1、 AMSC N/A FSC 8465 A-A-59907 23 August, 2012 COMMERCIAL ITEM DESCRIPTION SNOW AND ICE MOBILITY KIT (SIMK) SINGLE PACKS The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the
2、requirements kits that augment the Snow and Ice Mobility Kit (SIMK) beyond the forty three personnel it supports. It will provide one user with the equipment necessary to move over ice and snow and perform the same tasks as Soldiers who are issued the SIMK, (A-A-59872). 2. CLASSIFICATION. The Snow a
3、nd Ice Mobility Kit (SIMK) - Single Packs will be furnished as two kits. 2.1 Types: Type I Mobility Single Pack Type II Avalanche Single Pack 3. SALIENT CHARACTERISTICS. The kit shall be composed of the following items in the following quantities as listed in Table I: TABLE I. List of items in Type
4、I Mobility Single Pack Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information usi
5、ng Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil/. Item Name Type Class Color Quantity Axe, Ice I 3 N/A 1 Crampon w/center bar extender I - Black 1 Snowshoe, Assault, Military - - Grey 1 Visual Users Guide, SIM Kit - - color 1 METRI
6、C Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59907 2 TABLE II. List of items in Type II Avalanche Single Pack 3.1 Dimensions. Individual item dimensions shall be in accordance with drawings and specification requirements specified in the app
7、licable CID document (see Table II) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors shall be in accordance with applicable specifications (see Tables I and II). 3.3 End item testing. Individual item tes
8、t standards shall be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials shall be in accordance with applicable specifications (see Tables I and II). 3.5 Workmanship. The SIMK Single Packs shall c
9、onform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The SIMK Single Packs sha
10、ll have no unexpected material or component failures during a continuous one-year cycle. The SIMK Single Packs shall have no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instru
11、ction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Snow And Ice Mobility Kit, Single Pack shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be
12、 included in the printing for the identification label: SNOW AND ICE MOBILITY KIT (SIMK) SINGLE PACK NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the produc
13、t c. The use of the product d. How to choose other components for use in the system e. How to maintain and service the product Item Name Color Quantity Shovel, Avalanche with Probe Silver 1 Transceiver, Avalanche N/A 1 Visual Users Guide, SIM Kit color 1 Provided by IHSNot for ResaleNo reproduction
14、or networking permitted without license from IHS-,-,-A-A-59907 3 f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY
15、 REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally
16、 preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided sha
17、ll meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of su
18、ch conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table III: TABLE III. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance criteria shall be as
19、 specified in the contract or purchase order (see 7.2). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government document
20、s are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59907 4 7.1.2 Federal Acq
21、uisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b. When required,
22、 labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs associated for Type I, to determine the required items for the replacement kit that corresponds to A-A-59872, Snow and Ice
23、Mobility Kit, listed below: NSNs ITEM 8465-01-578-7741 Axe, Ice 8465-01-578-8908 Crampon 8465-01-558-9958 Snowshoe, Assault, Military 4240-01-582-8261 Shovel, Avalanche 4240-01-582-8278 Probe, Avalanche 8465-01-572-3962 Transceiver, Avalanche 7.4 Key words. Mountaineering Avalanche MILITARY INTEREST
24、S: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy -MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-018 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
