1、 ISO 2015. CSA Group 2015. All rights reserved. Unauthorized reproduction is strictly prohibited.CAN/CSA-ISO 18134-3:15(ISO 18134-3:2015, IDT)National Standard of CanadaCAN/CSA-ISO 18134-3:15Solid biofuels Determination of moisture content Ovendry method Part 3: Moisture in general analysis sample(I
2、SO 18134-3:2015, IDT)Legal Notice for StandardsCanadian Standards Association (operating as “CSA Group”) develops standards through a consensus standards development process approvedby the Standards Council of Canada. This process brings together volunteers representing varied viewpoints and interes
3、ts to achieve consensusand develop a standard. Although CSA Group administers the process and establishes rules to promote fairness in achieving consensus, it doesnot independently test, evaluate, or verify the content of standards.Disclaimer and exclusion of liabilityThis document is provided witho
4、ut any representations, warranties, or conditions of any kind, express or implied, including, without limitation,implied warranties or conditions concerning this documents fitness for a particular purpose or use, its merchantability, or its non-infringementof any third partys intellectual property r
5、ights. CSA Group does not warrant the accuracy, completeness, or currency of any of the informationpublished in this document. CSA Group makes no representations or warranties regarding this documents compliance with any applicablestatute, rule, or regulation.IN NO EVENT SHALL CSA GROUP, ITS VOLUNTE
6、ERS, MEMBERS, SUBSIDIARIES, OR AFFILIATED COMPANIES, OR THEIR EMPLOYEES, DIRECTORS,OR OFFICERS, BE LIABLE FOR ANY DIRECT, INDIRECT, OR INCIDENTAL DAMAGES, INJURY, LOSS, COSTS, OR EXPENSES, HOWSOEVER CAUSED,INCLUDING BUT NOT LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES, LOST REVENUE, BUSINESS INTERRUP
7、TION, LOST OR DAMAGEDDATA, OR ANY OTHER COMMERCIAL OR ECONOMIC LOSS,WHETHER BASED IN CONTRACT,TORT (INCLUDING NEGLIGENCE), OR ANY OTHERTHEORY OF LIABILITY, ARISING OUT OF OR RESULTING FROM ACCESS TO OR POSSESSION OR USE OF THIS DOCUMENT, EVEN IF CSA GROUPHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH D
8、AMAGES, INJURY, LOSS, COSTS, OR EXPENSES.In publishing and making this document available, CSA Group is not undertaking to render professional or other services for or on behalf of anyperson or entity or to perform any duty owed by any person or entity to another person or entity. The information in
9、 this document is directedto those who have the appropriate degree of experience to use and apply its contents, and CSA Group accepts no responsibility whatsoeverarising in any way from any and all use of or reliance on the information contained in this document.CSA Group is a private not-for-profit
10、 company that publishes voluntary standards and related documents. CSA Group has no power, nor does itundertake, to enforce compliance with the contents of the standards or other documents it publishes.Intellectual property rights and ownershipAs between CSA Group and the users of this document (whe
11、ther it be in printed or electronic form), CSA Group is the owner, or the authorizedlicensee, of all works contained herein that are protected by copyright, all trade-marks (except as otherwise noted to the contrary), and allinventions and trade secrets that may be contained in this document, whethe
12、r or not such inventions and trade secrets are protected bypatents and applications for patents. Without limitation, the unauthorized use, modification, copying, or disclosure of this document mayviolate laws that protect CSA Groups and/or others intellectual property and may give rise to a right in
13、 CSA Group and/or others to seek legalredress for such use, modification, copying, or disclosure. To the extent permitted by licence or by law, CSA Group reserves all intellectualproperty rights in this document.Patent rightsAttention is drawn to the possibility that some of the elements of this sta
14、ndard may be the subject of patent rights. CSA Group shall not beheld responsible for identifying any or all such patent rights. Users of this standard are expressly advised that determination of the validity ofany such patent rights is entirely their own responsibility.Authorized use of this docume
15、ntThis document is being provided by CSA Group for informational and non-commercial use only. The user of this document is authorized to doonly the following:If this document is in electronic form: load this document onto a computer for the sole purpose of reviewing it; search and browse this docume
16、nt; and print this document if it is in PDF format.Limited copies of this document in print or paper form may be distributed only to persons who are authorized by CSA Group to have suchcopies, and only if this Legal Notice appears on each such copy.In addition, users may not and may not permit other
17、s to alter this document in any way or remove this Legal Notice from the attached standard; sell this document without authorization from CSA Group; or make an electronic copy of this document.If you do not agree with any of the terms and conditions contained in this Legal Notice, you may not load o
