1、BS EN 12574-1:2017Stationary waste containersPart 1: Containers with a capacity up to 10000 l with flat or dome lid(s), for trunnion,double trunnion or pocket lifting device Dimensions and designBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 12574-1:2017 BRITI
2、SH STANDARDNational forewordThis British Standard is the UK implementation of EN 12574-1:2017.It supersedes BS EN 12574-1:2006 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/508/1, Waste containers and associated lifting deviceson refuse collection v
3、ehicles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2017. Published by BSI
4、Standards Limited 2017ISBN 978 0 580 90167 6ICS 13.030.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2017.Amendments/Corrigenda issued since public
5、ationDate Text affectedBS EN 12574-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12574-1 February 2017 ICS 13.030.40 Supersedes EN 12574-1:2006English Version Stationary waste containers - Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double t
6、runnion or pocket lifting device - Dimensions and design Conteneurs fixes dchets - Partie 1 : Conteneurs de capacit allant jusqu 10 000 l couvercle(s) plat(s) ou bomb(s), pour lve-conteneurs prhension par tourillons, double tourillon ou manchons - Dimensions et conception Stationre Abfallsammelbehlt
7、er - Teil 1: Behlter mit einem Volumen bis 10 000 l mit Flach- oder Schiebedeckel(n), fr Schttungen mit Zapfenaufnahme, Doppelzapfenaufnahme oder Taschenaufnahme - Mae und Formgebung This European Standard was approved by CEN on 21 November 2016. CEN members are bound to comply with the CEN/CENELEC
8、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
9、 any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the officia
10、l versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No
11、rway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All right
12、s of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12574-1:2017 EBS EN 12574-1:2017EN 12574-1:2017 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Volumes 6 5 Dimensions and design . 7 6 N
13、ominal load and total permissible mass 7 7 Safety and health requirements 7 8 Testing . 7 9 Marking . 8 10 Designation 8 Annex A (informative) Adeviations 23 Bibliography . 24 BS EN 12574-1:2017EN 12574-1:2017 (E) 3 European foreword This document (EN 12574-1:2017) has been prepared by Technical Com
14、mittee CEN/TC 183 “Waste management”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn at
15、 the latest by August 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12574-1:2006. This European Standard is one p
16、art of the series of standards EN 12574 about “Stationary waste containers” comprising the following parts: Part 1: Containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device Dimensions and design; Part 2: Performance requirements and t
17、est methods; Part 3: Safety and health requirements; According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finlan
18、d, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 12574-1:2017EN 12574
19、-1:2017 (E) 4 1 Scope This part of EN 12574 specifies dimensions and requirements of stationary waste containers (in the text also called containers) without wheels or with wheels for positioning purposes only, with flat or dome lid(s) and capacities up to 10 000 l for trunnion, double trunnion or p
20、ocket lifting devices. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced docume
21、nt (including any amendments) applies. EN 1501-5, Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles EN 12574-2:2017, Stationary waste containers - Part 2: Performance requirements and test methods EN 12574-3:2017, Stati
22、onary waste containers - Part 3: Safety and health requirements EN 840-1:2012, Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design 3 Terms and definitions For the purposes of this document, the followin
23、g terms and definitions apply. NOTE Terms for components of waste containers and lifting devices in three languages are given in Annex A of EN 8401:2012. 3.1 stationary waste container appropriately designed container without wheels or fitted with them, for positioning empty containers only, to temp
24、orarily store waste 3.2 lifting device structure which picks-up, tilts and empties containers into the RCV (Refuse Collection Vehicle) and returns the container to the ground 3.3 trunnion lifting device lifting device in which the picking-up system of the RCV consists of a pair of arms with automati
25、c locking mechanism to fit the trunnion to retain the container during emptying 3.4 double trunnion lifting device lifting device in which the picking-up system of the RCV consists of a pair of arms with automatic locking mechanism to fit the trunnions and to retain the container during emptying Not
26、e 1 to entry: The double trunnion picking-up system supports the torsional moment during the tilting motion. BS EN 12574-1:2017EN 12574-1:2017 (E) 5 3.5 pocket lifting device lifting device in which the picking-up system of the RCV consists of a pair of arms to fit the pockets located on either side
27、 of the container 3.6 volume total space inside the container when the lid is closed 3.6.1 nominal volume volume of the waste container as declared by the manufacturer 3.6.2 usable volume inside volume of the container that can be filled with waste Note 1 to entry: The usable volume is based on spec
28、ific application depending on the collected material and on the shape of the cover. It corresponds to: the volume below the filling apertures, in case of special filling apertures the volume of the tank, in case of collection of liquid material or in case of customer request the total space inside t
29、he container when the lid is closed 3.7 nominal load load, which is calculated by density values of material multiplied by the nominal volume (3.6.1) Note 1 to entry: Clause 6 3.8 total permissible mass nominal load plus the dead mass of the container including all attached components lifted togethe
