1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add device types 04, 05, and 06. Add case outlines D and H. Make changes to 1.3, table I, and figure 1. 96-11-07 R. MONNIN B Replaced reference to MIL-STD-973 with reference to MIL-PRF-38535. Drawing updated to reflect current requirements. - gt
2、04-01-08 R. MONNIN C Update boilerplate paragraph to current MIL-PRF-38535 requirements. - ro 11-12-06 C. SAFFLE REV SHET REV C SHET 15 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY RICK C. OFFICER DLA LAND AND MARITIME COLUMBUS, OHI
3、O 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY RAJESH R. PITHADIA APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, JFET-INPUT SINGLE/DUAL/QUAD OPERATIONAL AMPLIFIE
4、R, MONOLITHIC SILICON DRAWING APPROVAL DATE 94-04-14 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-94602 SHEET 1 OF 15 DSCC FORM 2233 APR 97 5962-E093-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 596
5、2-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlin
6、es and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94602 01 Q P A Federal stock class designator RHA
7、 designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA des
8、ignator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number
9、Circuit function 01 TLE2071M JFET-input operational amplifier 02 TLE2072M JFET-input dual operational amplifier 03 TLE2074M JFET-input quad operational amplifier 04 TLE2071AM JFET-input operational amplifier 05 TLE2072AM JFET-input dual operational amplifier 06 TLE2074AM JFET-input quad operational
10、amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
11、 accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style C GDIP1-T14 or CDIP2-T14 14 Dual-in-line D GDF
12、P1-F14 or CDFP2-F14 14 Flat pack H GDFP1-F10 or CDFP2-F10 10 Flat pack P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Pro
13、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ Supply voltage (+VCC) . +1
14、9 V dc Supply voltage (-VCC) . -19 V dc Differential input voltage 3/ . +VCCto -VCCInput voltage range (VI) (any input) . +VCCto -VCCInput current (II) (each input) . 1 mA Output current (IO) . 80 mA Total current into +VCCterminal 160 mA Total current into -VCCterminal . -160 mA Duration of short c
15、ircuit current at (or below) +25C 4/ . Unlimited Storage temperature range . -65C to +150C Junction temperature . +150C Power dissipation (PD): Case C 5/ 1375 mW Case D 5/ 680 mW Case H 5/ 675 mW Case P 5/ 1050 mW Case 2 5/ 1375 mW Thermal resistance, junction-to-case (JC) See MIL-STD-1835 1.4 Recom
16、mended operating conditions. Supply voltage (VCC) . 2.25 V dc minimum, 19 V dc maximum Common-mode input voltage (VIC) (VCC= 5 V) -0.8 V dc minimum, 5 V dc maximum Common-mode input voltage (VIC) (VCC= 15 V) -10.8 V dc minimum, 15 V dc maximum Ambient operating free-air temperature (TA) . -55C to +1
17、25C Source resistance from ground to input terminals (RS) . 50 _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ All voltage values, except differential voltages, are w
18、ith respect to the midpoint between +VCCand -VCC. 3/ Differential voltages are at the noninverting input with respect to the inverting input. 4/ The output may be shorted to either supply. Temperature and supply voltage must be limited to ensure that the maximum dissipation rating is not exceeded. 5
19、/ Above TA= +25C derate at a factor of 11 mW/C for cases C and 2, 8 mW/C for case D, 5.4 mW/C for case H, and 8.4 mW/C for case P. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME C
20、OLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the is
21、sues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Stand
22、ard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Documen
23、t Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws
24、and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. Th
25、e modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical d
26、imensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connec
27、tions. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall
28、 apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 h
29、erein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still
30、be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL
31、-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-399
32、0 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate
33、of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the ma
34、nufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or
35、 for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired t
36、o this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required docu
37、mentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 61 (see MIL-PRF-38535, appendix A). Provided by IHSNot for Resa
38、leNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA +125C
39、unless otherwise specified Group A subgroups Device type Limits 1/ Unit Min Max Input offset voltage VIOVCC= 5 V, VIC= 0 V, 1 01 -4 4 mV RS= 50 2, 3 -9.2 9.2 1 02 -6 6 2, 3 -10.5 10.5 1 03 -5 5 2, 3 -10.5 10.5 1 04 -2 2 2, 3 -7.2 7.2 1 05 -3.5 3.5 2, 3 -8 8 1 06 -3 3 2, 3 -8.5 8.5 VCC= 15 V, VIC= 0
40、V, 1 01 -4 4 RS= 50 2, 3 -9.2 9.2 1 02 -6 6 2, 3 -10.5 10.5 1 03 -5 5 2, 3 -10.5 10.5 1 04 -2 2 2, 3 -7.2 7.2 1 05 -3.5 3.5 2, 3 -8 8 1 06 -3 3 2, 3 -8.5 8.5 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICR
41、OCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA+125C Group A subgroups Device type Limits Unit unless otherwise specified Min Ma
42、x Input offset current IIOVCC= 5 V, VIC= 0 V, RS= 50 , TA= -55C, +125C 2, 3 All -20 20 nA VCC= 15 V, VIC= 0 V, RS= 50 , TA= -55C, +125C 2, 3 -20 20 Input bias current IIBVCC= 5 V, VIC= 0 V, RS= 50 , TA= -55C, +125C 2, 3 All -60 60 nA VCC= 15 V, VIC= 0 V, RS= 50 , TA= -55C, +125C 2, 3 -60 60 Common-m
43、ode input voltage range VICRVCC= 5 V 1 All -1 to 5 V 2, 3 -0.8 to 5 VCC= 15 V 1 01, 04 -11 to 15 2, 3 -10.9 to 15 1 02, 03, 05, 06 -11 to 15 2, 3 -10.8 to 15 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICR
44、OCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 1/ Unit Mi
45、n Max Maximum positive peak output voltage swing +VOMVCC= 5 V, IOUT= -200 A 1 All 3.8 V 2, 3 3.6 VCC= 5 V, IOUT= -2 mA 1 3.5 2, 3 3.3 VCC= 5 V, IOUT= -20 mA 1 1.5 2, 3 1.4 VCC= 15 V, 1 13.8 IOUT= -200 A 2, 3 13.6 VCC= 15 V, IOUT= -2 mA 1 13.5 2, 3 13.3 VCC= 15 V, 1 11.5 IOUT= -20 mA 2, 3 11.4 Maximu
46、m negative peak output voltage swing -VOMVCC= 5 V, IOUT= 200 A 1 All -3.8 V 2, 3 -3.6 VCC= 5 V, IOUT= 2 mA 1 -3.5 2, 3 -3.3 VCC= 5 V, IOUT= 20 mA 1 -1.5 2, 3 -1.4 VCC= 15 V, 1 -13.8 IOUT= 200 A 2, 3 -13.6 VCC= 15 V, IOUT= 2 mA 1 -13.5 2, 3 -13.3 VCC= 15 V, IOUT= 20 mA 1 -11.5 2, 3 -11.4 See footnote
47、s at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94602 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 9 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characte
48、ristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits 1/ Unit Min Max Large signal differential voltage amplification AVDVCC= 5 V, VO= 2.3 V, RL= 600 1 All 80 dB 2, 3 78VCC= 5 V, VO= 2.3 V, RL= 2 k 1 90 2, 3 88VCC= 5 V, VO= 2.3 V, RL= 10 k 1 95 2, 3 93VCC= 15 V, VO= 10 V, RL= 600 1 80 2, 3 78VCC= 15 V, VO= 10 V, RL= 2 k 1 90 2, 3 88VCC= 15 V, VO= 10 V, RL= 10
