1、BRITISH STANDARD BS EN 1366-7:2004 Fire resistance tests for service installations Part 7: Conveyor systems and their closures The European Standard EN 1366-7:2004 has the status of a British Standard ICS 13.220.50 BS EN 1366-7:2004 This British Standard was published under the authority of the Stan
2、dards Policy and Strategy Committee on 8 July 2004 BSI 8 July 2004 ISBN 0 580 44018 4 National foreword This British Standard is the official English language version of EN 1366-7:2004. The UK participation in its preparation was entrusted by Technical Committee FSH/22, Fire resistance tests, to Sub
3、committee FSH/22/5, Fire resistance testing of doors, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in th
4、is document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a co
5、ntract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals
6、 for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 57 and a back cover. The BSI copyright notice displayed
7、 in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN13667 June2004 ICS13.220.50 Englishversion FireresistancetestsforserviceinstallationsPart7:Conveyor systemsandtheirclosures Essais
8、dersistanceaufeudesinstallationstechniques Partie7:Fermeturesdepassagespourconvoyeurset bandestransporteuses FeuerwiderstandsprfungenfrInstallationenTeil7: FrderanlagenundihreAbschlsse ThisEuropeanStandardwasapprovedbyCENon2February2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulation
9、swhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(E
10、nglish,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,Fran
11、ce, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassa
12、rt,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN13667:2004:EEN 1366-7:2004 (E) 2 Contents page Foreword3 1 Scope6 2 Normative references6 3 Terms and definitions .7 4 Test equipment8 5 Test conditions8 6 Test specimen12 7 Inst
13、allation of test specimen 16 8 Conditioning.32 9 Application of instrumentation.33 10 Test procedure.47 11 Performance criteria48 12 Test report48 13 Field of direct application of test results 49 14 Classification51 Annex A (normative) Arrangement of unexposed thermocouples on closures for conveyor
14、 systems with non-rectangular shapes52 Annex B (normative) Part configuration test specimen.53 B.1 General53 B.2 Changes to the penetrating components53 B.3 Large test specimen 53 Annex C (informative) General guidance on the design of closure and conveyor system assemblies and their classification
15、for self closing durability55 C.1 General55 C.2 Self closing durability .55 C.3 General guidance for closure and conveyor system assemblies 56 Bibliography 57 EN 1366-7:2004 (E) 3 Foreword This document (EN 1366-7:2004) has been prepared by Technical Committee CEN/TC 127 “Fire safety in buildings”,
16、the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest by December 2004. This d
17、ocument has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. EN 1366 Fire resistance tests for service installations consists of the following parts: Part 1: Ducts Part 2: Fire dampers Part 3 1) : Penetration seals Part 4 1) : Linear join
18、t seals Part 5: Service ducts and shafts Part 6 1) : Raised access floors and hollow floors Part 7: Conveyor systems and their closures Part 8 1) : Smoke extraction ducts Part 9 1) : Single compartment smoke extraction ducts Part 10 1) : Smoke control dampers Part 11 1) : Fire protective systems for
19、 essential services Annex A and annex B are normative and annex C is informative. 1)In course of preparation. EN 1366-7:2004 (E) 4 This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to im
20、plement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingd
21、om. EN 1366-7:2004 (E) 5 Introduction This part of this European Standard was developed to provide a method of fire resistance testing for assessing the contribution of a closure for a conveyor system together with all its anchoring parts and the frame/guide included to the fire resistance of a sepa
22、rating element when penetrated by a conveyor system including any relevant penetrating components. Caution The attention of all persons concerned with managing and carrying out this fire resistance test is drawn to the fact that fire testing may be hazardous and that there is a possibility that toxi
23、c and/or harmful smoke and gases may be evolved during the test. Mechanical and operational hazards may also arise during the construction of the test elements or structures, their testing and disposal of test residues. An assessment of all potential hazards and risks to health should be made and sa
24、fety precautions should be identified and provided. Written safety instructions should be issued. Appropriate training should be given to relevant personnel. Laboratory personnel should ensure that they follow written safety instructions at all times. EN 1366-7:2004 (E) 6 1 Scope This part of this E
25、uropean Standard specifies a method of fire testing to determine the fire resistance of closure and conveyor system assemblies designed for installation within openings of separating elements, including any sealing necessary between the closure for a conveyor system and any penetrating components li
26、ke conveyor tracks, electrical cables and pneumatic pipes being essential parts of the closure and conveyor system assembly together with the penetration seal. This part of European Standard is not applicable to other test methods required to fully assess closures for conveyor systems, e.g. test met
27、hods to evaluate the serviceability and reliable functioning of interconnected systems. The fire testing of fire dampers for heating and ventilation systems, fire doors and shutters for normal traffic paths and the movement of liquid and combustible gas, are specifically excluded from this European
28、Standard. This European Standard is read in conjunction with EN 1363-1. In the absence of any European Technical Specification for closure and conveyor system assemblies, this European Standard gives advice on the classification of durability for closure and conveyor system assemblies. 2 Normative r
29、eferences This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any o
30、f these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). prEN 520, Gypsum plasterboards Definitions, requirements and test methods. EN 1191, Win
31、dows and doors Resistance to repeated opening and closing Test method. EN 1363-1, Fire resistance tests Part 1: General requirements. EN 1363-2, Fire resistance tests Part 2: Alternative and additional procedures prEN 1366-3, Fire resistance tests for service installations Part 3: Penetration seals.
