1、Miniature fusesPart 5: Guidelines for quality assessment of miniature fuse-linksBS EN 60127-5:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60127-5:2017. It isidentical to IEC 60127-5:2016. I
2、t supersedes BS EN 60127-5:1991 which willbe withdrawn on 9 December 2019.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/32, Fuses.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to in
3、clude all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 87677 6ICS 29.120.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This Br
4、itish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60127-5:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60127-5 February 2017 ICS 29.120.50 S
5、upersedes EN 60127-5:1991 English Version Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links (IEC 60127-5:2016) Coupe-circuit miniatures - Partie 5: Lignes directrices pour lvaluation de la qualit des lments de remplacement miniatures (IEC 60127-5:2016) Gerteschutzsi
6、cherungen - Teil 5: Leitlinien fr die Qualittsbewertung von G-Sicherungseinstzen (IEC 60127-5:2016) This European Standard was approved by CENELEC on 2016-12-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan
7、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (En
8、glish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees
9、of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,
10、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC
11、 All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60127-5:2017 E BS EN 60127-5:2017EN 60127-5:2017 2 European foreword The text of document 32C/526/FDIS, future edition 2 of IEC 60127-5, prepared by SC 32C “Miniature fuses“, of IEC/TC 32 “Fu
12、ses“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60127-5:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-09-09 latest date by
13、which the national standards conflicting with the document have to be withdrawn (dow) 2019-12-09 This document supersedes EN 60127-5:1991. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held respon
14、sible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60127-5:2016 was approved by CENELEC as a European Standard without any modification. BS EN 60127-5:2017EN 60127-5:2017 3 Annex ZA (normative) Normative references to international publ
15、ications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
16、ced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
17、www.cenelec.eu. Publication Year Title EN/HD Year IEC 60127-1 2006 Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links EN 60127-1 2006 + A1 2011 + A1 2011 + A2 2015 + A2 2015 IEC 60127-2 2014 Miniature fuses - Part 2: Cartridge fuse-links EN 60
18、127-2 2014 IEC 60127-3 2015 Miniature fuses - Part 3: Sub-miniature fuse-links EN 60127-3 2015 IEC 60127-4 2005 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types EN 60127-4 2005 + A1 2008 + A1 2009 + A2 2012 + A2 2013 IEC 60127-7 2015 Miniature fuses
19、 - Part 7: Miniature fuse-links for special applications EN 60127-7 2016 BS EN 60127-5:2017 2 IEC 60127-5:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Lot-by-lot inspection 7 4.1 Test conditions . 7 4.2 Non-destructive tests 7 4.
20、3 Destructive tests . 7 4.3.1 Destructive tests for IEC 60127-2 and IEC 60127-3 . 7 4.3.2 Destructive tests for IEC 60127-4 8 4.3.3 Destructive tests for IEC 60127-7 8 4.4 Acceptance criteria . 9 5 Periodic inspection 9 5.1 Reduced type tests for IEC 60127-2 or IEC 60127-3 . 9 5.2 Reduced type tests
21、 for IEC 60127-4 10 5.3 Reduced type tests for IEC 60127-7 10 Bibliography 12 Table 1 Primary characteristics (inspection level II) (Samples may be returned to the lot after inspection) 7 Table 2 (for IEC 60127-2 and IEC 60127-3) Time/current characteristic (IEC 60127-1:2006, 9.2.1) (Inspection leve
22、l S4, destructive test) 8 Table 3 (for IEC 60127-4) Time/current characteristic (IEC 60127-1:2006, 9.2.1) (Inspection level S4, destructive test) . 8 Table 4 (for IEC 60127-7) Time/current characteristic (IEC 60127-1:2006, 9.2.1) (Inspection level S4, destructive test) . 9 Table 5 Reduced type tests
23、 for IEC 60127-2 or IEC 60127-3 . 9 Table 6 Reduced type tests for IEC 60127-4 10 Table 7 Reduced type tests for IEC 60127-7 11 BS EN 60127-5:2017IEC 60127-5:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MINIATURE FUSES Part 5: Guidelines for quality assessment of miniature fuse-links
24、FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the
25、 electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted t
26、o technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International
27、 Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each tec
28、hnical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Pub
29、lications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their na
30、tional and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment s
31、ervices and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, s
32、ervants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the public
33、ation, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibil
34、ity that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60127-5 has been prepared by subcommittee 32C: Miniature fuses, of IEC technical committee 32: Fuses.
