CNS 11995-1987 Spare Parts for Motor Starters and Controllers in Ships《船用电动机起动器及控制器之备品供给基准》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM G181-2004 Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程》.pdf

ASTM G181-2004(2009) Standard Practice for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准实施规程》.pdf

ASTM G181-2011 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准试验方法》.pdf

ASTM G181-2011(2017) Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions《在润滑条件下进行活塞环和缸衬材料摩擦试验的标准试验方法》.pdf

ASTM G182-2006 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings《测定滚动体轴承破裂摩擦特性的标准试验方法》.pdf

ASTM G182-2013 Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings《测定滚动体轴承破裂摩擦特性的标准试验方法》.pdf

ASTM G182-2013(2018) Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings.pdf

ASTM G183-2005 Standard Practice for Field Use of Pyranometers Pyrheliometers and UV Radiometers《野外用日射强度计、太阳热量计和UV辐射计标准规程》.pdf

ASTM G183-2005(2010) Standard Practice for Field Use of Pyranometers Pyrheliometers and UV Radiometers《日辐射强度计 直接日照强度计和紫外线辐射计现场使用的标准操作规程》.pdf