ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf

上传人:figureissue185 文档编号:704678 上传时间:2019-01-03 格式:PDF 页数:86 大小:3.10MB
下载 相关 举报
ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf_第1页
第1页 / 共86页
ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf_第2页
第2页 / 共86页
ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf_第3页
第3页 / 共86页
ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf_第4页
第4页 / 共86页
ECMA 211-2001 Private Integrated Services Network (PISN) - Specification Functional Model and Information Flows - Advice of Charge Supplementary Services (3rd Edition)《专用综合业务网络(PIS.pdf_第5页
第5页 / 共86页
点击查看更多>>
资源描述

1、 Standard ECMA-211 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Advice of Charge Supplementary Services Phone: +41 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:

2、/www.ecma.ch - Internet: helpdeskecma.ch . Standard ECMA-211 3rd Edition - December 2001 Standardizing Information and Communication Systems Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Advice of Charge Supplementary Services (AOCSD) Phone: +41

3、 22 849.60.00 - Fax: +41 22 849.60.01 - URL: http:/www.ecma.ch - Internet: helpdeskecma.ch IW Ecma-211.doc 14-01-02 09,49 . Brief History This Standard is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The seri

4、es uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This particular Standard specifies the Advice of Charge supplementary services. This Standard is based upon the practical experience of ECMA me

5、mber companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. Compared to the 1st Edition of Standard ECMA-211 (published by ECMA

6、in December 1994), the 2nd Edition (published by ECMA in June 1997) incorporated changes in order to achieve complete alignment with International Standard ISO/IEC 15049:1997(E) published by ISO/IEC in May 1997. Adopted as 3rd Edition of Standard ECMA-211 by the General Assembly of December 2001. -

7、i - Table of contents 1 Scope 1 2 Conformance 1 3 References (normative) 1 4 Definitions 2 4.1 External definitions 2 4.2 Other definitions 3 4.2.1 Additional Network Feature 3 4.2.2 Call, basic call 3 4.2.3 Charged call 3 4.2.4 Local currency unit 3 4.2.5 Served user 4 5 List of acronyms 4 6 SS-AOC

8、-S stage 1 specification 4 6.1 Description 4 6.1.1 General description 4 6.1.2 Qualifications on applicability to telecommunication services 4 6.2 Procedures 4 6.2.1 Provision/withdrawal 4 6.2.2 Normal procedures 5 6.2.3 Exceptional procedures 5 6.3 Interactions with other supplementary services and

9、 ANFs 5 6.3.1 Advice of charge: charging information during the call (AOC-D) 5 6.3.2 Advice of charge: charging information at the end of the call (AOC-E) 6 6.3.3 Calling Line Identification Presentation (CLIP) 6 6.3.4 Connected Line Identification Presentation (COLP) 6 6.3.5 Calling/Connected Line

10、Identification restriction (CLIR) 6 6.3.6 Calling Name Identification presentation (CNIP) 6 6.3.7 Connected Name Identification Presentation (CONP) 6 6.3.8 Calling/Connected Name Identification restriction (CNIR) 6 6.3.9 Call Diversion (CFU/CFB/CFNR/CD) 6 6.3.10 Call Interception (CINT) 6 6.3.11 Cal

11、l Intrusion (CI) 6 6.3.12 Call Offer (CO) 6 6.3.13 Call Transfer (CT) 6 6.3.14 Completion of Calls to Busy Subscribers (CCBS) 6 6.3.15 Completion of Calls on No Reply (CCNR) 7 6.3.16 Do Not Disturb (DND) 7 6.3.17 Do Not Disturb Override (DNDO) 7 - ii - 6.3.18 Path Replacement (ANF-PR) 7 6.3.19 Recal

12、l (RE) 7 6.3.20 Wireless Terminal Location Registration (WTLR) 7 6.3.21 Wireless Terminal Mobility Incoming Call (ANF-WTMI) 7 6.4 Interworking considerations 7 6.4.1 Interworking with public ISDN 7 6.4.2 Interworking with PSTN 7 6.5 Overall SDL 7 7 SS-AOC-D stage 1 specification 9 7.1 Description 9

13、7.1.1 General description 9 7.1.2 Qualifications on applicability to telecommunication services 9 7.2 Procedures 9 7.2.1 Provision/withdrawal 9 7.2.2 Normal procedures 9 7.2.3 Exceptional procedures 9 7.3 Interactions with other supplementary services and ANFs 10 7.3.1 Advice of charge: charging inf