32、 EN 1634-1, Fire resistance tests for door and shutter assemblies Part 1: Fire doors and shutters. EN 12605, Industrial, commercial and garage doors and gates Mechanical aspects Test methods. EN 13501-2, Fire classification of construction products and building elements Part 2: Classification using
33、data from fire resistance tests, excluding ventilation services. EN ISO 13943, Fire safety Vocabulary (ISO 13943:2000). EN 1366-7:2004 (E) 7 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 1363-1, prEN 1366-3, EN 1634-1, EN ISO 13943 together
34、 with the following apply. 3.1 anchoring means of attachment of the closure for the conveyor system to the various components of the supporting or associated supporting construction to ensure correct functioning 3.2 associated supporting construction specific construction in which the closure and co
35、nveyor system assembly is to be installed in practice and which is used to close off the furnace and provide the levels of restraint and thermal heat transfer to be experienced in normal use 3.3 clearing device device which is generally part of the conveyor system used to clear the closure area of t
36、ransportable goods during shutting of the closure for the conveyor system 3.4 closing device device to be attached to a closure for a conveyor system which provides a return to closed condition NOTE The closing device ensures that the closure for the conveyor system is closed from any open position.
37、 3.5 closure and conveyor system assembly complete assembly of the closure for the conveyor system and, where relevant, its frame or guide, which is provided for closing off a permanent opening in a separating element. This includes the anchoring parts for the connection with the separating element,
38、 a length of any penetrating component on either side of the construction and the penetration seal, any sealing system between the closure for a conveyor system, the conveyor system and any closing and/or separating device 3.6 closure area vicinity at the opening which needs to be cleared in order t
39、o permit the shutting of the closure for the conveyor system 3.7 closure for a conveyor system device to shut an opening for a conveyor system within a fire separating element NOTE A closure for a conveyor system includes any component used to close the opening e.g. frames, guide rails, pivoting fla
40、ps, fittings and interlocking devices. 3.8 conveyor system arrangement used to transport materials through an opening in a fire separating element NOTE This can be conveyor tracks, remotely controlled or automatic equipment. 3.9 conveyor track arrangement that guides the items to be transported NOTE
41、 This can be e.g. belts, slides, rails, screws, chains and ducts or pipes in which airborne particles are moved. EN 1366-7:2004 (E) 8 3.10 penetration aperture in a separating element for the passage of a penetrating component 3.11 penetrating component elements such as cables, pneumatic and/or hydr
42、aulic pipes and the conveyor system which pass through the separating element and which may influence the performance of a closure for the conveyor system in relation to its fire resistance 3.12 penetration seal system used to maintain the fire resistance of a separating element at the position wher
43、e there is provision for penetrating components (e.g. essential parts of conveyor system, conduits, electrical cables and pipes) to pass through the fire separating element 3.13 separating device arrangement used to separate a continuous conveyor system penetrating an opening in a fire resisting sep
44、arating element to allow a closure to fully advance to its closed position 3.14 standard supporting construction form of construction of known fire resistance used to close off the furnace and support the test specimen being evaluated 3.15 test specimen complete closure and conveyor system assembly
45、which is to be installed in a standard or associated supporting construction to allow it to be evaluated 4 Test equipment The test equipment specified in EN 1363-1, and if applicable EN 1363-2, shall be used. 5 Test conditions 5.1 Heating conditions The heating conditions and the furnace atmosphere
46、shall conform to those given in EN 1363-1, or if applicable, EN 1363-2. NOTE In the presence of any intumescent material used for the test specimen, requirements may exist to apply in addition to the standard temperature-time curve the slow heating curve as given in EN 1363-2. 5.2 Pressure condition
47、s 5.2.1 Vertical installation 5.2.1.1 Closure for a conveyor system assembly installed in practice with its bottom edge not more than 0,5 m above floor level (floor position) The furnace pressure for a vertically oriented test specimen shall conform to the conditions as given in EN 1363-1 (see Figur
48、e 1). EN 1366-7:2004 (E) 9 5.2.1.2 Closure for a conveyor system assembly installed in practice with its bottom edge more than 0,5 m above floor level (raised position) The furnace pressure for a vertically oriented test specimen shall conform to the conditions as given in EN 1363-1 with the exception that the pressure at bottom edge of the test specimen shall be maintained at a minimum of (5 2) Pa. The pressure at the top of the test specimen may be larger than 20 Pa (see Figure 2). 5.2.2 Horizontal installation The furnace pressure shall be measur
