1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Fixed firefighting systems Gas extinguishing systemsPart 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified)BS EN 150048:2017National forewordThis
2、 British Standard is the UK implementation of EN 150048:2017. It is derived from ISO 14520-13:2015. It supersedes BS EN 150048:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee FSH/18/6, Gaseous Extinguishing Media and Systems.A list of organizatio
3、ns represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN
4、978 0 580 93872 6ICS 13.220.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRI
5、TISH STANDARDBS EN 150048:2017EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 150048December 2017ICS 13.220.20 Supersedes EN 150048:2008EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
6、 2017 CEN Ref. No. EN 150048:2017: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersFixed firefighting systems Gas extinguishing systems Part 8: Physical properties and system design of gas extinguishing systems for IG100 extinguishant (ISO 14520-13
7、:2015, modified)Installations fixes de lutte contre lincendie - Installations dextinction gaz - Partie 8 : Proprits physiques et conception des systmes pour agent extincteur IG-100 (ISO 14520-13:2015, modifie)Ortsfeste Brandbekmpfungsanlagen Lschanlagen mit gasfrmigen Lschmitteln Teil 8: Physikalisc
8、he Eigenschaften und Anlagenauslegung fr Lschmittel IG-100 (ISO 14520-13:2015, modifiziert)This European Standard was approved by CEN on 25 September 2017.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st
9、atus of a national standard without any alteration. Uptodate lists and bibliographical references concerning such national standards may be obtained on application to the CENCENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, Germ
10、an). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,
11、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a
12、nd United Kingdom.English VersionEN 15004-8:2017 (E)European forewordThis document (EN 15004-8:2017) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, eith
13、er by publication of an identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be withdrawn at the latest by June 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not b
14、e held responsible for identifying any or all such patent rights.This document supersedes EN 150048:2008.The text of the International Standard ISO 1452013:2015 from Technical Committee ISO/TC 21 “Equipment for fire protection and firefighting” of the International Organization for Standardization (
15、ISO) has been taken over as a European Standard by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI, with common modifications which are indicated by a straight line in the margin of the text.This European Standard will consist of the following par
16、ts, under the general title Fixed firefighting systems Gas extinguishing systems: Part 1: Design, installation and maintenance; Part 2: Physical properties and system design of gas extinguishing systems for FK5112 extinguishant; Part 3: Physical properties and system design of gas extinguishing syst
17、ems for HCFC Blend A extinguishant; Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant; Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant; Part 6: Physical properties and system design of gas extin
18、guishing systems for HFC 23 extinguishant; Part 7: Physical properties and system design of gas extinguishing systems for IG01 extinguishant; Part 8: Physical properties and system design of gas extinguishing systems for IG100 extinguishant; Part 9: Physical properties and system design of gas extin
19、guishing systems for IG55 extinguishant; Part 10: Physical properties and system design of gas extinguishing systems for IG541 extinguishant.The International Standards ISO 145202 and ISO 1452011, which dealt with CF3I and HFC 236fa extinguishants, respectively, have not been implemented by CEN, as
20、CF3I is only valid for local application and HFC 236fa extinguishant is only applicable for portable fire extinguishers and local application, respectively, which is not covered by the scope.According to the CENCENELEC Internal Regulations, the national standards organisations of the following count
21、ries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol
22、and, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.2BS EN 150048:2017EN 15004-8:2017 (E)European foreword 2European foreword 41 Scope . 52 Normative references 53 Terms and definitions . 54 Characteristics and uses . 54.1 General . 54.2 Use
23、of IG100 systems . 65 Safety of personnel . 96 System design 96.1 Fill pressure . 96.2 Superpressurization 106.3 Extinguishant quantity 107 Environmental Properties .113Contents PageBS EN 150048:2017EN 15004-8:2017 (E)European forewordThis document (EN 15004-8:2017) has been prepared by Technical Co
24、mmittee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be with
25、drawn at the latest by June 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes EN 150048:2008.The text of the International
26、 Standard ISO 1452013:2015 from Technical Committee ISO/TC 21 “Equipment for fire protection and firefighting” of the International Organization for Standardization (ISO) has been taken over as a European Standard by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of whi
27、ch is held by BSI, with common modifications which are indicated by a straight line in the margin of the text.This European Standard will consist of the following parts, under the general title Fixed firefighting systems Gas extinguishing systems: Part 1: Design, installation and maintenance; Part 2
28、: Physical properties and system design of gas extinguishing systems for FK5112 extinguishant; Part 3: Physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant; Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguisha
29、nt; Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant; Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant; Part 7: Physical properties and system design of gas extinguishing systems for IG01 extingu
30、ishant; Part 8: Physical properties and system design of gas extinguishing systems for IG100 extinguishant; Part 9: Physical properties and system design of gas extinguishing systems for IG55 extinguishant; Part 10: Physical properties and system design of gas extinguishing systems for IG541 extingu
31、ishant.The International Standards ISO 145202 and ISO 1452011, which dealt with CF3I and HFC 236fa extinguishants, respectively, have not been implemented by CEN, as CF3I is only valid for local application and HFC 236fa extinguishant is only applicable for portable fire extinguishers and local appl
32、ication, respectively, which is not covered by the scope.According to the CENCENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin
33、land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.4BS EN 150048:2017EN 150
34、04-8:2017 (E)1 Scope1.1 This document specifies requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant. It includes details of physical properties, specification, usage and safety aspects.1.2 This document is applicable for systems operating at nominal pressure
35、s of 200 bar at 15 C and 300 bar at 15 C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for
36、 its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN 150041:2017, Fixed firefighting systems Gas extinguishing systems Part 1: Design, installation and maintenance3 Terms an
37、d definitionsFor the purposes of this document, the terms and definitions given in EN 15004-1 apply.4 Characteristics and uses4.1 GeneralExtinguishant IG-100 shall comply with the specification shown in Table 1.IG100 is a colourless, odourless, electrically nonconductive gas with a density approxima
38、tely the same as that of air.The physical properties are shown in Table 2.IG-100 extinguishes fires mainly by a reduction of oxygen concentration in the atmosphere of the hazard enclosure.Table 1 Specification for IG-100Property RequirementPurity 99,6 % by volume, min.Moisture 50 parts per million b
39、y mass, max.Oxygen 0,1 % by volume, max.NOTE Only principal contaminants are shown. Other measurements may include hydrocarbons, CO, NO, NO2, CO2, etc. Most are 20 106.Table 2 Physical properties of IG-100Property Units ValueMolecular mass 28,02Boiling point at 1,013 bar (absolute) C 195,8Freezing p
40、oint C 210,0Critical temperature C Critical pressure bar abs 5BS EN 150048:2017EN 15004-8:2017 (E)Property Units ValueCritical volume cm3/mol Critical density kg/m3Vapour pressure 20 C bar abs Liquid density 20 C kg/m3Saturated vapour density 20 C kg/m3Specific volume of superheated vapour at 1,013
41、bar and 20 Cm3/kg 0,858Chemical formula N2NitrogenChemical name4.2 Use of IG-100 systemsIG-100 total flooding systems may be used for extinguishing fires of all classes within the limits specified in EN 15004-1:2017, Clause 4.The extinguishant requirements per volume of protected space are shown in
42、Table 3 for various levels of concentration. These are based on methods shown in EN 150041:2017, 7.6.The extinguishing concentrations and design concentrations for heptane and surface class A hazards are shown in Table 4.Table 3 IG-100 total flooding quantityTemperatureT CSpecific vapour volumeS Amo
43、unt of IG-100 per unit volume of protected spaceV/V (m3/m3)Design concentration(by volume)m3/kg 34 % 38 % 42 % 46 % 50 % 54 % 58 % 62 %40 0,682 5 0,522 0,601 0,685 0,775 0,872 0,976 1,091 1,21735 0,697 1 0,511 0,588 0,671 0,758 0,853 0,956 1,068 1,19130 0,711 8 0,501 0,576 0,657 0,743 0,836 0,936 1,
44、046 1,16725 0,726 4 0,491 0,565 0,644 0,728 0,819 0,917 1,025 1,14320 0,741 1 0,481 0,554 0,631 0,714 0,803 0,899 1,005 1,12015 0,755 7 0,472 0,543 0,619 0,700 0,787 0,882 0,985 1,09910 0,770 4 0,463 0,533 0,607 0,686 0,772 0,865 0,966 1,0785 0,785 0 0,454 0,523 0,596 0,674 0,758 0,849 0,948 1,0580
45、0,799 7 0,446 0,513 0,585 0,661 0,744 0,833 0,931 1,0385 0,814 3 0,438 0,504 0,574 0,649 0,731 0,818 0,914 1,02010 0,829 0 0,430 0,495 0,564 0,638 0,718 0,804 0,898 1,00215 0,843 6 0,423 0,486 0,554 0,627 0,705 0,790 0,883 0,98420 0,858 3 0,416 0,478 0,545 0,616 0,693 0,777 0,868 0,96825 0,872 9 0,4
46、09 0,470 0,536 0,606 0,682 0,764 0,853 0,95130 0,887 6 0,402 0,462 0,527 0,596 0,670 0,751 0,839 0,93635 0,902 2 0,395 0,455 0,518 0,586 0,659 0,739 0,825 0,92040 0,916 9 0,389 0,448 0,510 0,577 0,649 0,727 0,812 0,90645 0,931 5 0,383 0,440 0,502 0,568 0,639 0,716 0,799 0,8926 BS EN 150048:2017EN 15
47、004-8:2017 (E)TemperatureT CSpecific vapour volumeS Amount of IG-100 per unit volume of protected spaceV/V (m3/m3)Design concentration(by volume)m3/kg 34 % 38 % 42 % 46 % 50 % 54 % 58 % 62 %50 0,946 2 0,377 0,434 0,494 0,559 0,629 0,704 0,787 0,87855 0,960 8 0,371 0,427 0,487 0,550 0,619 0,694 0,775
48、 0,86460 0,975 5 0,366 0,421 0,479 0,542 0,610 0,683 0,763 0,85165 0,990 1 0,360 0,414 0,472 0,534 0,601 0,673 0,752 0,83970 1,004 8 0,355 0,408 0,465 0,526 0,592 0,663 0,741 0,82775 1,019 4 0,350 0,403 0,459 0,519 0,584 0,654 0,730 0,81580 1,034 1 0,345 0,397 0,452 0,511 0,575 0,645 0,720 0,80385 1
49、,048 7 0,340 0,391 0,446 0,504 0,567 0,636 0,710 0,7927BS EN 150048:2017EN 15004-8:2017 (E)TemperatureT CSpecific vapour volumeS Amount of IG-100 per unit volume of protected spaceV/V (m3/m3)Design concentration(by volume)m3/kg 34 % 38 % 42 % 46 % 50 % 54 % 58 % 62 %90 1,063 4 0,335 0,386 0,440 0,497 0,560 0,627 0,700 0,78195 1,078 0 0,331 0,381 0,434 0,491 0,552 0,618 0,691 0,770100 1,092 7 0,326 0,376 0,428 0,484 0,545 0,610 0,682 0,760NOTE This