14、ormation at call set-up time (AOC-S) 10 7.3.2 Advice of charge: charging information at the end of the call (AOC-E) 10 7.3.3 Calling Line Identification Presentation (CLIP) 10 7.3.4 Connected Line Identification Presentation (COLP) 10 7.3.5 Calling/Connected Line Identification restriction (CLIR) 10

15、 7.3.6 Calling Name Identification presentation (CNIP) 10 7.3.7 Connected Name Identification Presentation (CONP) 10 7.3.8 Calling/Connected Name Identification restriction (CNIR) 10 7.3.9 Call Diversion (CFU/CFB/CFNR/CD) 10 7.3.10 Call Interception (CINT) 10 7.3.11 Call Intrusion (CI) 11 7.3.12 Cal

16、l Offer (CO) 11 7.3.13 Call Transfer (CT) 11 7.3.14 Completion of Calls to Busy Subscribers (CCBS) 11 7.3.15 Completion of Calls on No Reply (CCNR) 11 7.3.16 Do Not Disturb (DND) 11 7.3.17 Do Not Disturb Override (DNDO) 11 7.3.18 Path Replacement (ANF-PR) 11 7.3.19 Recall (RE) 11 7.3.20 Wireless Ter

17、minal Location Registration (WTLR) 11 7.3.21 Wireless Terminal Mobility Incoming Call (ANF-WTMI) 11 7.4 Interworking considerations 11 7.4.1 Interworking with public ISDN 11 7.4.2 Interworking with PSTN 11 7.5 Overall SDL 12 8 SS-AOC-E stage 1 specification 14 8.1 Description 14 - iii - 8.1.1 Genera

18、l description 14 8.1.2 Qualifications on applicability to telecommunication services 14 8.2 Procedures 14 8.2.1 Provision/withdrawal 14 8.2.2 Normal procedures 14 8.2.3 Exceptional procedures 14 8.3 Interactions with other supplementary services and ANFs 15 8.3.1 Advice of charge: charging informati

19、on at call set-up time (AOC-S) 15 8.3.2 Advice of charge: charging information during the call (AOC-D) 15 8.3.3 Calling Line Identification Presentation (CLIP) 15 8.3.4 Connected Line Identification Presentation (COLP) 15 8.3.5 Calling/Connected Line Identification restriction (CLIR) 15 8.3.6 Callin

20、g Name Identification presentation (CNIP) 15 8.3.7 Connected Name Identification Presentation (CONP) 15 8.3.8 Calling/Connected Name Identification restriction (CNIR) 15 8.3.9 Call Diversion (CFU/CFB/CFNR/CD) 15 8.3.10 Call Interception (CINT) 15 8.3.11 Call Intrusion (CI) 16 8.3.12 Call Offer (CO)

21、16 8.3.13 Call Transfer (CT) 16 8.3.14 Completion of Calls to Busy Subscribers (CCBS) 16 8.3.15 Completion of Calls on No Reply (CCNR) 16 8.3.16 Do Not Disturb (DND) 16 8.3.17 Do Not Disturb Override (DNDO) 16 8.3.18 Path Replacement (ANF-PR) 16 8.3.19 Recall (RE) 17 8.3.20 Wireless Terminal Locatio

22、n Registration (WTLR) 17 8.3.21 Wireless Terminal Mobility Incoming Call (ANF-WTMI) 17 8.4 Interworking considerations 17 8.4.1 Interworking with public ISDN 17 8.4.2 Interworking with PSTN 17 8.5 Overall SDL 17 9 SS-AOC stage 2 specification 19 9.1 Functional model 19 9.1.1 Functional model descrip

23、tion 19 9.1.2 Description of functional entities 19 9.1.3 Relationship of functional model to basic call functional model 20 9.2 Information flows 20 9.2.1 Definition of information flows 20 9.2.2 Relationship of information flows to basic call information flows 30 9.2.3 Examples of information flow

24、 sequences 32 9.3 Functional entity actions 49 9.3.1 Functional entity actions of FE1 49 9.3.2 Functional entity actions of FE2 49 9.3.3 Functional entity actions of FE3 50 - iv - 9.4 Functional entity behaviour 50 9.4.1 Behaviour of FE1 50 9.4.2 Behaviour of FE2 52 9.4.3 Behaviour of FE3 58 9.5 All

25、ocation of functional entities to physical equipment 61 Annex A - Structures, contents and application of charging information given by AOC-S 63 Annex B - Structures, contents and application of charging information given by AOC-D 67 Annex C - Structures, contents and application of charging informa

26、tion given by AOC-E 69 Annex D - Charging assumptions for advice of charge in PISNs 71 1 Scope This Standard specifies the Supplementary Services Advice of Charge (SS-AOC), which are applicable to various basic services supported by Private Integrated Services Networks (PISN). Basic services are spe

