1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Redraw. Add device type 02 and RHA information. - drw 12-03-15 Charles F. Saffle REV SHEET REV A A A A A SHEET 15 16 17 18 19 REV STATUS REV A A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Dan Won
2、nell DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Rajesh Pithadia APPROVED BY Robert M. Heber MICROCIRCUIT, DIGITAL-LINEAR, 12-
3、BIT, 500 MSPS, ANALOG-TO-DIGITAL CONVERTER, MONOLITHIC SILICON DRAWING APPROVAL DATE 07-10-26 AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-07208 SHEET 1 OF 19 DSCC FORM 2233 APR 97 5962-E114-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
4、-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application
5、(device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 07208 01
6、 V X C Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels
7、 and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types. The device types identify the circuit function
8、 as follows: Device type Generic number Circuit function 01 ADS5463-SP A/D converter, 12-bit, 500 MSPS 02 ADS5463-SP A/D converter, 12-bit, 500 MSPS 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device r
9、equirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline. The case outline is as designated in MIL-S
10、TD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X See figure 1 84 Quad flatpack with non-conductive tie bar 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided b
11、y IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage: AVDD5to GND 6 V DVDD
12、3to GND 5 V AVDD3to GND 5 V Analog input to GND -0.3 V to AVDD5+ 0.3 V Clock input to GND -0.3 V to AVDD5+ 0.3 V CLK to CLK 2.5 V Digital data output to GND . -0.3 V to DVDD3+ 0.3 V Maximum junction temperature (TJ) +150C Storage temperature range (TSTG) . -65C to 150C Thermal resistance, junction-t
13、o-ambient (JA) . 21.81C/W 2/ Thermal resistance, junction-to-case (JC) 0.849C/W 3/ 1.4 Recommended operating conditions. Supplies: Analog supply voltage (AVDD5) . 4.75 V to 5.25 V Analog supply voltage (AVDD3) . 3 V to 3.6 V Output driver supply voltage (DVDD3) . 3 V to 3.6 V Analog input: Different
14、ial input range 2.2 VPPInput common mode voltage (VCM) . 2.4 V Clock input: ADCLK input sample rate (sine wave) (1/tC) . 500 MSPS Clock amplitude, sine wave, differential . 3 VPPClock duty cycle . 50 % Operating case temperature range (TC) -55C to +125C Estimated device life at elevated temperatures
15、 electromigration fail modes: _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Heat slug connected to PCB thermal plane. Airflow is at 0 LFM (no airflow). 3/ Specified
16、 with the thermal bond pad on the backside of the package soldered to a 2 ounce CU plate PCB thermal plane. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-399
17、0 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 1.5 Radiation features. Maximum total dose available (dose rate = 50 300 rads(Si)/s) Device type 02: . 100 krads(Si) 1/ Maximum total dose available (dose rate 10 mrads(Si)/s): Device type 02 . 100 krads(Si) 2/ The manufacturer supplying RHA device ty
18、pe 02 on this drawing has performed characterization test to demonstrate that the parts do not exhibit enhanced low dose rate sensitivity (ELDRS) to 100 krads(Si) in accordance with MIL-STD-883, method 1019, paragraph 3.13.1.1. Therefore these parts may be considered ELDRS free to 100 krads(Si). The
19、 manufacturer will perform high dose rate lot acceptance testing on a wafer by wafer basis in accordance with MIL-STD-883, method 1019, conditions A for device type 02. 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handboo
20、ks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF D
21、EFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents ar
22、e available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
23、 of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. _ 1/ The manufacturer supplying device type 02 has performed characterization testing in accordance with MIL-STD-883 method 1019, condition
24、A at 100 krads(Si) only. The radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883, method 1019, condition A to a maximum total dose of 100 krads(Si). 2/ The manufacturer supplying device type 02 has performed characterization testing
25、in accordance with MIL-STD-883 method 1019, and the parts do not exhibit enhanced low dose rate sensitivity (ELDRS) to 100 krads(Si). The radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883, method 1019, condition D to a maximum tota
26、l dose of 100 krads(Si). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requireme
27、nts. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. Th
28、e individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-385
29、35 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein and figure 1. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2. 3.2.4 Block diagram
30、. The block diagram shall be as specified on figure 3. 3.2.4 Timing waveforms. The timing waveforms shall be as specified on figure 4. 3.2.5 Radiation exposure circuit. The radiation exposure circuit shall be maintained by the manufacturer under document revision level control and shall be made avai
31、lable to the preparing and acquiring activity upon request. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply
32、over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In
33、addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked.
34、 Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535
35、. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see
36、6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of
37、 supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as requir
38、ed for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of prod
39、uct (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the ma
40、nufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 57 (see MIL-PR
41、F-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance chara
42、cteristics. Test Symbol Conditions 1/, 2/, 3/ -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Internal reference voltages section Reference voltage VREF1, 2, 3 All 2.38 2.42 V Dynamic accuracy section Differential linearity error DNL fIN= 210 MHz 1, 2, 3 Al
43、l -0.98 1.2 LSB Integral linearity error INL fIN= 210 MHz 1, 2, 3 01 -2.9 2.9 LSB 02 -3.5 3.5 Offset error 1, 2, 3 All -0.5 0.5 %FS Gain error 1, 2, 3 All -5 5 %FS Power supply section Analog supply current IAVDD5FS= 500 MSPS, VIN= full scale, fIN= 300 MHz 1, 2, 3 01 335 mA 02 345 IAVDD301 140 02 14
44、8 Output buffer supply current IDVDD3FS= 500 MSPS, VIN= full scale, fIN= 300 MHz 1, 2, 3 All 88 mA Power dissipation PDFS= 500 MSPS, VIN= full scale, fIN= 300 MHz 1, 2, 3 01 2.425 W 02 2.450 Dynamic AC characteristics section Signal-to-noise ratio SNR fIN= 100 MHz 4 01 64.1 dBFS 5 62.7 6 63.5 4, 5,
45、6 02 60.5 fIN= 210 MHz 4 01 63.6 5 62.4 6 63.2 4, 5, 6 02 60.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEV
46、EL A SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics continued. Test Symbol Conditions 1/, 2/, 3/ -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Dynamic AC characteristics section - continued. Signal-to-noise ratio SNR fIN= 30
47、0 MHz 4 01 62.7 dBFS 5 61.3 6 61.9 4, 5, 6 02 58.0 Spurious free dynamic range SFDR fIN= 100 MHz 4 01 57.9 dBc 5 58.8 6 58.6 4, 5, 6 02 57.9 fIN= 210 MHz 4 01 55.2 5 56.6 6 56.9 4, 5, 6 02 55.2 fIN= 300 MHz 4 01 54.1 5 51.3 6 56.2 4, 5, 6 02 51.2 Second harmonic HD2 fIN= 100 MHz 4 01 57.9 dBc 5 58.8
48、 6 58.6 4, 5, 6 02 57.9 fIN= 210 MHz 4 01 55.2 5 56.6 6 56.9 4, 5, 6 02 55.2 fIN= 300 MHz 4 01 54.1 5 51.3 6 56.2 4, 5, 6 02 51.2 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-07208 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics continued. Test Symbol Condi
