1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Redraw. Update drawing to current requirements. drw 09-07-16 Charles F. Saffle REV SHET REV SHET REV STATUS REV A A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Rick C. Officer DEFENSE SUPPLY CENTE
2、R COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Charles E. Besore APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, LOAD SHARE CONTROLLER, MONOLITHIC SI
3、LICON DRAWING APPROVAL DATE 93-10-05 AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-93206 SHEET 1 OF 14 DSCC FORM 2233 APR 97 5962-E372-09 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE
4、SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and
5、lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 93206 01 M E A Federal stock class designator RHA design
6、ator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designato
7、r. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type. The device type identifies the circuit function as follows: Device type Generic number Circuit fu
8、nction 01 UC1907 Load share controller 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN c
9、lass level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 as follows: Outline letter Descriptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16
10、16 Dual-in-line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-
11、,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage . +35 V Opto output voltage +35 V Opto output current +20 mA Status indicate sink current +20 mA C
12、/S input voltage +35 V Share bus voltage range -0.3 V to +35 V Maximum forced voltage range (zener clamped) . -0.3 V to +10 V Maximum forced current range (zener clamped) 10 mA Ground amp sink current +50 mA V/A, C/A, B/A, D/A sink current +20 mA Power dissipation (PD) (at TA= +25C) 1,000 mW 2/ Stor
13、age temperature range -65C to +150C Junction temperature (TJ) . +150C Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 1.4 Recommended operating conditions. Supply voltage range . +4.5 V to +35 V Ambient operating temperature range (TA) -5
14、5C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation
15、or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENS
16、E HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia,
17、PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained
18、. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Derate at 10 mW/C for TAabove +50C. Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
19、ense from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL
20、-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535,
21、appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device c
22、lass M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the ele
23、ctrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical test
24、s for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the optio
25、n of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification
26、/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compli
27、ance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.
28、2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-P
29、RF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of cha
30、nge for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the ac
31、quiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing s
32、hall be in microcircuit group number 110 (see MIL-PRF-38535, appendix A).Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5
33、 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA+125C Group A subgroups Device type Limits 1/ Unit VIN= +15 V unless otherwise specified Min Max Voltage amp section Input voltage VINV/A out = 1 V 1 01 1.975 2.025 V 2, 3 1.960 2.040 Line regulatio