27、cified in ECMA-142. SS-AOC is a set of supplementary services which enable a user to receive information about the charging of its calls that leave the PISN and enter another network. AOC-S enables the user to receive information about the charging rates at call set-up time and also to receive furth

28、er information during the call if there is a change of charging rates. AOC-D enables the user to receive information on the recorded charges during the active phase of the call. AOC-E enables the user to receive information on the recorded charges when the call is terminated. The provision of chargi

29、ng information to the called user, the provision of charging information for calls that do not leave the PISN, and PISN accounting are outside the scope of this Standard. Charging assumptions which apply to the specification of SS-AOC in this Standard are contained in annex D. Service specifications

30、 are produced in three stages, according the method described in ETS 300 387. This Standard contains the stage 1 and stage 2 specifications of SS-AOC. The stage 1 specifications (clauses 6, 7, 8) specify the supplementary services as seen by users of PISNs. The stage 2 specification (clause 9) ident

31、ifies the functional entities involved in the supplementary services and the information flows between them. 2 Conformance In order to conform to this Standard, a Stage 3 standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the s

32、upplementary services specified in this Standard. This means that, to claim conformance, a Stage 3 standard is required to be adequate for the support of those aspects of clauses 6, 7 and 8 (stage 1) and clause 9 (stage 2) which are relevant to the interface or equipment to which the Stage 3 standar

33、d applies. 3 References (normative) The following standards contain provisions which, through reference in this text, constitute provisions of this Standard. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of apply

34、ing the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. ECMA-133 Private Integrated Se

35、rvices Network (PISN) - Reference Configuration for PISN Exchanges (PINX) (International Standard ISO/IEC 11579-1) ECMA-142 Private Integrated Services Network (PISN) - Circuit-mode 64 kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows (International Standard

36、 ISO/IEC 11574) ECMA-173 Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Call Diversion Supplementary Services (International Standard ISO/IEC 13872) ECMA-177 Private Integrated Services Network (PISN) - Specification, Functional Model and Informa

37、tion Flows - Call Transfer Supplementary Service (International Standard ISO/IEC 13865) ETS 300 387 Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services (1994) ITU-T Rec. I.112 Vocabulary of terms for ISDNs (1993) - 2 - ITU-T Rec. I.210 Principles

38、 of telecommunication services supported by an ISDN and the means to describe them (1993) ITU-T Rec. Z.100 Specification and description language (1999) 4 Definitions For the purposes of this Standard, the following definitions apply. 4.1 External definitions This Standard uses the following terms d

39、efined in other documents: Basic Service (ITU-T Rec. I.210) Connection (ITU-T Rec. I.112) Private Integrated Services Network (PISN) (ECMA-133) Private Integrated services Network eXchange (PINX) (ECMA-133) Service (ITU-T Rec. I.112) Signalling (ITU-T Rec. I.112) Supplementary Service (ITU-T Rec. I.

40、210) User (ECMA-142) For the description of the interaction with the supplementary service Call Transfer, the following terms are used, which are defined in ECMA-177: Primary call Secondary call User A (the transferring user) User B User C Transfer by join Transfer by rerouteing For the description

41、of the interaction with the Diversion supplementary services, the following terms are used, which are defined in ECMA-173: Diverting user Deflecting user This Standard refers to the following basic call functional entities (FEs) defined in ECMA-142: Call Control (CC) Call Control Agent (CCA) This St

42、andard refers to the following basic call inter-FE relationships defined in ECMA-142: r1 r2 This Standard refers to the following basic call information flows defined in ECMA-142: SETUP request/indication SETUP response/confirmation CHANNEL ACKNOWLEDGE request/indication - 3 - REPORT request/indicat

43、ion DISCONNECT request/indication RELEASE request/indication This Standard refers to the following Call Transfer functional entities (FEs) defined in ECMA-177: FE1 FE2 FE3 FE5 FE6 FE7 This Standard refers to the following Call Transfer inter-FE relationship defined in ECMA-177: rr This Standard refe

44、rs to the following Call Diversion functional entities (FEs) defined in ECMA-173: FE3 FE4 FE5 FE6 This Standard refers to the following Call Diversion inter-FE relationship defined in ECMA-173: rc rd re This Standard refers to the following Call Diversion information flows defined in ECMA-173: rc-DI

45、VERT request/indication rc-DIVERT response/confirmation re-INFORM4 request/indication 4.2 Other definitions 4.2.1 Additional Network Feature A capability, over and above that of a basic service, provided by a PISN, but not directly to a PISN user. 4.2.2 Call, basic call An instance of the use of a b

