CNS 7374-1981 Small Size Fairleads《小型导索器》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM A588 A588M-2010 Standard Specification for High-Strength Low-Alloy Structural Steel up to 50 ksi [345 MPa] Minimum Yield Point with Atmospheric Corrosion Resistance《耐大气腐蚀的最小屈服.pdf

ASTM A588 A588M-2015 Standard Specification for High-Strength Low-Alloy Structural Steel up to 50 ksi [345 MPa] Minimum Yield Point with Atmospheric Corrosion Resistance《耐大气腐蚀的最小屈服.pdf

ASTM A589 A589M-2006 Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe《水井用无缝和焊接碳素钢管的标准规范》.pdf

ASTM A589 A589M-2006(2012) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe《水井用无缝和焊接碳素钢管标准规格》.pdf

ASTM A589 A589M-2006(2018) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe.pdf

ASTM A592 A592M-2004 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels.pdf

ASTM A592 A592M-2004(2009) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels《压力容器用经回火和淬火的高强度低合金钢锻制附件和零件的.pdf

ASTM A592 A592M-2010 Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels《压力容器用经回火和淬火的高强度低合金钢锻制附件和零件的标准规格》.pdf

ASTM A592 A592M-2010(2015) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels《压力容器用高强度淬火和回火低合金钢锻造零件的标准规格》.pdf