1、AMSC N/A FSC 5935 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, WALL MOUNTING ASSEMBLY, STRAIGHT, CLASSES DJ, DJS, PJ, TJ, TJS, ZJ, AND ZJS This specification is approved for use by all Departments and Agencies
2、 of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-28840. FIGURE 1. Dimensions and configuration. MIL-DTL-28840/20H 21 November 2013 SUPERSEDING MIL-DTL-28840/20G 11 January 2010 INCH-POUND Provided by IHSN
3、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/20H 2 Shell size designator (see note 3) Assembly Part or Identifying Number (PIN) (see note 6) Connector receptacle (PIN) (see note 6) Backshell assembly (PIN) (see note 6) A Cable entry max min A (11) M
4、28840/20*A*A* M28840/10*A* M28840/601* .312 (7.92) .188 (4.78) A (11) M28840/20*A*B* M28840/10*A* M28840/624* .438 (11.13) .281 (7.14) A (11) M28840/20*A*C* M28840/10*A* M28840/625* .562 (14.27) .344 (8.74) B (13) M28840/20*B*A* M28840/10*B* M28840/602* .312 (7.92) .188 (4.78) B (13) M28840/20*B*B*
5、M28840/10*B* M28840/603* .438 (11.13) .281 (7.14) B (13) M28840/20*B*C* M28840/10*B* M28840/626* .562 (14.27) .344 (8.74) B (13) M28840/20*B*D* M28840/10*B* M28840/627* .625 (15.88) .375 (9.53) C (15) M28840/20*C*A* M28840/10*C* M28840/605* .438 (11.13) .281 (7.14) C (15) M28840/20*C*B* M28840/10*C*
6、 M28840/606* .562 (14.27) .344 (8.74) C (15) M28840/20*C*C* M28840/10*C* M28840/628* .625 (15.88) .375 (9.53) C (15) M28840/20*C*D* M28840/10*C* M28840/607* .750 (19.05) .438 (11.13) C (15) M28840/20*C*E* M28840/10*C* M28840/604* .312 (7.92) .188 (4.78) D (17) M28840/20*D*A* M28840/10*D* M28840/608*
7、 .625 (15.88) .375 (9.53) D (17) M28840/20*D*B* M28840/10*D* M28840/609* .750 (19.05) .438 (11.13) D (17) M28840/20*D*C* M28840/10*D* M28840/610* .938 (23.83) .625 (15.88) E (19) M28840/20*E*A* M28840/10*E* M28840/611* .625 (15.88) .375 (9.53) E (19) M28840/20*E*B* M28840/10*E* M28840/612* .938 (23.
8、83) .625 (15.88) F (23) M28840/20*F*A* M28840/10*F* M28840/613* .750 (19.05) .438 (11.13) F (23) M28840/20*F*B* M28840/10*F* M28840/614* .938 (23.83) .625 (15.88) F (23) M28840/20*F*C* M28840/10*F* M28840/615* 1.188 (30.18) .812 (20.62) FIGURE 1. Dimensions and configuration Continued. Provided by I
9、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/20H 3 Shell size designator (see note 3) Assembly (PIN) (see note 6) Connector receptacle (PIN) (see note 6) Backshell assembly (PIN) (see note 6) B thread class 2B E ref L max A (11) M28840/20*A*A* M2
10、8840/10*A* M28840/601* .750-.1P.2L-D.S. .938 (23.83) 6.625 (168.28) A (11) M28840/20*A*B* M28840/10*A* M28840/624* .750-.1P.2L-D.S. 1.125 (28.58) 6.625 (168.28) A (11) M28840/20*A*C* M28840/10*A* M28840/625* .750-.1P.2L-D.S. 1.312 (33.32) 6.625 (168.28) B (13) M28840/20*B*A* M28840/10*B* M28840/602*
