设备 一个铲斗的挖掘机 主要参数 》.pdf

STAS 9224-1973 Precision bolls HEXAGON SOCKET HEAD CAP SCREWS SHALLOW HEAD AND RECESS FOR WRENCH KEY《精密铃 六角头螺栓插座 扳手楔片的浅头和凹口 》.pdf

STAS 9225-1973 Precision bolts HEXAGON SOCKET HEAD CAP SCREWS WITH REDUCED HEIGHT OF HEAD《精密螺栓 头部降低的六角插座头帽螺栓 》.pdf

STAS 9226-1973 BANDAGES FOR TRAMWAY WHEELS General technical requirements for quality《电车砂轮轮箍 一般质量技术要求 》.pdf

STAS 9227-1986 SISAL CORD FOR STEEL WIRE ROPES《钢丝绳用西沙尔麻索 》.pdf

STAS 9228-1973 NON-FERROUS METAL RIVETS General requirements for quality《有色金属铆钉 质量的一般规定 》.pdf

STAS 9229-1980 NON-FERROUS METALS AND ALLOYS SNAP HEAD RIVETS《有色金属和合金 半圆头铆钉 》.pdf

STAS 9230-1980 NON-FERROUS METALS AND ALLOYS COUNTERSUNK HEAD RIVETS《有色金属和合金沉头铆钉 》.pdf

STAS 9231-1980 NON-FERROU S-METALS AND ALLOYS COUNTERSUNK HEAD RIVETS Dimensions《有色金属和合金沉头铆钉 尺寸 》.pdf