1、BSI Standards PublicationBS EN 14306:2015Thermal insulation productsfor building equipment andindustrial installations Factory made calcium silicate(CS) products SpecificationBS EN 14306:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 14306:2015. It superse
2、des BS EN 14306:2009+A1:2013 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publicat
3、ion does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88438 2 ICS 91.100.60 Compliance with a British Standard cannot confer immunity
4、from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 14306:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14306 Decem
5、ber 2015 ICS 91.100.60 Supersedes EN 14306:2009+A1:2013English Version Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification Produits isolants thermiques pour lquipement du btiment et les installations industriel
6、les - Produits manufacturs en silicate de calcium (CS) - SpcificationWrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstechnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Calciumsilikat (CS) - Spezifikation This European Standard was approved by CEN on 24 October 201
7、5. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained o
8、n application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE
9、LEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
10、y, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenu
11、e Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14306:2015 EBS EN 14306:2015EN 14306:2015 (E) 2 Contents Page European foreword . 4 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols,
12、 units and abbreviated terms . 8 3.1 Terms and definitions . 8 3.1.1 Terms and definitions as given in EN ISO 9229:2007 8 3.1.2 Additional terms and definitions 8 3.2 Symbols, units and abbreviated terms 9 3.2.1 Symbols and units used in this standard 9 3.2.2 Abbreviations used in this standard . 10
13、 4 Requirements 10 4.1 General . 10 4.2 For all applications 10 4.2.1 Thermal conductivity . 10 4.2.2 Dimensions and tolerances 11 4.2.3 Dimensional stability 11 4.2.4 Reaction to fire of the product as placed on the market 11 4.2.5 Durability characteristics . 12 4.3 For specific applications 12 4.
14、3.1 General . 12 4.3.2 Maximum service temperature . 12 4.3.3 Minimum service temperature . 13 4.3.4 Compressive stress or compressive strength 13 4.3.5 Trace quantities of water soluble ions and the pH-value 14 4.3.6 Water vapour diffusion resistance 14 4.3.7 Short-term water absorption by partial
15、immersion . 14 4.3.8 Release of dangerous substances . 14 4.3.9 Continuous glowing combustion 14 5 Test methods . 14 5.1 Sampling 14 5.2 Conditioning . 15 5.3 Testing 15 5.3.1 General . 15 5.3.2 Thermal conductivity . 17 5.3.3 Maximum service temperature . 17 5.3.4 Reaction to fire 17 6 Designation
16、code 18 7 Assessment and Verification of the Constancy of Performance (AVCP) . 18 7.1 General . 18 7.2 Product Type Determination (PTD) 18 7.3 Factory Production Control (FPC) 18 8 Marking and labelling . 19 Annex A (normative) Factory production control . 20 BS EN 14306:2015EN 14306:2015 (E) 3 Anne
17、x B (normative) Determination of minimum service temperature 23 B.1 Definitions . 23 B.2 Principle . 23 B.3 Apparatus 23 B.4 Test specimens 24 B.5 Procedure 24 B.6 Calculation and expression of results . 25 B.7 Accuracy of measurements . 26 B.8 Test report 26 Annex C (informative) Preparation of the
18、 test specimens to measure thermal conductivity . 27 C.1 Preparation of the test specimens to measure thermal conductivity . 27 C.2 Ageing . 27 Annex D (informative) Additional properties . 28 D.1 General . 28 D.2 Coefficient of thermal expansion 28 D.3 Apparent and true porosity 28 D.4 Air flow res
19、istance 28 D.5 Creep in compression 28 D.6 Permeability to gases 28 D.7 Acoustic properties 28 D.8 Bending strength 28 D.9 Apparent density 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 30 ZA.1 Scope and relevant ch
20、aracteristics 30 ZA.2 Procedures for AVCP of factory made calcium silicate (CS) 32 ZA.3 CE Marking and labelling . 39 Bibliography . 41 BS EN 14306:2015EN 14306:2015 (E) 4 European foreword This document (EN 14306:2015) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials
21、 and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by September
22、 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14306:2009+A1:2013. This document is identifying th
23、ose clauses of the standard which are needed for the compliance of the European Standard with the Construction Products Regulation (CPR). The main technical changes that have been made in this new edition of EN 14306 are the following: a) an addition to the foreword; b) an addition in Clause 3.2.2;
24、c) a new Clause 4.3.8; d) modification of Clause 5.3.2; e) modification of Clause 7; f) modification of Clause 8; g) modification of Annex A; h) deletion of Annex B (normative) Testing for reaction to fire; i) a new Annex ZA. This document has been prepared under a mandate given to CEN by the Europe
