CNS 9370-1982 Method of Test for Low Frequency (Below 3 MHz) Electrical Connectors (TP - 38 Cable Pull Out)《频率3MHZ以下电连接器检验法（电缆拉力TP–38）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 14FTM16-2014 The Modified Life Rating of Rolling Bearings - A Criterion for Gearbox Design and Reliability Optimization.pdf

AGMA 14FTM17-2014 The Impact of Surface Condition and Lubricant on Gear Tooth Friction.pdf

AGMA 14FTM18-2014 Precision Bevel Gears with Low Tooth Count.pdf

AGMA 14FTM19-2014 Application of ICME to Optimize Metallurgy and Improve Performance of Carburizable Steels.pdf

AGMA 14FTM20-2014 Influence of Central Members Radial Support Stiffness on Load Sharing Characteristics of Compound Planetary Gearsets.pdf

AGMA 14FTM21-2014 On the Correlation of Specific Film Thickness and Gear Pitting Life.pdf

AGMA 16FTM14-2016 Impact of Surface Condition and Lubricant on Effective Gear Tooth Friction Coefficient.pdf

AGMA 2000FTM1-2000 Minimization of In-Process Corrosion of Aerospace Gears《航空航天齿轮加工中腐蚀的最小化》.pdf

AGMA 2000FTM10-2000 Bending Fatigue Investigation under Variable Load Conditions on Case Carburized Gears《可变负荷条件下渗碳齿轮的弯曲疲劳调查》.pdf