34、n VLNVIN= 4.5 V to 35 V 1, 2, 3 01 15 mV Load regulation VLDILreference = 0.0 mA to -10 mA 1, 2, 3 01 10 mV Long term stability 2/ TA= +125C, 1,000 hours 2 01 25 mV Total output variation Line, load temperature 1, 2, 3 01 1.960 2.040 Input adjust range VIAA/A from max high to max low 1, 2, 3 01 85 1
35、15 mV Input bias current IIB1, 2, 3 01 -1 A Open loop gain AVV/A out = 0.75 V to 1.5 V 4, 5, 6 01 65 dB Unity gain bandwidth 2/ UGBW TA= +25C 4 01 700 kHz Output sink current ISK(+)SENSE = 2.2 V, V/A out = 1 V 1, 2, 3 01 6 mA Output source current ISC(+)SENSE = 1.8 V, V/A out = 1 V 1, 2, 3 01 400 A
36、Output voltage high VOH(+)SENSE = 2.2 V, IL= -400 A 1, 2, 3 01 1.85 V Output voltage low VOL(+)SENSE = 1.8 V, IL= +1 A 1, 2, 3 01 0.40 V Reference section Output voltage VOUT1 01 1.970 2.030 V 2, 3 1.955 2.045 Short circuit current IOSVREF1, 2, 3 01 -15 -60 mA See footnotes at end of table. Provided
37、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continue
38、d. Test Symbol Conditions -55C TA+125C Group A subgroups Device type Limits 1/ Unit VIN= +15 V unless otherwise specified Min Max Ground amp section Output voltage VOUT1, 2, 3 01 200 300 mV Common mode variation VCMV(-)SENSE from 0.0 V to 2 V 1, 2, 3 01 5 mV Load regulation VLDIL= 0.0 mA to 20 mA 1
39、01 10 mV 2, 3 15 Adjust amp section Input offset voltage VOSA/A out = 1.5 V, VCM= 0.0 V 1, 2, 3 01 40 60 mV Input bias current IIB1, 2, 3 01 -2 A Open loop gain AV1.5 V A/A out 2.25 V 4, 5, 6 01 65 dB Transconductance gMIOUT= -10 A to +10 A, VOUT= 1.5 V 4, 5, 6 01 1.7 4.5 mho Output sink current ISK
40、VID= 0.0 V, A/A out = 1.5 V 1, 2, 3 01 55 225 A Output source current ISCVID= 250 mV, A/A out = 1.5 V 1, 2, 3 01 110 350 A Output voltage high VOHVID= 250 mV, IOUT= -50 A 1, 2, 3 01 2.20 2.90 V Output voltage low VOLVID= 0.0 V, IOUT= 50 A 1, 2, 3 01 0.75 1.15 V Common mode rejection ratio CMRR VCM=
41、0.0 V to 10 V 4, 5, 6 01 70 dB Output gain to V/A VOUTA/A = 1.5 V to 2 V 4, 5, 6 01 50 64 mV/V (+)SENSE/ A/A out See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SU
42、PPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions -55C TA+125C Group A subgroups Device type Limits 1/ Unit VIN= +15 V unless otherwise specified Min Max Current amp sectio
43、n Gain A VCM= 0.0 V, VID= 50 mV to 100 mV 4, 5, 6 01 19.2 20.1 V/V Output voltage VOUT+VC/A= -VC/A= 0.0 V 1 01 210 290 mV 2, 3 180 330 Input offset change with common mode input 1, 2, 3 01 600 V/V Output voltage high VOHVID= 1 V 1, 2, 3 01 10 V Output voltage low VOLVID= -1 V, IL= 1 mA 1, 2, 3 01 45
44、0 mV Power supply rejection ratio PSRR VIN= 4.5 V to 35 V, VCM= 0.0 V 4, 5, 6 01 60 dB Drive amp section. RSET= 500 to artificial ground and opto drive = 15 V Voltage gain A V/A out = 0.5 V to 1 V 4, 5, 6 01 2.3 2.6 V/V ISEToutput voltage high VSETH(+)SENSE = 2.2 V 1, 2, 3 01 3.8 4.4 V ISEToutput vo
45、ltage low VSETL(+)SENSE = 1.8 V 1, 2, 3 01 300 mV Opto output voltage range VVR1, 2, 3 01 4 35 V Zero current input threshold voltage VZ1, 2, 3 01 1.55 1.75 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MIC
46、ROCIRCUIT DRAWING SIZE A 5962-93206 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions -55C TA+125C Group A subgroups Device type Limits 1/ Unit VIN= +15 V unless
47、otherwise specified Min Max Buffer amp section Input offset voltage VOSInput = 1 V 1, 2, 3 01 5 mV Output off impedance ZOInput = 1 V, output = 1.5 V to 2.0 V 1, 2, 3 01 5 20 k Output source current ISInput = 1 V, output = 0.5 V 1, 2, 3 01 6 mA Power supply rejection ratio PSRR VIN= 4.5 V to 35 V 4,
48、 5, 6 01 70 dB Common mode rejection ratio CMRR VIN= 0.3 V to 10 V 4, 5, 6 01 70 dB Under voltage lockout section Start-up threshold voltage VTH1, 2, 3 01 4.4 V Status indicate section Output voltage low VOLA/A- = current share bus 1, 2, 3 01 0.5 V Output leakage current ILKA/A out = 1 V, VOUT= 35 V 1, 2, 3 01 5 A Total stand by current section Start- up current ISUVIN= UVLO 0