35、 This second edition cancels and replaces the first edition published in 1988. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) addition of new tables in 4.3; b) addition of new tables in Clause
36、5. The text of this standard is based on the following documents: FDIS Report on voting 32C/526/FDIS 32C/530/RVD BS EN 60127-5:2017 4 IEC 60127-5:2016 IEC 2016 Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This pub
37、lication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60127 series, published under the general title Miniature fuses, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until th
38、e stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60127-5:2017IEC 60127-5:2016 IEC 2016 5 INTRODUCTION According t
39、o the wish expressed by the users of miniature fuses, all standards, recommendations and other documents relating to miniature fuses should have the same publication number in order to facilitate reference to fuses in other specifications, for example, equipment specifications. Furthermore, a single
40、 publication number and subdivision into parts would facilitate the establishment of new standards, because clauses containing general requirements need not be repeated. The IEC 60127 series, under the general heading Miniature fuses, is thus subdivided as follows: IEC 60127-1, Miniature fuses Part
41、1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-2, Miniature fuses Part 2: Cartridge fuse-links IEC 60127-3, Miniature fuses Part 3: Sub-miniature fuse-links IEC 60127-4, Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surfac
42、e mount types IEC 60127-5, Miniature fuses Part 5: Guidelines for quality assessment of miniature fuse-links IEC 60127-6, Miniature fuses Part 6: Fuse-holders for miniature fuse-links IEC 60127-7, Miniature fuses Part 7: Miniature fuse-links for special applications IEC PAS 60127-8, Miniature fuses
43、Part 8: Fuse resistors with particular overcurrent protection IEC 60127-9, (Free for further documents) IEC 60127-10, Miniature fuses Part 10: User guide for miniature fuses BS EN 60127-5:2017 6 IEC 60127-5:2016 IEC 2016 MINIATURE FUSES Part 5: Guidelines for quality assessment of miniature fuse-lin
44、ks 1 Scope This part of IEC 60127 gives a guide for tests for assessing the quality of miniature fuse-links other than type tests, for the case where there is no complete agreement between the user and the manufacturer on what such tests apply. This document provides guidelines and limits generally
45、acceptable for quality control purposes by large scale users and manufacturers of miniature fuse-links. This document has validity for large scale series with lot sizes of 10 000 and more. It is also applicable for smaller lot sizes, if necessary. Periodic inspections by reduced type tests (Clause 5
46、) are intended to be carried out periodically in order to ensure that the level of technical performance previously verified by complete type tests as given in subsequent parts of the IEC 60127 series is maintained. The frequency of periodic in relation to lot-by-lot inspections is not established i
47、n this document. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced do
48、cument (including any amendments) applies. IEC 60127-1:2006, Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links IEC 60127-1:2006/AMD1:2011 IEC 60127-1:2006/AMD2:2015 IEC 60127-2:2014, Miniature fuses Part 2: Cartridge fuse-links IEC 60127-3:2015
49、, Miniature fuses Part 3: Sub-miniature fuse-links IEC 60127-4:2005, Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types IEC 60127-4:2005/AMD1:2008 IEC 60127-4:2005/AMD2:2012 IEC 60127-7:2015, Miniature fuses Part 7: Miniature fuse-links for special applications 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60127-1:2006, IEC 60127-4:2005 and IEC 60127-7:2015 appl
