1、ICS 83.080.01Kunststoffe Bestimmung der Viskositt mit einem Kugelfall-viskosimeter Teil 1: Verfahren nach Hppler (ISO 12058-1 : 1997)European Standard EN ISO 12058-1 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in acc
2、ordance with a decision taken by CEN/TC 249 to adopt, withoutalteration, International Standard ISO 12058-1 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (PlasticsStandards Committee), Technical Committee Polymer-Dispersionen.DIN 5
3、3217-2 and DIN EN ISO 2811-1 are the standard corresponding to International Standard ISO 2811-1referred to in clause 2 of the EN.AmendmentsDIN ISO 9371, March 1992 edition, has been superseded by the specifications of EN ISO 12058-1, whichis identical to ISO 12058-1.Previous editionDIN ISO 9371: 19
4、92-03.National Annex NAStandards referred to(and not included in Normative reference and Annex ZA)DIN 53217-2 Determining the density of paints, varnishes and similar coating materials by the pyc-nometer methodDIN EN ISO 2811-1 Paints and varnishes Determination of density Part 1: Pyknometer method(
5、ISO 2811-1 : 1997)Ref. No. DIN EN ISO 12058-1 : 2002-12English price group 08 Sales No. 110804.03DEUTSCHE NORM December 2002EN ISO 12058-1Continued overleaf.EN comprises 7 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin
6、. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Plastics Determination of viscosity using afalling-ball viscometerPart 1: Inclined-tube method (ISO 12058-1 : 1997)English version of DIN EN ISO 12058-1Supersedes DIN ISO 9371,March 1992 edit
7、ion.English versionICS 83.080.01 Supersedes EN ISO 9371 : 1995.Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungPlastics Determination of viscosity using afalling-ball viscometerPart 1: Inclined-tu
8、be method(ISO 12058-1 : 1997) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 12058-1 : 2002 EPlastiques Dtermination de laviscosit au moyen dun viscosimtre chute de bille Partie 1: Mthodedu tube inclin (ISO 12058-1 : 1997)
9、Kunststoffe Bestimmung derViskositt mit einem Kugelfall-viskosimeter Teil 1: Verfahren nachHppler (ISO 12058-1 : 1997)This European Standard was approved by CEN on 2002-08-19.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this Europ
10、ean Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, Frenc
11、h, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark
12、, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom. EN ISO 12058-1September 2002Page 2EN ISO 12058-1 : 2002ForewordInternational StandardISO 12058-1 : 1997 Plastics Determination of vis
13、cosity using a falling-ball viscometer Part 1: Inclined-tubemethod,which was prepared by ISO/TC 61 Plastics of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 249 Plastics, the Secretariat of which is held by IBN, as a EuropeanStandard.This European
14、Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by March 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follo
15、w-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text o
16、f the International Standard ISO 12058-1 : 1997 was approved by CEN as a European Standardwithout any modification.NOTE: Normative references to international publications are listed in Annex ZA (normative).Page 3EN ISO 12058-1 : 2002Page 4EN ISO 12058-1 : 2002Page 5EN ISO 12058-1 : 2002Page 6EN ISO 12058-1 : 2002Page 7EN ISO 12058-1 : 2002
