1、 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to: STDZNMGTdla.mil or Defense Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616. Since contact information can change, you
2、may want to verify the currency of this address information using the ASSIST database at https:/assist.daps.dla.mil/. FSC 6810 METRIC A-A-55828A 7 January 2011 SUPERSEDING A-A-55828 6 February 1997 COMMERCIAL ITEM DESCRIPTION SULFURIC ACID, TECHNICAL The General Services Administration has authorize
3、d the use of this commercial item description for all federal agencies. 1. SCOPE. This commercial item description (CID) covers two classes and two types of sulfuric acid, Chemical Abstracts Service (CAS) Registry Number 7664-93-9, for use in galvanizing and plating ferrous metals and for general pu
4、rpose. Technical grade sulfuric acid is not intended for use as a reagent grade chemical, a food grade chemical, or an electrolyte. 2. CLASSIFICATION. Sulfuric acid, technical, shall be of the following types and classes, as specified (see 7.3(b): 2.1 Type I. Diluted minimum 93.0 percent sulfuric ac
5、id; minimum specific gravity 1.8347 at 15.5 C/15.5 C (60 F/60 F) or 66.0 degree aum (heavy) at 15.5 C (60 F). Class 1 - For galvanizing and plating Class 2 - For general use 2.2 Type II. Diluted minimum 77.5 percent sulfuric acid; minimum specific gravity 1.7040 at 15.5 C/15.5 C (60 F/60 F) or 60.0
6、degree Baum (heavy) at 15.5 C (60 F). Class 1 - For galvanizing and plating Class 2 - For general use 3. SALIENT CHARACTERISTICS 3.1 Appearance. When inspected visually, the sulfuric acid shall appear to be an oily, clear to slightly cloudy liquid. Provided by IHSNot for ResaleNo reproduction or net
7、working permitted without license from IHS-,-,-A-A-55828A 2 3.2 Chemical and physical characteristics. Sulfuric acid shall conform to the chemical and physical characteristics of table I when tested in accordance with ASTM E223, “Standard Test Methods for Analysis of Sulfuric Acid“. TABLE I. Chemica
8、l and physical characteristics. Type I Type II Characteristics Class 1 Class 2 Class 1 Class 2 Sulfuric acid, percent by weight, minimum 93.0 93.0 77.5 77.5 Specific gravity at 15.5 C/15.5 C (60 F/60 F) 1.8347 1.8347 1.7040 1.7040 Non-volatile matter, percent by weight, maximum 0.025 0.025 0.05 0.05
9、 Arsenic, parts per million (ppm), maximum 3.0 - 3.0 - 4. REGULATORY REQUIREMENTS 4.1 Labeling, packaging, and marking. Items shall be labeled, packed, and marked in accordance with 49 Code of Federal Regulations (CFR), Parts 100 to 199. 4.2 Recovered materials. The contractor is encouraged to use r
10、ecovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.3 Material safety data sheet (MSDS). A MSDS shall be furnished in accordance with FED-STD-313, “Material Safety Data, Transportation Data and Disposal Data for Haz
11、ardous Materials Furnished to Government Activities“, and 29 CFR 1910.1200, “Hazard Communication“. 4.4 Hazard warning label. An Occupational Safety and Health Administration hazard warning label shall be furnished in accordance with 29 CFR 1910.1200. 5. PRODUCT CONFORMANCE PROVISIONS 5.1 Product co
12、nformance. The products provided shall meet the salient characteristics of this CID, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The government reserves the right to require
13、 proof of such conformance. 5.2 Market acceptability. The products offered must have been previously sold either to the government or on the commercial market. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55828A 3 6. PACKAGING 6.1 Preservation
14、 packing, labeling, and marking. Preservation, packing, labeling, and marking shall be as specified in the acquisition order (see 7.3(d). 7. NOTES 7.1 Part or identification number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor
15、 AA55828 - X X Class: A - 1 - For galvanizing and plating B - 2 - For general use Type: 1 - I - Diluted minimum 93.0 percent sulfuric acid; minimum specific gravity 1.8347 at 15.5 C/15.5 C (60 F/60 F) or 66.0 degree Baum (heavy) at 15.5 C (60 F) 2 - II - Diluted minimum 77.5 percent sulfuric acid;
16、minimum specific gravity 1.7040 at 15.5 C/15.5 C (60 F/60 F) or 60.0 degree Baum (heavy) at 15.5 C (60 F) CID NumberExample of reference part number: AA55828-1A 7.2 Source of documents. 7.2.1 CFR and FAR. Copies of CFR and FAR may be obtained from the Superintendent of Documents, P.O. Box 371954, Pi
17、ttsburgh, PA 15250-7954. Electronic copies of CFR documents may be obtained from http:/www.gpoaccess.gov/ecfr/. Electronic copies of FAR documents may be obtained from https:/www.acquisition.gov/far/. 7.2.2 Federal standards. Copies of federal standards may be obtained from General Services Administ
18、ration, Federal Supply Service, Specification Section, 470 East LEnfant Plaza SW, Suite 8100, Washington, DC 20407. Electronic copies may be obtained from https:/assist.daps.dla.mil/. 7.2.3 ASTM standards. Copies of ASTM standards may be obtained from ASTM International, 100 Barr Harbor Drive, P.O.
19、Box C700, West Conshohocken, PA 19428-2959. Electronic copies may be obtained from http:/www.astm.org/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55828A 4 7.2.4 CAS registry numbers. Copies of CAS registry numbers may be obtained from the C
20、hemical Abstracts Service, P.O. Box 3012, Columbus, OH 43210. Electronic copies may be obtained from http:/www.cas.org/. 7.3 Ordering data. The acquisition order should specify the following: a. CID document number, revision, and CID PIN. b. Type and class (see 2). c. Unit quantity required. d. Pack
21、aging requirements (see 6.1). 7.4 Subject term (key word) listing. Arsenic Baum Chemical Galvanizing Plating MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY:Custodians: GSA - FAS Army - EA Air Force - 68 DLA - GS Review Activities: Army - MD1, MI Preparing Activity: DLA - GS3 (Project 6810-20
22、10-019) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