11、 .875-.1P.2L-D.S. .938 (23.83) 6.625 (168.28) B (13) M28840/20*B*B* M28840/10*B* M28840/603* .875-.1P.2L-D.S. 1.125 (28.58) 6.625 (168.28) B (13) M28840/20*B*C* M28840/10*B* M28840/626* .875-.1P.2L-D.S. 1.312 (33.32) 6.625 (168.28) B (13) M28840/20*B*D* M28840/10*B* M28840/627* .875-.1P.2L-D.S. 1.31
12、2 (33.32) 7.125 (180.98) C (15) M28840/20*C*A* M28840/10*C* M28840/605* 1.062-.1P.2L-D.S. 1.125 (28.58) 6.625 (168.28) C (15) M28840/20*C*B* M28840/10*C* M28840/606* 1.062-.1P.2L-D.S. 1.312 (33.32) 6.625 (168.28) C (15) M28840/20*C*C* M28840/10*C* M28840/628* 1.062-.1P.2L-D.S. 1.312 (33.32) 7.125 (1
13、80.98) C (15) M28840/20*C*D* M28840/10*C* M28840/607* 1.062-.1P.2L-D.S. 1.593 (40.46) 7.188 (182.58) C (15) M28840/20*C*E* M28840/10*C* M28840/604* 1.062-.1P.2L-D.S. .938 (23.83) 6.625 (168.28) D (17) M28840/20*D*A* M28840/10*D* M28840/608* 1.125-.1P.2L-D.S. 1.312 (33.32) 7.125 (180.98) D (17) M2884
14、0/20*D*B* M28840/10*D* M28840/609* 1.125-.1P.2L-D.S. 1.593 (40.46) 7.188 (182.58) D (17) M28840/20*D*C* M28840/10*D* M28840/610* 1.125-.1P.2L-D.S. 1.750 (44.45) 7.188 (182.58) E (19) M28840/20*E*A* M28840/10*E* M28840/611* 1.312-.1P.2L-D.S. 1.312 (33.32) 7.125 (180.98) E (19) M28840/20*E*B* M28840/1
15、0*E* M28840/612* 1.312-.1P.2L-D.S. 1.750 (44.45) 7.250 (184.15) F (23) M28840/20*F*A* M28840/10*F* M28840/613* 1.500-.1P.2L-D.S. 1.593 (40.46) 7.688 (195.28) F (23) M28840/20*F*B* M28840/10*F* M28840/614* 1.500-.1P.2L-D.S. 1.750 (44.45) 7.812 (198.42) F (23) M28840/20*F*C* M28840/10*F* M28840/615* 1
16、.500-.1P.2L-D.S. 2.093 (53.16) 7.938 (201.63) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/20H 4 Shell size designator (see note 3) Assembly (PIN) (see note 6) Connector receptacle (P
17、IN) (see note 6) Backshell assembly (PIN) (see note 6) A Cable entry max min F (23) M28840/20*F*B* M28840/10*F* M28840/614* .938 (23.83) .625 (15.88) F (23) M28840/20*F*C* M28840/10*F* M28840/615* 1.188 (30.18) .812 (20.62) G (25) M28840/20*G*A* M28840/10*G* M28840/616* .938 (23.83) .625 (15.88) G (
18、25) M28840/20*G*B* M28840/10*G* M28840/617* 1.188 (30.18) .812 (20.62) G (25) M28840/20*G*C* M28840/10*G* M28840/618* 1.250 (31.75) .875 (22.23) G (25) M28840/20*G*D* M28840/10*G* M28840/619* 1.380 (35.05) 1.000 (25.40) H (29) M28840/20*H*A* M28840/10*H* M28840/620* 1.188 (30.18) .812 (20.62) H (29)
19、 M28840/20*H*B* M28840/10*H* M28840/621* 1.380 (35.05) 1.000 (25.40) J (33) M28840/20*J*A* M28840/10*J* M28840/622* 1.380 (35.05) 1.000 (25.40) J (33) M28840/20*J*B* M28840/10*J* M28840/623* 1.625 (41.28) 1.250 (31.75) Shell size designator (see note 3) Assembly (PIN) (see note 6) Connector receptac
20、le (PIN) (see note 6) Backshell assembly (PIN) (see note 6) B thread class 2B E ref L max F (23) M28840/20*F*B* M28840/10*F* M28840/614* 1.500-.1P.2L-D.S. 1.750 (44.45) 7.812 (198.42) F (23) M28840/20*F*C* M28840/10*F* M28840/615* 1.500-.1P.2L-D.S. 2.093 (53.16) 7.938 (201.63) G (25) M28840/20*G*A*
