CNS 11090-1997 Bronze screwed pulse gate valves (8 5kgf c㎡)《青铜螺纹口脉动闸阀（8 5KGF／C㎡）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2462-1990(2001) Standard Test Method for Moisture in Wool by Distillation With Toluene《用甲苯蒸馏法测定羊毛中水分的试验方法》.pdf

ASTM D2462-1990(2008) Standard Test Method for Moisture in Wool by Distillation With Toluene《用甲苯蒸馏法测定羊毛中水分的标准试验方法》.pdf

ASTM D2462-2013 Standard Test Method for Moisture in Wool by Distillation With Toluene《用甲苯蒸馏法测定羊毛中水分的标准试验方法》.pdf

ASTM D2463-1995(2005) Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers《吹模制热塑性塑料容器耐跌落冲击性的标准试验方法》.pdf

ASTM D2463-2010 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers《吹塑热塑塑料容器的耐跌落冲击性的标准试验方法》.pdf

ASTM D2463-2010a Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers《吹塑热塑塑料容器的耐跌落冲击性的标准试验方法》.pdf

ASTM D2463-2010b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers《吹塑热塑塑料容器的耐跌落冲击性能的标准试验方法》.pdf

ASTM D2463-2015 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers《吹模成型热塑性塑料容器耐落锤冲击性的标准试验方法》.pdf

ASTM D2464-2006 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings Schedule 80《加螺纹聚氯乙烯（PVC）塑料管配件的标准规范 表80》.pdf