1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R097-95. 95-03-20 Michael A. Frye B Incorporate revision A NOR. Update drawing to current requirements. Editorial changes throughout. drw 06-04-03 Raymond Monnin REV SHET REV SHET REV STATUS REV B B B B B B B B
2、 B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 PMIC N/A PREPARED BY Sandra Rooney DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY Sandra Rooney COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Michael A. Frye MICROCI
3、RCUIT, LINEAR, 1-, 2-, 6-, AND 8-CHANNEL, 12-BIT SERIAL I/O DATA AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 94-07-19 ACQUISITION SYSTEMS, MONOLITHIC SILICON AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-93057 SHEET 1 OF 10 DSCC FORM 2233 APR 97 5962-E353-06 Provided by I
4、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assuranc
5、e class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels ar
6、e reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 93057 01 M E A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA desig
7、nator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) in
8、dicates a non-RHA device. 1.2.2 Device types. The device types identify the circuit function as follows: Device type Generic number Circuit function Full scale error 01 LTC1291B 2-channel 12-bit serial I/O data acquisition system 1.0 LSB 02 LTC1292B 1-channel 12-bit serial I/O data acquisition syste
9、m 0.5 LSB 03 LTC1293B 6-channel 12-bit serial I/O data acquisition system 0.5 LSB 04 LTC1294B 8-channel 12-bit serial I/O data acquisition system 0.5 LSB 05 LTC1291C 2-channel 12-bit serial I/O data acquisition system 2.0 LSB 06 LTC1292C 1-channel 12-bit serial I/O data acquisition system 1.0 LSB 07
10、 LTC1293C 6-channel 12-bit serial I/O data acquisition system 1.0 LSB 08 LTC1294C 8-channel 12-bit serial I/O data acquisition system 1.0 LSB 09 LTC1291D 2-channel 12-bit serial I/O data acquisition system 4.0 LSB 10 LTC1292D 1-channel 12-bit serial I/O data acquisition system 4.0 LSB 11 LTC1293D 6-
11、channel 12-bit serial I/O data acquisition system 4.0 LSB 12 LTC1294D 8-channel 12-bit serial I/O data acquisition system 4.0 LSB 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documen
12、tation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 as follo
13、ws: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2 T16 16 Dual-in-line P GDIP1-T8 or CDIP2 T8 8 Dual-in-line R GDIP1-T20 or CDIP2 T20 20 Dual-in-line 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, a
14、ppendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum
15、 ratings. 1/, 2/ Supply voltage (VCC) to GND or V-. +12 V dc Negative supply voltage (V-) -6 V dc to GND Analog reference input voltage: Device types 01, 02, 05, 06, 09, and 10 . -0.3 V dc to VCC+ 0.3 V dc Device types 03, 04, 07, 08, 11, and 12 . (V-) - 0.3 V dc to VCC+ 0.3 V dc Digital input volta
16、ge -0.3 V dc to +12 V dc Digital output voltage -0.3 V dc to VCC+ 0.3 V dc Power dissipation (PD) . 500 mW Storage temperature range -65C to +150C Lead temperature (soldering, 10 seconds). +300C Junction temperature (TJ). +175C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Thermal res
17、istance, junction-to-ambient (JA) +65C 1.4 Recommended operating conditions. Ambient operating temperature range -55C to +125C Supply voltage range (VCC) +4.5 V dc to 10 V dc Negative supply voltage range (V-): Device types 03, 04, 07, 08, 11, and 12 . -5.5 V dc to 0V dc Clock frequency at (fCLK) 0.