46、asic service. 4.2.3 Charged call A call that can potentially attract charges as a result of being routed to another network. NOTE A charged call can be found to be free of charge e.g. if it remains within the PISN or is not charged for by the network to which it was routed. A PISN can treat all call

47、s or only certain classes of calls as charged calls (e.g. based on the number of the called user). 4.2.4 Local currency unit The currency unit of the country in which the served users PINX is located. - 4 - 4.2.5 Served user The charged user who is provided with advice of charge information. 5 List

48、of acronyms ANF Additional Network Feature AOC Advice of Charge AOC-S Advice of Charge: charging information at call set-up time AOC-D Advice of Charge: charging information during the call AOC-E Advice of Charge: charging information at the end of the call CC Call Control (functional entity) CCA Ca

49、ll Control Agent (functional entity) CT Call Transfer DIV Call Diversion FE Functional Entity PINX Private Integrated services Network eXchange PISN Private Integrated Services Network PSTN Public Switched Telephone Network SDL Specification and Description Language SS Supplementary Service TE Terminal Equipment 6 SS-AOC-S stage 1 specification 6.1 Description 6.1.1 General description SS-AOC-S provides the served user with information about the charging rates for its current call. This can be at the

展开阅读全文
相关资源
猜你喜欢
  • BS EN 16905-3-2017 Gas-fired endothermic engine driven heat pumps Test conditions《燃气式吸热发动机驱动热泵 试验条件》.pdf BS EN 16905-3-2017 Gas-fired endothermic engine driven heat pumps Test conditions《燃气式吸热发动机驱动热泵 试验条件》.pdf
  • BS EN 16905-4-2017 Gas-fired endothermic engine driven heat pumps Test methods《燃气式吸热发动机驱动热泵 试验方法》.pdf BS EN 16905-4-2017 Gas-fired endothermic engine driven heat pumps Test methods《燃气式吸热发动机驱动热泵 试验方法》.pdf
  • BS EN 16905-5-2017 Gas-fired endothermic engine driven heat pumps Calculation of seasonal performances in heating and cooling mode《燃气式吸热发动机驱动热泵 加热和冷却模式的季节性能计算》.pdf BS EN 16905-5-2017 Gas-fired endothermic engine driven heat pumps Calculation of seasonal performances in heating and cooling mode《燃气式吸热发动机驱动热泵 加热和冷却模式的季节性能计算》.pdf
  • BS EN 16906-2017 Liquid petroleum products Determination of the ignition quality of diesel fuels BASF engine method《液态石油产品 柴油点火品质的测定 巴斯夫发动机法》.pdf BS EN 16906-2017 Liquid petroleum products Determination of the ignition quality of diesel fuels BASF engine method《液态石油产品 柴油点火品质的测定 巴斯夫发动机法》.pdf
  • BS EN 16908-2017 Cement and building lime Environmental product declarations Product category rules complementary to EN 15804《水泥和建筑石灰 环境产品声明 EN 15804产品类别规则补充》.pdf BS EN 16908-2017 Cement and building lime Environmental product declarations Product category rules complementary to EN 15804《水泥和建筑石灰 环境产品声明 EN 15804产品类别规则补充》.pdf
  • BS EN 16909-2017 Ambient air Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters《环境空气 过滤器收集元素碳(EC)和有机碳(OC)的测量》.pdf BS EN 16909-2017 Ambient air Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters《环境空气 过滤器收集元素碳(EC)和有机碳(OC)的测量》.pdf
  • BS EN 169100-1993 Harmonized system of quality assessment for electronic components Sectional specification quartz crystal controlled oscillators (capability approval)《电子元器件质量评定协调体.pdf BS EN 169100-1993 Harmonized system of quality assessment for electronic components Sectional specification quartz crystal controlled oscillators (capability approval)《电子元器件质量评定协调体.pdf
  • BS EN 169101-1995 Specification for harmonized system of quality assessment for electronic components Blank detail specification quartz crystal controlled oscillators (capability a.pdf BS EN 169101-1995 Specification for harmonized system of quality assessment for electronic components Blank detail specification quartz crystal controlled oscillators (capability a.pdf
  • BS EN 16914-2017 Aluminium and aluminium alloys Hot-rolled armour plates in weldable aluminium alloy Technical delivery conditions《铝和铝合金 可焊铝合金热轧装甲板 交货技术条件》.pdf BS EN 16914-2017 Aluminium and aluminium alloys Hot-rolled armour plates in weldable aluminium alloy Technical delivery conditions《铝和铝合金 可焊铝合金热轧装甲板 交货技术条件》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1