1、Site LicenseAWS B2.1-5A-223:1999 (R2009)An American National StandardStandard Welding ProcedureSpecification (SWPS) forShielded Metal ArcWelding of Chromium-Molybdenum Steel(M-5A/P-5A), E9018-B3,1/8 through 1/2 in.Thick,As-Welded Condition;1/8 through 1-1/2 in.Thick, PWHT Condition,Primarily PipeApp
2、lications550 N.W. LeJeune Road, Miami, FL 33126AWS B2.1-5A-223:1999 (R2009)An American National StandardApproved by theAmerican National Standards InstituteDecember 8, 1999Reaffirmed: May 29, 2009Standard Welding Procedure Specification (SWPS) forShielded Metal Arc Welding of Chromium-Molybdenum Ste
3、el (M-5A/P-5A), E9018-B3,1/8 through 1/2 in. Thick, As-Welded Condition;1/8 through 1-1/2 in. Thick, PWHT Condition,Primarily Pipe Applications1st EditionPrepared by theAmerican Welding Society (AWS) B2 Committee on Procedure and Performance QualificationUnder the Direction of theAWS Technical Activ
4、ities CommitteeApproved by theAWS Board of DirectorsAbstractThis standard contains the essential welding variables for chromium-molybdenum steel in the thickness range of 1/8through 1/2 in. in the as-welded condition; or 1/8 through 1-1/2 in. in the postweld heat treated (PWHT) condition, usingmanua
5、l shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, thefiller metal specifications, and the allowable joint designs for groove welds. This standard welding procedure specification(SWPS) was developed primarily for pipe applications.iiAWS B2
6、.1-5A-223:1999 (R2009)International Standard Book Number: 0-87171-599-6American Welding Society550 N.W. LeJeune Road, Miami, FL 33126 2000 by American Welding SocietyAll rights reservedPrinted in the United States of AmericaReaffirmed: May 29, 2009iiiAWS B2.1-5A-223:1999 (R2009)Statement on the Use
7、of American Welding Society StandardsAll standards (codes, specifications, recommended practices, methods, classifications, and guides) of the AmericanWelding Society (AWS) are voluntary consensus standards that have been developed in accordance with the rules of theAmerican National Standards Insti
8、tute (ANSI). When AWS American National Standards are either incorporated in, ormade part of, documents that are included in federal or state laws and regulations, or the regulations of other govern-mental bodies, their provisions carry the full legal authority of the statute. In such cases, any cha
9、nges in those AWSstandards must be approved by the governmental body having statutory jurisdiction before they can become a part ofthose laws and regulations. In all cases, these standards carry the full legal authority of the contract or other documentthat invokes the AWS standards. Where this cont
10、ractual relationship exists, changes in or deviations from requirementsof an AWS standard must be by agreement between the contracting parties.AWS American National Standards are developed through a consensus standards development process that bringstogether volunteers representing varied viewpoints
11、 and interests to achieve consensus. While the AWS administers theprocess and establishes rules to promote fairness in the development of consensus, it does not independently test, evalu-ate, or verify the accuracy of any information or the soundness of any judgments contained in its standards.AWS d
12、isclaims liability for any injury to persons or to property, or other damages of any nature whatsoever, whetherspecial, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, or relianceon this standard. AWS also makes no guarantee or warranty as to
13、the accuracy or completeness of any informationpublished herein.In issuing and making this standard available, AWS is neither undertaking to render professional or other services for oron behalf of any person or entity, nor is AWS undertaking to perform any duty owed by any person or entity to someo
14、neelse. Anyone using these documents should rely on his or her own independent judgment or, as appropriate, seek theadvice of a competent professional in determining the exercise of reasonable care in any given circumstances. It isassumed that the use of this standard and its provisions are entruste
15、d to appropriately qualified and competent personnel.This standard may be superseded by the issuance of new editions. Users should ensure that they have the latest edition.Publication of this standard does not authorize infringement of any patent or trade name. Users of this standard acceptany and a
16、ll liabilities for infringement of any patent or trade name items. AWS disclaims liability for the infringement ofany patent or product trade name resulting from the use of this standard.Finally, the AWS does not monitor, police, or enforce compliance with this standard, nor does it have the power t
17、o do so.On occasion, text, tables, or figures are printed incorrectly, constituting errata. Such errata, when discovered, are postedon the AWS web page (www.aws.org).Official interpretations of any of the technical requirements of this standard may only be obtained by sending a request, inwriting, t
