COVENIN 1038-1975 《委内瑞拉国家标准中针对建筑材料可燃性的测试方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

ASTM D4775-2004 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)《药物(不包括大批量的药房用药)用.pdf

ASTM D4776 D4776M-2010 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《H-试验法测定轮胎帘布和其他增强帘布对橡胶化合物的粘附性的标准试验方法》.pdf

ASTM D4776 D4776M-2018 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H试验程序测定轮胎帘线和其他增强帘线与橡胶混合物粘合性的标准试验方法》.pdf

ASTM D4776-2004 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure《用H-试验法测试轮胎帘布及其他增强软线与橡胶化合物粘着性的标准试验方法》.pdf

ASTM D4776-2004e1 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure.pdf

ASTM D4778-2005 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在传热条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2010 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《在热转换条件下测定冷却水的腐蚀和污染倾向的标准试验方法》.pdf

ASTM D4778-2015 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions《测定传热条件下冷却水腐蚀和结垢性的标准试验方法》.pdf

ASTM D4780-1995(2007) Standard Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的标准试验方法》.pdf