1、 AMSC N/A FSC 6145 INCH-POUND MIL-DTL-27072/42C 12 March 2012 SUPERSEDING MIL-DTL-27072/42B8 December 2000 DETAIL SPECIFICATION SHEET CABLE, SPECIAL PURPOSE, ELECTRICAL, MULTICONDUCTOR (4 CONDUCTORS) AND SINGLE SHIELDED, M27072/42JBCA* This specification is approved for use by all Departments and Ag
2、encies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-27072. REQUIREMENTS: TAPE POLYETHYLENETEREPHTHALATESHIELD TINNED COPPERSHEATH POLYVINYL CHLORIDEFILLERWHITEREDBLACKGREENNOTE: The complete Part or Id
3、entifying Number (PIN) requires a color code designator (see table I). FIGURE 1. Cable configuration. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/42C 2 Design and construction: See figure 1 Number of conductors: 4 Temperature rating
4、 105 C Components: Basic wire: M16878/18BGE* (see table I) Conductor: Tinned copper Primary insulation: Polyvinyl chloride Colors: Black White Red Green Jacket over insulation: Polyamide Color: Natural Filler: Material: In accordance with MIL-DTL-27072 Lay: 1.8 inches maximum Cabling: Not applicabl
5、e Binder tape material: Polyethylene terephthalate Shield: Tinned copper Gauge: 36 AWG Braid angle: 20 to 40 degrees Jacket undershield: Not applicable Sheath: Material: Polyvinyl chloride Wall thickness: .025 inch nominal Tensile strength: In accordance with MIL-DTL-27072 Ultimate elongation: In ac
6、cordance with MIL-DTL-27072 Accelerated aging: In accordance with MIL-DTL-27072 Color: See MIL-DTL-27072 Finished cable: See table I Cold bend: Mandrel size in accordance with MIL-DTL-27072 Dielectric withstanding voltage: 3,000 V rms Conductor resistance: In accordance with basic wire specification
7、 TABLE I. Construction data. PIN 27072/42 Basic wire except color M16878/18BGE*1/,2/(reference) Finished cable diameter inch(mm) 10% Wire size (AWG) Number of strands Strand size Nominal diameter inch(mm) JBCA* 20 19 32 .078(1.98) .270(6.02) 1/ Asterisks (*) shall be replaced by the appropriate colo
8、r designator. 2/ Dimensions are in inches. Metric equivalents are given for information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-27072/42C 3 Changes from previous issue: Marginal notations are not used in this revision to identif
9、y changes with respect to the previous issues due to the extensiveness of the changes. Referenced document. This document references MIL-DTL-27072. CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 6145-2012-023) DLA CC NOTE: The activities list
10、ed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of this information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