18、1 MHz to 1.0 MHz Total cycle time (tCYC): Device types 01, 05, and 09 . 18 CLK cycles + 500 ns Device types 02, 06, and 10 . 14 CLK cycles + 2.5 s Device types 03, 04, 07, 08, 11, and 12 . 21 CLK cycles + 500 ns Setup time, CS before CLK. 50 ns Hold time, DINafter SCLK (tHDI) 50 ns Setup time, DIN)
19、stable before SCLK 50 ns CLK high time (tWHCLK) . 300 ns CLK low time (tWLCLK) . 400 ns CS high time between data transfer cycles. 500 ns CS low time during data transfer: Device types 01, 05, and 09 . 18 CLK cycles Device types 02, 06, and 10 . 14 CLK cycles Device types 03, 04, 07, 08, 11, and 12
20、. 21 CLK cycles _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ All voltage values are with respect to ground with DGND, AGND, and REF wired together (unless otherwis
21、e noted). For device type 03, REF is internally connected to AGND pin. For device types 01, 02, 05, 06, 09, and 10, DGND, AGND, REF and V- are internally connected to the GND pin. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT
22、DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the e
23、xtent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Met
24、hod Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps
25、.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this dr
26、awing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as spe
27、cified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JA
28、N class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case ou
29、tlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance c
30、haracteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup a
31、re defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the
32、“5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The
33、 certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STAND
34、ARD MICROCIRCUIT DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits
35、Unit Min MaxOffset error OE 1, 2, 3 All 3.0 LSB Linearity error LE 2/ 1, 2, 3 01, 02, 03, 04, 05, 06, 07, 08 0.5 LSB 09, 10, 11, 12 0.75 Full-scale error FSE 1, 2, 3 02, 03, 04 0.5 LSB 01, 06, 07, 08 1.0 05 2.009, 10, 11, 12 4.0 On channel leakage current IONLOn channel = 5 V, Off channel = 0 V 3/ 1
36、, 2, 3 All +1 A On channel = 0 V, Off channel = 5 V 3/ -1 Off channel leakage current IOFLOn channel = 5 V, Off channel = 0 V 3/ 1, 2, 3 All -1 A On channel = 0 V, Off channel = 5 V 3/ +1 Delay time, CLK to DOUTdata valid tdDO9, 10, 11 All 300 ns Delay time, CS to DOUTto HI-Z tdz9, 10, 11 All 150 ns
37、 Delay time, CLK to DOUTenabled tde9, 10, 11 All 200 ns DOUTfall time tf9, 10, 11 All 130 ns DOUTrise time tr9, 10, 11 All 50 ns High level input voltage VIHVCC= 5.25 V 1, 2, 3 All 2.0 V Low level input voltage VILVCC= 4.74 V 1, 2, 3 All 0.8 V High level input current IIHVIH= VCC1, 2, 3 All 2.5 A Lo
38、w level input current IIHVIL= 0 V 1, 2, 3 All -2.5 A See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVE
39、L B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions 1/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min MaxHigh level output voltage VOHVCC= 4.75 V, IO= 360 A 1, 2, 3 All 2.4 V Low level output vo
40、ltage VOLVCC= 4.75 V, IO= 1.6 mA 1, 2, 3 All 0.4 V HI-Z output leakage IOZVOUT= VCC, CS high 1, 2, 3 All 3 A OUT= 0 V, CS high -3 Positive supply current ICCCS high 1, 2, 3 All 12 mA CS high, power shutdown 01, 03, 04, 05, 07, 08, 09, 11, 12 15 A Reference current IREFVREF= 5 V 1, 2, 3 02, 03, 04, 0
41、6, 07, 08, 10, 11, 12 50 A Negative supply current I- CS high, V- = -5 V 1, 2, 3 03, 04, 07, 08, 11, 12 50 A 1/ VCC= 5 V, VREF+= +5 V, VREF-= 0 V, V- = 0 V for unipolar mode and -5 V for bipolar mode, and CLK = 1.0 MHz, unless otherwise specified. 2/ Linearity error is specified between the actual e
42、nd points of the A/D transfer curve. The duration is measured from the center of the quantization band. 3/ Channel leakage current in measured after the channel selection. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING
43、SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 Device types 01, 05, 09 02, 06, 10 03, 07, 11 04, 08, 12 Case outlines P E R Terminal number Terminal symbol 1 CS CS CH0 CH0 2 CH0 +IN CH1 CH1 3 CH1 -IN CH2 CH2 4 GND GND CH3 CH3
44、 5 DINVREFCH4 CH4 6 DOUTDOUTCH5 CH5 7 CLK CLK COM CH6 8 VCCVCCDGND CH7 9 - - - - - - V- COM 10 - - - - - - AGND DGND 11 - - - - - - VREFV- 12 - - - - - - DINAGND 13 - - - - - - DOUTREF- 14 - - - - - - CS REF+ 15 - - - - - - CLK DIN16 - - - - - - VCCDOUT17 - - - - - - - - - CS 18 - - - - - - - - - CL
45、K 19 - - - - - - - - - AVCC20 - - - - - - - - - DVCCFIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93057 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVE
46、L B SHEET 8 DSCC FORM 2234 APR 97 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance s
47、hall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for d
48、evice classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see
