1、COMMERCIAL ITEM DESCRIPTION RETRACTOR, TRACHEAL, HPP The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specification MIL-R-36987(1) which is cancelled. This Commercial Item Description covers tracheal retractors suitable for
2、retraction of the trachea in surgical procedures. Salient characteristics: General. of the following types: The retractor shall be of the Hupp design, and be Type I - 1 sharp prong. Type II - 3 sharp prongs. Material. The retractor shall be.fabricated from class 3, type 302 or 304 austenitic corrosi
3、on-resistant steel or class 4, martensitic corrosion-resistant steel in accordance with ASTM F899. A-A-54572 65 = 9999974 0063454 7 A-A-54 572 17 January 1992 Hardness. The retractor shall have a Rockwell hardness (HRB) scale of 75 to 85 for class 3 material and Rockwell hardness (HRC) scale of 40 t
4、o 45 for class 4 material when tested in accordance with ASTM E18 or E92 whichever is applicable. Conversion of hardness values shall be in accordance with ASTM E140. Stvle, desisn and dimensions. The retractor shall be in accordance with Figure 1 or 2 for style, design and dimensions. Finish. The r
5、etractor shall have a mirror, satin, or matte finish. Passivation. The retractor shall be properly Passivated. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. distribution.is unlimited. Approved for public release: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
6、 IHS-,-,-A-A-54572 b5 9999974 00b3455 9 A-A-54572 Corrosion resistance. The retractor shall no evidence of corrosion or plating of copper when tested for corrosion resistance in accordance with ASTM F1089. Identification markins and labelins. The retractor shall be legibly marked with the contractor
7、s name or registered trademark and the word tlstainlessll. retractors shall bear the name of the country of origin. Foreign manufactured Workmanshia. The retractor shall be free from defects which detract from its appearance or impair its serviceability. Unit. Each (EA). One retractor, as specified,
8、 constitutes one unit. QUALITY ASSURANCE PROVISIONS. Responsibilitv for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as.specified herein. Except otherwise specified in the contract or purcha
9、se order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are
10、 deemed necessary to assure supplies and services conform to prescribed requirements. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon request, at any time, or from time to time, during the performanc
11、e of the contract and for a period of three years after delivery of the supplies to which such records relate. Records. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and
12、 testing (determination by technical means of physical and chemical properties) of the item. Samplinq for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, and as specified herein. retractor. Sampling shall be Inspection level II with an acceptable quality leve
13、l (AQL) of 1.0. Unit of product for examination purposes shall be one Examination. Examination shall be conducted to determine compliance with specification requirements. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54572 65 7997774 0063456
14、O A-A-54572 SamDlina for tests. Sampling for tests shall be conducted in Unit of Sampling shall Tests shall be conducted to determine compliance with accordance with MIL-STD-105 and as specified herein. product for test purposes shall be one retractor. be Inspection level S-2 with an AQL of 1.0. spe
15、cification requirements. Where feasible, the same sample shall be used for the determination of two or more text characteristics. Tests. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers
16、 own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric products. Products manufactured to me
17、tric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. . If a pr
18、oduct is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. Requla
19、torv reauirements. Federal Food, Drucf, and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction , the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with t
20、he requirements of the Federal Food, Drug Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal State, and local stat
21、utes, ordinances, and regulations. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-54572 65 = 9999974 ClOb3457 2 = A-A-54 5 7 2 Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acqu
22、isition Regulation Subpart 23.4 to the maximum extent practical. Preservation. packauina. x, ackina. labelina. and markina. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shippi
23、ng conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in
24、the contract and/or order. Ordering data (Intermediate/exterior package quantities and labeling and marking must be specified in the contract and/or order). NOTE: document : The following National Stock Numbers are covered by this - NSN Item Identification TYPE 6515-00-361-8950 RETRACTOR, TRACHEAL,
25、HPP , I 6515-00-361-8980 RETRACTOR, TRACHEAL, HUPP , II 1 Sharp Prong. 3 Sharp Prongs. MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD-MB Amy-MD Agent: Navy-MS Air Force-O3 DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS Project No. 6515-5253 4 Provided by IHSNot for Resa
26、leNo reproduction or networking permitted without license from IHS-,-,-A-A-54572 65 9999974 0063458 4 4% II I -16) t I T- A O -2 U I i I ! ! I i -1-T +I -IN P L I l i t i ml 3 A-A-54572 a z 7 a a 3 I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-
27、A-54572 65 9999974 80b3459 b m I TYPE IC SECT. G-G TOFR4KES IND ICATED DEL INEATE ACCEPTABLE EXTREME D IENS IONS AND ARE N3T INTENDED TO PERM IT VAR IAT IONS I ITH IN A S INXE INSTRUMENT Wi ICH WILL SACR IF ICE UN IFoiuI IR, Wt,!TR(, AND F IFET WL IN WmWNcH IP. ALERNATE DESIGN N5bJ6515-00-361-8900 RETRACTOR ,TRACHEAL,HUPP, 3 SHARP PRONGS FIGURE 2 , 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
