1、August 2012Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS
2、25.160.20!$w7“1908420www.din.deDDIN EN ISO 24598Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-fluxcombinations for submerged arc welding of creep-resisting steels Classification (ISO 24598:2012);English version EN ISO 24598:2012,English translation of DIN EN ISO 2
3、4598:2012-08Schweizustze Drahtelektroden, Flldrahtelektroden und Draht-Pulver-Kombinationen fr dasUnterpulverschweien von warmfesten Sthlen Einteilung (ISO 24598:2012);Englische Fassung EN ISO 24598:2012,Englische bersetzung von DIN EN ISO 24598:2012-08Produits consommables pour le soudage Fils-lect
4、rodes pleins, fils-lectrodes fourrs et couples lectrodes-flux pour le soudage larc sous flux des aciers rsistant au fluage Classification (ISO 24598:2012);Version anglaise EN ISO 24598:2012,Traduction anglaise de DIN EN ISO 24598:2012-08SupersedesDIN EN ISO 24598:2008-03www.beuth.deIn case of doubt,
5、 the German-language original shall be considered authoritative.Document comprises 25 pages07.12 DIN EN ISO 24598:2012-08 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes” (Secretariat: AFNOR, Fr
6、ance) in collaboration with Technical Committee CEN/TC 121 “Welding” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Schweien und verwandte Verfahren (Welding and Allied Processes Standards Committee), Working Committee NA 092-00-03 AA Sch
7、weizustze (DVS AG W 5). This International Standard is a “cohabitation standard” in which two different approaches to the same subject are specified, designated as “system A” and “system B”. System A classification mainly reflects the European approach, while classification according to system B is
8、mainly based on standards used around the Pacific Rim. It should be noted that, when using this standard, the classification system (A or B) according to which welding consumables are to be manufactured or supplied must be laid down in advance. Requests for official interpretations of any aspect of
9、this International Standard should be addressed to the users national standards organization, which will pass them on to the secretariat of ISO/TC 44/SC 3. A full list of national standards organizations is available from www.iso.org. The DIN Standards corresponding to the International Standards re
10、ferred to in this document are as follows: ISO 544 DIN EN ISO 544 ISO 6847 DIN EN ISO 6847 ISO 13916 DIN EN ISO 13916 ISO 14174 DIN EN ISO 14174 ISO 14344 DIN EN ISO 14344 ISO 15792-1 DIN EN ISO 15792-1 Amendments This standard differs from DIN EN ISO 24598:2008-03 as follows: a) in Table 3 (former
11、Table 4) and Table 4 (former Table 5), B side, the composition of 9C1MV has been modified; b) in Clauses 5A and 5B, sides A and B, different test pieces have been specified in accordance with ISO 15792-1. Previous editions DIN EN ISO 24598: 2008-03 DIN EN ISO 24598:2012-08 3 National Annex NA (infor
12、mative) Bibliography DIN EN ISO 544, Welding consumables Technical delivery conditions for welding filler metals Type of product, dimensions, tolerances and marking DIN EN ISO 6847, Welding consumables Deposition of a weld metal pad for chemical analysis DIN EN ISO 13916, Welding Guidance on the mea
13、surement of preheating temperature, interpass temperature and preheat maintenance temperature DIN EN ISO 14174, Welding consumables Fluxes for submerged arc welding and electroslag welding Classification DIN EN ISO 14344, Welding consumables Procurement of filler materials and fluxes DIN EN ISO 1579
14、2-1, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys DIN EN ISO 24598:2012-08 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 24598 May 2012 ICS 25.160.20 Supersedes EN ISO 24598:20
15、07English Version Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification Produits consommables pour le soudage - Fils-lectrodes pleins, fils-lectrodes fourrs et couples lectrodes-flux
16、pour le soudage larc sous flux des aciers rsistant au fluage - Classification (ISO 24598:2012) Schweizustze - Drahtelektroden, Flldrahtelektroden und Draht-Pulver-Kombinationen fr das Unterpulverschweien von warmfesten Sthlen - Einteilung (ISO 24598:2012) This European Standard was approved by CEN o
17、n 13 April 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
18、 be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t
19、o the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux
20、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members
21、. Ref. No. EN ISO 24598:2012: E(ISO 24598:2012) EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references 5 3 Classification 6 4 Symbols and requirements . 6 4.1 General 6 4.2 Sy
22、mbol for the product/process . 7 4.3 Symbols for the tensile properties of the all-weld metal deposit . 7 4.4 Symbols for impact properties of all-weld metal deposits 7 4.5 Symbol for type of welding flux 9 4.6 Symbol for the chemical composition of solid wire electrodes and of all-weld metal deposi
23、ts . 9 5 Mechanical tests. 13 5.1 Preheating, interpass and post-weld heat treatment temperatures . 13 5.2 Welding conditions and pass sequence 16 6 Chemical analysis 16 7 Rounding procedure 18 8 Retests 18 9 Technical delivery conditions . 19 10 Examples of designation . 19 Bibliography 21 2DIN EN
24、ISO 24598:2012-08 EN ISO 24598:2012 (E) Foreword This document (EN ISO 24598:2012) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be
25、 given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this docume
26、nt may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 24598:2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are b
27、ound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain
28、, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 24598:2012 has been approved by CEN as a EN ISO 24598:2012 without any modification. 3DIN EN ISO 24598:2012-08 EN ISO 24598:2012 (E) Introduction This International Standard recognizes that there are two somewha