21、M28840/10*G* M28840/616* 1.625-.1P.2L-D.S. 1.750 (44.45) 7.750 (196.85) G (25) M28840/20*G*B* M28840/10*G* M28840/617* 1.625-.1P.2L-D.S. 2.093 (53.16) 8.438 (214.33) G (25) M28840/20*G*C* M28840/10*G* M28840/618* 1.625-.1P.2L-D.S. 2.093 (53.16) 8.438 (214.33) G (25) M28840/20*G*D* M28840/10*G* M2884
22、0/619* 1.625-.1P.2L-D.S. 2.343 (59.51) 8.500 (215.90) H (29) M28840/20*H*A* M28840/10*H* M28840/620* 1.812-.1P.2L-D.S. 2.093 (53.16) 8.438 (214.33) H (29) M28840/20*H*B* M28840/10*H* M28840/621* 1.812-.1P.2L-D.S. 2.343 (59.51) 8.500 (215.90) J (33) M28840/20*J*A* M28840/10*J* M28840/622* 2.000-.1P.2
23、L-D.S. 2.343 (59.51) 8.500 (215.90) J (33) M28840/20*J*B* M28840/10*J* M28840/623* 2.000-.1P.2L-D.S. 2.750 (69.85) 8.750 (222.25) FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/20H 5 NO
24、TES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Shell sizes are provided within parentheses for information and are not a part of the designator. 4. Dimensions apply after plating. 5. Normal mating key position shown. For alternate key positions see MIL-DTL
25、-28840. 6. Assembly shall be made of a connector and backshell of the same material. FIGURE 1. Dimensions and configuration Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Classes: DJ, DJS, PJ, TJ, TJS, ZJ and ZJS. Insert arrangements: See the figure of MIL-STD-1698 correspondin
26、g to the desired shell size. Contacts: Pin or socket, crimp type, styles P, S, D, E, F or G, in accordance with MIL-DTL-28840. Shell polarization: 1 thru 6, key position. Marking: Part or Identifying Number (PIN) on shell. Mating counterpart: Mating connectors are in accordance with MIL-DTL-28840/16
27、, /17, /18, /19, /26, /28 and /29. Installation and removal tool: In accordance with MIL-I-81969/33 and /34. PINs shown indicate aluminum alloy hardware. If corrosion resistant steel parts are required, the connector and accessory part numbers must be changed to designate corrosion resistant hardwar
28、e. PIN example: M28840/20 C G I A A P 1 Specification sheet number Key position 1, 2, 3, 4, 5, 6 Position Contact designator Backshell style Backshell designator Insert arrangement Shell size RESTRICTIONS: Classes DJ and DJS are inactive for NAVSEA new design, unless approved by NAVSEA. Classes Code
29、 letter DJ C DJS E PJ G TJ M TJS V ZJ U ZJS X Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-28840/20H 6 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previou
30、s issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations an
31、d relationship to the last previous issue. Referenced documents. In addition to MIL-DTL-28840, this document references the following: MIL-DTL-28840/6 MIL-DTL-28840/10 MIL-DTL-28840/16 MIL-DTL-28840/17 MIL-DTL-28840/18 MIL-DTL-28840/19 MIL-DTL-28840/26 MIL-DTL-28840/28 MIL-DTL-28840/29 MIL-I-81969/3
32、3 MIL-I-81969/34 MIL-STD-1698 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - EC Air Force - 85 DLA - CC (Project 5935-2013-118) Review activities: Army AV, MI Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