30、r 3.9 capacity for the purpose of this standard volume and capacity are deemed to be the same 3.10 interface for trunnion lifting device distance at the base of the trunnion where it meets the container Note 1 to entry: see dimension number 13 in Figure 1 3.10.1 wide interface interface for trunnion
31、 lifting device of (1 760 10) mm 3.10.2 narrow interface interface for trunnion lifting device of (+20101 260 ) mm BS EN 12574-1:2017EN 12574-1:2017 (E) 6 3.11 interface for pocket lifting device distance between the two lateral boxes stopping the arms before lifting phase 3.11.1 wide interface inte
32、rface for pocket lifting device of (1 820 15) mm 3.11.2 medium interface interface for pocket lifting device of (1 710 15) mm 3.11.3 narrow interface interface for pocket lifting device of (1 600 15) mm 3.12 disabled access specific ergonomic devices and/or solutions in the waste containers to facil
33、itate access by disabled persons 3.13 lid set of parts closing the top of the body of a waste container including one or more flaps, and including all the related components 3.14 locked lid lid which is closed so that it cannot be opened manually by a single person; this locked lid is usually opened
34、 by a vehicle refuse collection vehicle during emptying operations 3.15 access flap part of the lid which is opened for waste introduction 3.16 hinged access flap flap that can be opened for waste introduction by a rotation around a hinge axle which is part of the lid Note 1 to entry: See an example
35、 in Figure 4, type 4, with hinged lid open and tilted cover. 3.17 sliding flap flap that can be opened only by a sliding movement 3.18 locked flap part of the lid carrying filling aperture(s) or mechatronics device(s) which it is not opened for waste introduction 4 Volumes The nominal volume of the
36、containers shall be up to 10 000 l (see Tables 1, 2, 3, 4 and 5). The tolerance on nominal volume is 5 %. For measuring methods of volume, see EN 12574-2:2017. BS EN 12574-1:2017EN 12574-1:2017 (E) 7 5 Dimensions and design 5.1 The design of the containers need not correspond strictly to the drawing
37、s given in Figures 1 to 8. However, the dimensions given in Tables 1 to 5 and Figures 1 to 8 shall be respected. 5.2 The container shall be constructed so that when it is unloaded or loaded with a nominal load, it fits on an approved compatible lifting device according to EN 1501-5. 5.3 The lid(s) s
38、hall be permanently fitted to the body via at least two fixing points and have at least one hand grip or other means for opening. The force for opening the lid manually shall be maximum 50 N. For container lids needing a handling force higher than 50 N the lid shall be held self-acting in opened pos
39、ition. 5.4 Handles and their location shall be designed so that they neither injure the operator nor obstruct the emptying operation according to Clause 4 of EN 12574-3:2017. For handles fitted above trunnion, see Figure 2. 5.5 Sharp edges shall be avoided in all cases. Rounded edges with a radius m
40、ore than 1,4 mm are not considered as sharp edges. The surfaces shall be free of any foreign bodies or flaws. 5.6 The container should have a drain hole equipped with a suitable plug. The hole and the plug are optional. 5.7 If the container has positioning wheels, it shall be possible to immobilize
41、it by design or device. If wheels are fitted, the minimum diameter shall be 200 mm. 5.8 Disabled access: optional specific ergonomic devices and/or solutions in the waste container for facilitating the access of disabled could be for instance: opening/s in a special low level; manual handle located
42、at low level for opening the normal lid. 5.9 Locked lid: the force required to unlock a locked lid shall exceed 500 N however applied. Cover locking device shall be not demountable or by-passed without specific tool/s. 6 Nominal load and total permissible mass The container shall be constructed stro
43、ngly enough for the nominal load calculated by 0,25 kg/dm3or 0,40 kg/dm3(see EN 12574-2:2017, 4.5) multiplied by nominal volume. Total permissible mass shall be declared by the waste container manufacturer. 7 Safety and health requirements The containers shall meet the safety and health requirements
44、 according to EN 12574-3:2017. 8 Testing The container shall fulfil the performance and test requirements of EN 12574-2:2017. BS EN 12574-1:2017EN 12574-1:2017 (E) 8 9 Marking 9.1 Each container complying with the requirements of this European Standard shall be durably and readably marked on the bod
45、y in a visible part with: number of this European Standard “EN 12574-1/2/3”; for waste containers prepared for fitting mechatronic devices “EN 12574-1/2/3“; nominal volume; manufacturers name and trademark; total permissible mass, in kilograms; year and month of manufacturing. 9.2 Additional signs o
46、f quality, recycling, etc. are allowed. 10 Designation The containers complying with the requirements of this European Standard shall be designated as follows: Container - EN 125741/2/3 - 4500 - 3 - C - 1325 Description European Standard number “1/2/3” = the waste container in accordance with EN 125
47、741, EN 125742, EN 125743 Nominal volume, in litres Lid system for emptying operation Type 1 = without lid opener flat lid(s) asymmetrical Type 2 = without lid opener flat lid(s) symmetrical Type 3 = with lid opener dome lid(s) asymmetrical Type 4 = with lid opener dome lid(s) symmetrical Lateral re
48、ceiver A = trunnions wide interface B = double trunnions C = pockets narrow interface D = pockets medium interface E = pockets wide interface F = trunnions narrow interface Total permissible mass, in kilograms BS EN 12574-1:2017EN 12574-1:2017 (E) 9 The standard number can be “1/2/3”: this number ch
49、aracterizes the level of compliance with the features of the waste container: “1/2/3” in the case the waste container is according to EN 12574-1:2017, EN 12574-2:2017 and EN 12574-3:2017; Table 1 Dimensions related to containers for trunnion lifting device (Figures 1, 2, 3 and 4) Containers for trunnion lifting device Type F Type A Narrow interface Wide interface Item no Dimensions Dimensions Remarks mm mm 1 a1 3802010+1 880 10 important for the lifting device 2 a1 520 max. total width lid/s cl