18、o the appropriate technical committee. Such requests should be addressed to the American Welding Society,Attention: Managing Director, Technical Services Division, 550 N.W. LeJeune Road, Miami, FL 33126 (see Annex A).With regard to technical inquiries made concerning AWS standards, oral opinions on
19、AWS standards may be rendered.These opinions are offered solely as a convenience to users of this standard, and they do not constitute professionaladvice. Such opinions represent only the personal opinions of the particular individuals giving them. These individuals donot speak on behalf of AWS, nor
20、 do these oral opinions constitute official or unofficial opinions or interpretations ofAWS. In addition, oral opinions are informal and should not be used as a substitute for an official interpretation.This standard is subject to revision at any time by the AWS B2 Committee on Procedure and Perform
21、ance Qualification.It must be reviewed every five years, and if not revised, it must be either reaffirmed or withdrawn. Comments (recom-mendations, additions, or deletions) and any pertinent data that may be of use in improving this standard are requiredand should be addressed to AWS Headquarters. S
22、uch comments will receive careful consideration by the AWS B2Committee on Procedure and Performance Qualification and the author of the comments will be informed of theCommittees response to the comments. Guests are invited to attend all meetings of the AWS B2 Committee on Procedureand Performance Q
23、ualification to express their comments verbally. Procedures for appeal of an adverse decisionconcerning all such comments are provided in the Rules of Operation of the Technical Activities Committee. A copy ofthese Rules can be obtained from the American Welding Society, 550 N.W. LeJeune Road, Miami
24、, FL 33126.ivAWS B2.1-5A-223:1999 (R2009)Personnel (Reaffirmation)AWS B2 Committee on Procedure and Performance QualificationJ. J. Fluckiger, Chair Idaho National LaboratoryJ. L. Cooley, Vice Chair J. C. and Associates, IncorporatedE. W. Beckman, 2nd Vice Chair International Training Institute S. Mo
25、rales, Secretary American Welding SocietyL. P. Connor ConsultantW. D. Doty Doty and Associates, IncorporatedE. H. Gray U.S. Nuclear Regulatory CommissionB. J. Hable Ford Motor CompanyM. Herrle Arise, IncorporatedR. A. LaFave Elliott Company, IncorporatedK. Y. Lee The Lincoln Electric CompanyK. M. Mc
26、Tague Factory MutualA. S. Olivares HSB Global StandardsJ. F. Pike NASA Langley Research CenterW. M. Ruof Bechtel Plant Machinery, IncorporatedJ. J. Sekely Welding Services, IncorporatedM. R. Stone Canadian Welding BureauG. M. Wisbrock Lockheed Martin Missiles and Fire Control (Retired)R. K. Wiswesse
27、r Welder Training and Testing InstituteAdvisors to the AWS B2 Committee on Procedure and Performance QualificationW. L. Ballis ConsultantJ. D. Duncan ConsultantN. K. Kanaya BEAR Testing LaboratoryB. B. MacDonald ConsultantA. W. Sindel Alstom Power, IncorporatedC. E. Speader, Jr. Aristech Chemical Co
28、rporationW. J. Sperko Sperko Engineering ServicesR. F. Waite ConsultantAWS B2D Subcommittee on Standard Welding Procedure SpecificationsJ. J. Sekely, Chair Welding Services, IncorporatedS. Morales, Secretary American Welding SocietyL. P. Connor ConsultantW. D. Doty Doty and Associates, IncorporatedJ
29、. J. Fluckiger Idaho National LaboratoryK. M. McTague Factory MutualW. M. Ruof Bechtel Plant Machinery, IncorporatedAdvisor to the AWS B2D Subcommittee on Standard Welding Procedure SpecificationsG. M. Wisbrock Lockheed Martin Missiles and Fire Control (Retired)vAWS B2.1-5A-223:1999 (R2009)Personnel
30、 (Original)*AdvisorAWS B2 Committee on Procedure and Performance QualificationJ. J. Sekely, Chair Eichleay CorporationG. M. Wisbrock, 1st Vice Chair Lockheed Martin Missiles and Fire ControlJ. J. Fluckiger, 2nd Vice Chair Bechtel Babcock 1/8 through 1-1/2 in. Thick, PWHT Condition,Primarily Pipe App
31、lications, but is included for informational purposes only.The American Welding Society and the Welding Research Council have joined in a cooperative effort to generatestandard welding procedures for industry. The need for pretested welding procedures that are supported by adequate testdata and that
32、 satisfy the technical requirements for the commonly used construction codes and specifications has beenexpressed by many individuals and organizations. The purpose of a welding procedure qualification is to provide test datafor assessing the properties of a weld joint.This Welding Procedure Specifi
33、cation is an outgrowth of the coordinated work of the Welding Procedures Committee ofthe Welding Research Council and the AWS B2 Committee on Welding Procedure and Performance Qualification. TheWelding Procedures Committee has provided the test data documented by a Summary of Procedure Qualification