29、t different approaches in the global market to classifying a given wire electrode, tubular cored electrode or electrode/flux combination, and allows for either or both to be used to suit a particular market need. Application of either type of classification designation (or of both where suitable) id
30、entifies a product as classified in accordance with this International Standard. The classification in accordance with system A is mainly based on EN 12070:19992. The classification in accordance with system B is mainly based upon standards used around the Pacific Rim. This International Standard pr
31、ovides a classification system for solid wire electrodes in terms of their chemical composition, solid wire electrodes and tubular cored electrodes in terms of the deposit composition obtained with a particular submerged arc flux and, where required, electrode-flux combinations in terms of the yield
32、 strength, tensile strength and elongation of the all-weld metal deposit. The ratio of yield to tensile strength of weld metal is generally higher than that of parent metal. Users should note that matching weld metal yield strength to parent metal yield strength does not necessarily ensure that the
33、weld metal tensile strength matches that of the parent material. Where the application requires matching tensile strength, therefore, selection of the consumable should be made by reference to column 3 of Table 1A or Table 1B, as appropriate. Although combinations of wire electrodes and fluxes suppl
34、ied by individual companies can have the same classification, the individual wire electrodes and fluxes from different companies are not interchangeable unless verified in accordance with this International Standard. It should be noted that the mechanical properties of all-weld metal test pieces use
35、d to classify the wire electrodes vary from those obtained in production joints because of differences in welding procedure, such as electrode size, welding position and material composition. 4DIN EN ISO 24598:2012-08 EN ISO 24598:2012 (E) 1 Scope This International Standard specifies requirements f
36、or classification of solid wire electrodes, tubular cored electrodes and electrode/flux combinations (all-weld metal deposits) for submerged arc welding of creep resisting and low-alloy elevated-temperature steels. One electrode can be tested and classified with different fluxes. The solid wire elec
37、trode is also classified separately based on its chemical composition. This International Standard is a combined specification providing for classification utilizing a system based upon the chemical composition of the solid wire electrode and all-weld metal deposit, or utilizing a system based upon
38、the tensile strength of the all-weld metal deposit and the chemical composition of the solid wire electrode and all-weld metal deposit obtained with the electrode/flux combination. a) Clauses, subclauses and tables which carry the suffix letter “A” are applicable only to solid wire electrodes, tubul
39、ar cored electrodes and all-weld metal deposits classified in accordance with the system based upon chemical composition. b) Clauses, subclauses and tables which carry the suffix letter “B” are applicable only to solid wire electrodes, tubular cored electrodes and all-weld metal deposits classified
40、in accordance with the system based upon the tensile strength of all-weld metal deposits and the chemical composition of solid wire electrodes and all-weld metal deposits. c) Clauses, subclauses and tables which do not have either the suffix letter “A” or the suffix letter “B” are applicable to all
41、solid wire electrodes, tubular cored electrodes and electrode/flux combinations classified under this International Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For un
42、dated references, the latest edition of the referenced document (including any amendments) applies. ISO 544, Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings ISO 6847, Welding consumables Deposition of a weld metal
43、 pad for chemical analysis ISO 13916, Welding Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature ISO 14174, Welding consumables Fluxes for submerged arc welding and electroslag welding Classification ISO 14344, Welding consumables Procure
44、ment of filler materials and fluxes 5DIN EN ISO 24598:2012-08 EN ISO 24598:2012 (E) ISO 15792-1, Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys ISO 80000-1:2009, Quantities and units Part 1: General 3 Classification Classifi
45、cation designations are based upon two approaches to indicate the chemical composition of the solid wire electrode, the chemical composition of the all-weld metal deposit obtained with a solid wire electrode or tubular cored electrode, and the tensile properties and impact properties of the all-weld
46、 metal deposits obtained with a given electrode/flux combination. The two designation approaches include additional designators for some other classification requirements, but not all, as is clear from the provisions given in this International Standard. In many cases, a given commercial product can
47、 be classified in accordance with both systems. Then either or both classification designations can be used for the product. A solid wire electrode shall be classified in accordance with its chemical composition as given in Table 3. An all-weld metal deposit from a solid wire electrode or tubular co
48、red electrode shall be classified in accordance with the all-weld metal deposit composition, as given in Table 4, obtained with a particular flux. When the solid wire electrode or tubular cored electrode is classified in combination with a flux for submerged arc welding, the classification shall be prefixed with a symbol in accordance with Clause 4 as appropriate. 3A Classification by chemical composition 3B Classification by tensile strength and chemical composition The classifica