18、r use this document or make anycopies of the contents hereof, and if you do make such copies, you are required to destroy them immediately. Use of this documentconstitutes your acceptance of the terms and conditions of this Legal Notice.Standards Update ServiceCAN/CSA-ISO 18134-3:15December 2015Titl
19、e: Solid biofuels Determination of moisture content Oven dry method Part 3:Moisture in general analysis sampleTo register for e-mail notification about any updates to this publication go to shop.csa.ca click on CSA Update ServiceThe List ID that you will need to register for updates to this publicat
20、ion is 2424344.If you require assistance, please e-mail techsupportcsagroup.org or call 416-747-2233.Visit CSA Groups policy on privacy at www.csagroup.org/legal to find out how we protect yourpersonal information.Canadian Standards Association (operating as “CSA Group”), underwhose auspices this Na
21、tional Standard has been produced, waschartered in 1919 and accredited by the Standards Council ofCanada to the National Standards system in 1973. It is a not-for-profit, nonstatutory, voluntary membership association engaged instandards development and certification activities.CSA Group standards r
22、eflect a national consensus of producers andusers including manufacturers, consumers, retailers, unions andprofessional organizations, and governmental agencies. Thestandards are used widely by industry and commerce and oftenadopted by municipal, provincial, and federal governments in theirregulatio
23、ns, particularly in the fields of health, safety, building andconstruction, and the environment.Individuals, companies, and associations across Canada indicatetheir support for CSA Groups standards development byvolunteering their time and skills to Committee work and supportingCSA Groups objectives
24、 through sustaining memberships. The morethan 7000 committee volunteers and the 2000 sustainingmemberships together form CSA Groups total membership fromwhich its Directors are chosen. Sustaining memberships represent amajor source of income for CSA Groups standards developmentactivities.CSA Group o
25、ffers certification and testing services in support of andas an extension to its standards development activities. To ensurethe integrity of its certification process, CSA Group regularly andcontinually audits and inspects products that bear theCSA Group Mark.In addition to its head office and labor
26、atory complex in Toronto, CSAGroup has regional branch offices in major centres across Canadaand inspection and testing agencies in eight countries. Since 1919,CSA Group has developed the necessary expertise to meet itscorporate mission: CSA Group is an independent serviceorganization whose mission
27、is to provide an open and effectiveforum for activities facilitating the exchange of goods and servicesthrough the use of standards, certification and related services tomeet national and international needs.For further information on CSA Group services, write toCSA Group178 Rexdale BoulevardToronto
28、, Ontario, M9W 1R3CanadaA National Standard of Canada is a standard developed by an SCC-accredited Standards Development Organization (SDO), andapproved by the Standards Council of Canada (SCC), in accordancewith SCCs: Requirements and Guidance Accreditation forStandards Development Organizations, a
29、nd Requirements andGuidance Approval of National Standards of Canada Designation.More information on National Standard requirements can be foundat www.scc.ca.An SCC-approved standard reflects the consensus of a number ofexperts whose collective interests provide, to the greatestpracticable extent, a
30、 balance of representation of affectedstakeholders. National Standards of Canada are intended to make asignificant and timely contribution to the Canadian interest.SCC is a Crown corporation within the portfolio of Industry Canada.With the goal of enhancing Canadas economic competitiveness andsocial
31、 well-being, SCC leads and facilitates the development and useof national and international standards. SCC also coordinatesCanadian participation in standards development, and identifiesstrategies to advance Canadian standardization efforts.Accreditation services are provided by SCC to various custo
32、mers,including product certifiers, testing laboratories, and standardsdevelopment organizations. A list of SCC programs and accreditedbodies is publicly available at www.scc.ca.Users should always obtain the latest edition of a National Standardof Canada from the standards development organization r
33、esponsiblefor its publication, as these documents are subject to periodicreview.Standards Council of Canada600-55 Metcalfe StreetOttawa, Ontario, K1P 6L5CanadaCette Norme Nationale du Canada est disponible en versions franaise et anglaise.Although the intended primary application of this Standard is