34、 Records.The welding terms used in this specification shall be interpreted in accordance with the definitions given in the latestedition of AWS A3.0, Standard Welding Terms and Definitions, Including Terms for Adhesive Bonding, Brazing, Soldering,Thermal Cutting, and Thermal Spraying.The AWS Committ
35、ee on Welding Procedure and Performance Qualification was formed in 1979 to provide weldingstandards concerning the subject of qualification. The primary document developed by this committee is AWS B2.1,Specification for Welding Procedure and Performance Qualification. This document established the
36、foundation andframework for Standard Welding Procedure Specifications.Comments and suggestions for the improvement of this standard are welcome. They should be sent to the Secretary,AWS B2 Committee on Welding Procedure and Performance Qualification, American Welding Society, 550 N.W.LeJeune Road, M
37、iami, FL 33126.AWS B2.1-5A-223:1999 (R2009)Page 1 of 13Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-company use only is granted by the American Welding SocietyShielded Metal Arc Welding of Chromium-Molybdenum Steel(M-5A/P-5A), E9018-B3, 1/8 through 1/2 in. Thick,A
38、s-Welded Condition; 1/8 through 1-1/2 in. Thick,PWHT Condition, Primarily Pipe ApplicationsWelding Research CouncilSupporting PQR Numbers:200704, 200705, 200716, 200718, 200740, 200741,200744, 200745, 200797, 200827, 200838,Requirements forApplication of SWPSsScope. The data to support this Standard
39、 WeldingProcedure Specification (SWPS) were derived fromthe above-listed Procedure Qualification Records(PQRs) which were reviewed and validated underthe auspices of the Welding Research Council. ThisSWPS is not valid using conditions and variablesoutside the ranges listed. The American WeldingSocie
40、ty considers that this SWPS presents infor-mation for producing an acceptable weld using theconditions and variables listed. The user needs asignificant knowledge of welding and accepts fullresponsibility for the performance of the weld andfor providing the engineering capability, qualifiedpersonnel
41、, and proper equipment to implement thisSWPS.Application. This SWPS is to be used only aspermitted by the applicable fabrication document(s);such as code, specification, or contract docu-ment(s). The fabrication document(s) should specifythe engineering requirements such as design, needfor heat trea
42、tment, fabricating tolerances, qualitycontrol, and examination and tests applicable to theend product.Users Responsibility. An SWPS does not replaceor substitute for fabrication codes, specifications,contract requirements, or capability and judgmenton the part of the user. An SWPS is to be used only
43、as permitted by the applicable fabrication code,specification, or contract document.The ability to produce production welds havingproperties suitable for the application depends uponsupplementing the SWPS with appropriate perfor-mance qualification tests and sound engineeringjudgment. The user is re
44、sponsible for the quality andperformance of the final product in accordance withthe provisions of the fabrication document(s).Supplementary Instructions. To adapt this SWPSto a specific application, a user may issue supple-mentary instructions. Such instructions may consistof tighter fit-up toleranc
45、es, higher minimum preheattemperature or any other instructions necessary toproduce a weldment that meets the requirements ofthe fabrication document(s). These instructions shallnot be less restrictive than provided in the SWPS.Safety. Safety precautions shall conform to thelatest edition of ANSI Z4
46、9.1, Safety in Welding,Cutting, and Allied Processes, published by theAmerican Welding Society.This specification may involve hazardous materials,operations, and equipment. The specification doesnot purport to address all of the safety problemsassociated with its use. It is the responsibility of the
47、user to establish appropriate safety and health prac-tices. The user should determine the applicability ofany regulatory limitations prior to use.Standard Welding Procedure Specification (SWPS)Permission to reproduce for intra-company use only is granted by the American Welding SocietyAWS B2.1-5A-22
48、3:1999 (R2009)Page 2 of 13LIMITATIONSThis procedure is not qualified for notch toughness applications.WELDING PROCESSESWelding Processes: Shielded Metal Arc Welding (SMAW)Method of Application: ManualBASE METALSBase Metal:1Low-alloy steel, M-5A, or P-5A to M-5A, or P-5AThickness Range: Groove welds:
49、 1/8 through 1/2 in. thick in the as-welded condition; or 1/8through 1-1/2 in. thick in the PWHT conditionFillet welds: 1/8 in. min for either conditionPipe Diameter: Groove welds: 3/4 in. nominal pipe size (NPS) minFillet welds: 1/2 in. NPS minFILLER METALSFiller Metal Specification:1AWS A5.5 or ASME SFA 5.5A-Number 4, F-Number 4Classification: E9018-B3; E8018-B3L may also be used when specified by the fabricationdocument(s) except that E8018-B3L shall not be used where the design tem-perature exceeds 850F.Deposit Thickness Range: Groove welds: 1/2 in. max plus reinforcement in the as-we
