1、AMSC N/A FSC 5940 INCH-POUND MIL-DTL-24558/15B 3 October 2011 SUPERSEDING MIL-DTL-24558/15A w/AMENDMENT 1 17 February 2006 DETAIL SPECIFICATION SHEET TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 200-TERMINAL, 800-WIRE, 600 VOLTS, SYMBOL NO. 452 This specification is approved for use by all Depar
2、tments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-24558, “Terminal Boxes, Connection, for Electrical and Electronic Systems, General Specification for“. REQUIREMENTS: The terminal box sh
3、all be as specified herein and in accordance with table I and figures 1 through 3. 1. Electrical rating. The terminal box shall have an electrical rating of 600 volts root mean square, and 600 volts direct current. The maximum current shall not exceed 40 amperes per stud of terminal board. 2. Dimens
4、ions and configuration. For dimensions and configuration see figures 1 through 3. All dimensions in figures 1 through 3 are expressed in decimal inches. Overall terminal box dimensions are approximate. Exact dimensions are shown in MIL-E-24142/7, “Enclosures, Submersible (15-Foot), Sizes 20 by 24“.
5、3. Tolerance. All tolerances not specified herein shall be in accordance with MIL-DTL-24558. 4. Standard parts. The standard parts shown in table I shall be used in the construction of the connection box specified herein. The numbers in circles shown on figures 1 and 2 are the same as those shown in
6、 the “Item“ column of table I. 5. Enclosure. The enclosure shall be a 15-foot submersible type. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/15B 2 6. Weight. The weight of the connection box shall not exceed 90.0 pounds. 7. Maximum n
7、umber of wires. The maximum number of wires (including spares) shall not exceed four times the number of terminals. The maximum number of wires to be connected to a single terminal shall not exceed four. QUALITY ASSURANCE: First article inspection and quality conformance inspection shall be as speci
8、fied in MIL-DTL-24558. NOTES: 1. Drawing. The terminal box specified by this specification sheet was formerly covered on NAVSHIPS drawing no. 9000-S6202-74376. 2. Part or identifying number (PIN). The PIN to be used for terminal boxes acquired to this specification is created as follows: M 24558/15
9、 452 Symbol number Specification sheet number General specification number Denotes military specification TABLE I. Parts list. Item Description Qty Part number or specification Remarks 1 Enclosure assembly, brass 1 MIL-E-24142/7 M24142/7-001 2 Identification plate 1 MIL-DTL-24558 Figure 6 3 Informa
10、tion plate 1 MIL-DTL-24558 Figure 6 4 Mounting bracket 10 MIL-DTL-24558 Figure 1 5 Terminal board assembly 10 A-A-59125/10 4TB20 6 RDH machine screw 10-24 X 0.875 20 Commercial Brass 7 Washer, #10 external tooth 20 Commercial Bronze 8 RDH machine screw 6-32 X 0.250 4 Commercial Brass Provided by IHS
11、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/15B 3 FIGURE 1. Connection box assembly. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/15B 4 FIGURE 2. Location of terminal board mountin
12、g brackets. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/15B 5 FIGURE 3. Mounting dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-24558/15B 6 CHANGES FROM PREVIOUS
13、 ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Navy - SH DLA - GS DLA - GS4 (Project 5940-2011-042) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
