CSN CEN ISO TS 17892-12-2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 12 Determination of Atterberg limits《地质技术勘查和测试 土壤的实验室测试 第12部分：持续界限的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 09FTM15-2009 High Performance Industrial Gear Lubricants for Optimal Reliability《最佳可靠性用高性能工业齿轮润滑油》.pdf

AGMA 09FTM16-2009 Allowable Contact Stresses in Jacking Gear Units Used in the Offshore Industry《海上工业中使用的升降齿轮装置的允许接触应力》.pdf

AGMA 09FTM17-2009 Variation Analysis of Tooth Engagement and Load-Sharing in Involute Splines《渐开线花键中键齿管理和负载共享的差异分析》.pdf

AGMA 09FTM18-2009 Does the Type of Gear Action Affect the Appearance of Micropitting and Gear Life 《齿轮活动的类型是否会影响微点蚀外观和齿轮的寿命？》.pdf

AGMA 09FTM19-2009 The Effect of Gearbox Architecture on Wind Turbine Enclosure Size《齿轮箱结构对风力涡轮机外壳尺寸的影响》.pdf

AGMA 1003-H07-2007 Tooth Proportions for Fine-Pitch Spur and Helical Gearing《小模数直齿轮和斜齿轮用轮齿比例》.pdf

AGMA 1006-A97-1997 Tooth Proportions for Plastic Gears《塑料齿轮的齿比例》.pdf

AGMA 1012-G05-2005 Gear Nomenclature Definition of Terms with Symbols《齿轮命名、术语的定义和符号》.pdf

AGMA 10FTM01-2010 Complete Machining of Gear Blank and Gear Teeth《齿轮坯料和轮齿的成套加工》.pdf