1、INCH-POUND MIL-DTL-13791/20 15 January 2009 DETAIL SPECIFICATION SHEET IGNITION DISTRIBUTOR COIL, INTERNAL BALLAST This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp
2、ecification sheet and MIL-DTL-13791. FUGURE 1. Ignition distributor coil internal ballast. AMSC N/A FSC 2920 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-13791/20 2Inches mm Inches mm .015 0.38 2.05 52.1.16 4.06 2.237 56.82.75 19.1 3.75 95
3、.31.750 44.45 3.83 97.3NOTES: 1. Dimensions are in inches. 2. Metric equivalents are for information only. FUGURE 1. Ignition distributor coil internal ballast - Continued. Dimensions and configurations: See figure 1. Referenced documents. In addition to MIL-DTL-13791, this document references the f
4、ollowing: MIL-STD-130 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - SH DLA - CC (Project 2920-2008-020) Review activities: Army - CR, CR4 Navy - MC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