25、an Commission and the European Free Trade Association, and supports essential requirements of Regulation (EU) No. 305/2011. For relationship with Regulation (EU) No. 305/2011, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting entiti
26、es, who are bound by EU Directives to specify their requirements using European harmonized product standards, are allowed to demand additional properties outside the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipment or
27、 the industrial installation projected or because of safety regulations. This European Standard contains six annexes: Annex A (normative), Factory production control; Annex B (normative), Determination of minimum service temperature; Annex C (informative), Preparation of the test specimens to measur
28、e thermal conductivity; BS EN 14306:2015EN 14306:2015 (E) 5 Annex D (informative), Additional properties ; Annex ZA (informative), Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation. This document includes a bibliography. This European Standard is
29、one of a series of standards for insulation products used in building equipment and industrial installations, but this standard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European pack
30、age of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict with the European standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal ins
31、ulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations
32、 Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification EN 14306, Thermal insulation products for building equipment and industrial installat
33、ions Factory made calcium silicate (CS) products Specification EN 14307, Thermal insulation products for building equipment and industrial installations Factory made extruded polystyrene foam (XPS) products Specification EN 14308, Thermal insulation products for building equipment and industrial ins
34、tallations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation produc
35、ts for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification EN 15501, Thermal insulation products fo
36、r building equipment and industrial installations Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products Specification According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard
37、: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
38、 Sweden, Switzerland, Turkey and the United Kingdom. BS EN 14306:2015EN 14306:2015 (E) 6 1 Scope This European Standard specifies the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating
39、 temperature range of approximately - 170 C to + 1 100 C. Calcium silicate products can be used below - 50 C. Below the operating temperature of - 50 C, special tests, regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers advice
40、 should be heeded in all cases. The products are manufactured in the form of boards, pipe sections, segments and prefabricated ware. This European Standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this
41、 standard are also used in prefabricated thermal insulation systems and composite panels; the structural performance of systems incorporating these products is not covered. This European Standard does not specify the required level or class of a given property that should be achieved by a product to
42、 demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,6 W/(mK) at 10 C are not covered by this standard. This European Standard does
43、 not cover products intended to be used for the insulation of the building structure. This European Standard does not cover the following acoustical aspects: direct airborne sound insulation and impact noise transmission index. 2 Normative references The following documents, in whole or in part, are
44、 normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applica
45、tions - Determination of length and width EN 823, Thermal insulating products for building applications - Determination of thickness EN 824, Thermal insulating products for building applications - Determination of squareness EN 825, Thermal insulating products for building applications - Determinati
46、on of flatness EN 826, Thermal insulating products for building applications - Determination of compression behaviour EN 1094-6, Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified) EN 1604, Thermal insulating
47、 products for building applications - Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications - Determination of short term water absorption by partial immersion EN 12085, Thermal insulating products fo
48、r building applications - Determination of linear dimensions of test specimens BS EN 14306:2015EN 14306:2015 (E) 7 EN 12086, Thermal insulating products for building applications - Determination of water vapour transmission properties EN 12667, Thermal performance of building materials and products
49、- Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance EN 12939, Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance EN 13172, Thermal insulation products - Evaluation of conformity EN 13467, Thermal insulating products for building equipment and industrial installations