34、 stated in its Scope, it is important to note that it remains the responsibility ofthe users to judge its suitability for their particular purpose.TMA trade-mark of the Canadian Standards Association, operating as “CSA Group”ICS 27.190; 75.160.10ISBN 978-1-4883-0298-5 2015 CSA GroupAll rights reserv
35、ed. No part of this publication may be reproduced in any form whatsoeverwithout the prior permission of the publisher.Published in December 2015 by CSA GroupA not-for-profit private sector organization178 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R3To purchase standards and related publication
36、s, visit our Online Store at shop.csa.caor call toll-free 1-800-463-6727 or 416-747-4044.TMA trade-mar k of the Canadian S tandards Association,operating as “CSA Group”Reviewed byPrepared byInternational Organization for StandardizationApproved bySolid biofuels Determination ofmoisture content Oven
37、dry method Part 3: Moisture in general analysissample(ISO 18134-3:2015, IDT)CAN/CSA-ISO 18134-3:15National Standard of CanadaCAN/CSA-ISO 18134-3:15Solid biofuels Determination of moisture content Oven drymethod Part 3: Moisture in general analysis sampleDecember 2015 2015 CSA GroupCSA/5CAN/CSA-ISO 1
38、8134-3:15Solid biofuels Determination of moisturecontent Oven dry method Part 3:Moisture in general analysis sample(ISO 18134-3:2015, IDT)CSA PrefaceThis is the first edition of CAN/CSA-ISO 18134-3, Solid biofuels Determination of moisture content Oven dry method Part 3: Moisture in general analysis
39、 sample, which is an adoption withoutmodification of the identically titled ISO (International Organization for Standardization) Standard18134-3 (first edition, 2015-09-01).For brevity, this Standard will be referred to as “CAN/CSA-ISO 18134-3” throughout.This Standard is one of three Standards deve
40、loped by ISO/TC 238 on Solid Biofuels that are beingadopted by CSA Group under the series Determination of moisture content Oven dry method, whichconsists of the following:a) ISO 18134-1, Part 1: Total moisture Reference method;b) ISO 18134-2, Part 2: Total moisture Simplified method; andc) ISO 1813
41、4-3, Part 3: Moisture in general analysis sample.This Standard describes the method of determining the moisture in the analysis test sample by drying inan oven. It is intended to be used for general analysis samples in accordance with EN 14780. Themethod described in this Standard is applicable to a
42、ll solid biofuels. The moisture content of solidbiofuels (as received) is always reported based on the total mass of the test sample (wet basis).This Standard was reviewed for Canadian adoption by the CSA Technical Committee on Solid Biofuels,under the jurisdiction of the CSA Strategic Steering Comm
43、ittee on Fuel Burning Equipment, and hasbeen formally approved by the Technical Committee. This Standard has been approved as a NationalStandard of Canada by the Standards Council of Canada. 2015 CSA GroupAll rights reserved. No part of this publication may be reproduced in any form whatsoever witho
44、ut theprior permission of the publisher. ISO material is reprinted with permission. Where the words “thisInternational Standard” appear in the text, they should be interpreted as “this National Standard ofCanada”.Inquiries regarding this National Standard of Canada should be addressed toCSA Group178
45、 Rexdale Boulevard,Toronto, Ontario, Canada M9W 1R31-800-463-6727 416-747-4000http:/csa.caCAN/CSA-ISO 18134-3:15Solid biofuels Determination of moisture content Oven drymethod Part 3: Moisture in general analysis sampleDecember 2015 2015 CSA GroupCSA/6To purchase standards and related publications,
46、visit our Online Store at shop.csa.ca or call toll-free1-800-463-6727 or 416-747-4044.This Standard is subject to review five years from the date of publication, and suggestions for itsimprovement will be referred to the appropriate committee. To submit a proposal for change, pleasesend the followin
47、g information to inquiriescsagroup.org and include “Proposal for change” in thesubject line:a) Standard designation (number);b) relevant clause, table, and/or figure number;c) wording of the proposed change; andd) rationale for the change.CSA Technical Committee on Solid BiofuelsS. Melin Delta Resea
48、rch Corp.,Delta, British ColumbiaCategory: Producer InterestChairS. Abercrombie Gildale Farms,St. Marys, OntarioCategory: Producer InterestM. Albright University of New Brunswick,Fredericton, New BrunswickCategory: General InterestK. Campbell Ontario Ministry of Natural Resources and Forestry,Sault
49、Ste. Marie, OntarioAssociateM. Douek FPInnovations,Saint-Laurent, QubecCategory: User InterestJ. Fisher Ontario Biomass Producers Cooperative Inc.,Kilbride, OntarioAssociateS. Hamel Ontario Power Generation,Nanticoke, OntarioCategory: User InterestD. Harfield Alberta Innovates Technology Futures,Vegreville, AlbertaCategory: General InterestR.K. Kanipayor Ontario Ministry of Natural Resources and Forestry,Sault Ste. Marie, OntarioCategory: General InterestG. Kutney Sixth Element Sustainable Management,Otta
