1、AMSC N/A FSC 6210 INCH-POUND MIL-DTL-3661/47B 5 January 2009 SUPERSEDING MIL-L-3661/47A 2 November 1992 DETAIL SPECIFICATION SHEET LAMPHOLDERS, HOUSINGS, INDICATOR-LIGHT, WATERTIGHT STYLE LH89 This specification is approved for use by all Departments and Agencies of the Department of Defense. The re
2、quirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-3661. FIGURE1. Design and Construction Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3661/47B 2 NOTES: 1. All dimensions are in inch
3、es. Unless otherwise specified tolerances are .031 inches 2. Metric equivalences (to the nearest 0.01 mm) are given for general information only and are base on 1 inches = 25.4mm. 3. Housing and terminal design optional provided the dimensions fall within the configuration shown. 4. Material for the
4、 Mouthing Bushing shall be Aluminum. REQUIREMENTS: 1. Design and construction. See figure one. 2. Sealing : Watertight. TABLE I. Conformance Inspection. Type Designation Mating Lens Lamp Accommodation LH89 / 1 LC 35, LC 36 and LC 37 Midget flange base T-1-3/4 incandescent lamp CHANGES FROM PREVIOUS
5、ISSUE. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - CR Navy - AS Air Force -99 DLA GS-2 (Project 6210-2009-003) Review Activities: Air Force - 71 NOTE: The activities l
6、isted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at http:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
