EJ T 542-2005 Specification for sintered gadolinium oxide-uranium dioxide pellets《烧结三氧化二钆-二氧化铀芯块》.pdf

相关资源

EJ T 1243-2017 《医疗器械辐射灭菌 确认辐射灭菌剂量的生物负载数据分析方法》.pdf

EJ T 1242-2017 《晶闸管辐射工艺技术要求》.pdf

EJ T 999-1996 《核燃料后处理厂自控仪表工程设计规定》.pdf

EJ T 997-1996 《压水堆核电厂核安全有关的混凝土结构建造规范》.pdf

EJ T 996-1996 《火山岩型铀矿找矿指南》.pdf

EJ T 995-1996 《放射性矿产资源坑探规程》.pdf

EJ T 992-1996 《二氧化铀中钼的分光光度法测定》.pdf

EJ T 991-1996 《二氧化铀中钛的分光光度法测定》.pdf

EJ T 990-1996 《天然四氟化铀技术条件》.pdf

EJ T 989-1996 《天然二氧化铀技术条件》.pdf

猜你喜欢

ASTM D7682-2012 red 4375 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty《采用仿制腻子复制和测量混凝土表面轮廓的标准试验方法》.pdf

ASTM D7682-2017 0916 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty《采用仿制腻子复制和测量混凝土表面轮廓的标准试验方法》.pdf

ASTM D7683-2011 4375 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)《石油产品浊点标准试验方法(小烧杯试验法)》.pdf

ASTM D7683-2017 red 0625 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)《石油产品和液体燃料浊点的标准试验方法(小测试罐法)》.pdf

ASTM D7684-2011 0625 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants《使用中的润滑油微粒微观特性的标准指南》.pdf

ASTM D7684-2011(2016) 7340 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants《在用润滑剂颗粒的微观表征指南》.pdf

ASTM D7685-2011 0000 Standard Practice for In-Line Full Flow Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative .pdf

ASTM D7685-2011(2016) 4935 Standard Practice for In-Line Full Flow Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Deriv.pdf

ASTM D7686-2011 9375 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument《用固定过滤器红外(IR)仪器现场监控使用中的.pdf