ASME RTP-1-2000 Reinforced Thermoset Plastic Corrosion Resistant Equipment (RTP-1 - 2000)《增强热固塑料耐腐蚀设备》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AECMA PREN 3142-1990 Aerospace Series Rivets Solid Universal Head in Nickel Base Alloy NI-P11 Issue P 1《耐高温镍基合金钢NI-P11制带通用头的全铆钉.英制系列》.pdf

AECMA PREN 3143-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 cadmium plated inch base series Edition P 1《航空航天系列.镍合金 NI-P11镉板 100°标称.pdf

AECMA PREN 3144-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 inch base series Edition P 1《航空航天系列.镍合金 NI-P11 100°标称埋头实心铆钉 英制系列.版本P1》.pdf

AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P .pdf

AECMA PREN 3146-1995 Aerospace Series Round Bars with Close Tolerances Hot Formed in Steel 6 mm D Less Than or Equal to 250 mm Dimensions Edition P 1《航空航天系列.热轧钢制圆形棒材紧公差6mm小于或等于直径D小.pdf

AECMA PREN 3148-1989 Aerospace Series Shank Nuts Self-Locking Flange Restrained Installation Procedure Issue P 2《航空航天系列自锁受限制法兰螺母安装程序.P2版》.pdf

AECMA PREN 3149-1987 Aerospace Series Shank Nuts Metric Installation Holes Issue P 1《航空航天系列米制安装孔螺母.P1版》.pdf

AECMA PREN 3150-1988 Aerospace Series Pin Shoulder Headless in NI-P100HT (INCO 718) Issue P 1《耐热镍基NI-P100HT型合金制肩部无头轴销》.pdf

AECMA PREN 3151-1988 Aerospace Series Plain Dowels in NI-P100HT (Inconel 718) Issue P 1《耐热镍基合金NI-P100HI(因康718)制无槽圆柱销》.pdf