1、BRITISH STANDARDBS EN 15316-4-2:2008Heating systems in buildings Method for calculation of system energy requirements and system efficiencies Part 4-2: Space heating generation systems, heat pump systemsICS 91.140.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g
2、54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 15316-4-2:2008This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 August 2008 BSI 2008ISBN 978 0 580 59468 7National fore
3、wordThis British Standard is the UK implementation of EN 15316-4-2:2008.The UK participation in its preparation was entrusted to Technical Committee RHE/24, Central heating installations.A list of organizations represented on this committee can be obtained on request to its secretary. BSI, as the UK
4、 member of CEN, is obliged to publish EN 15316-4-2:2008 as a British Standard. However, attention is drawn to the fact that during the development of this European Standard, the UK voted against its approval as a European Standard The UK voted against this standard on the grounds that it was conside
5、red disproportionate to the essential requirements of the EU Energy Performance of Buildings Directive (2002/91/EC), which it supports. In the opinion of the UK committee, EN 15316-4-2:2008 is regarded as unsuitable for existing buildings where the data required are unlikely to be available. This pu
6、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publicationDate CommentsEUROPEAN STANDARDNORME EUR
7、OPENNEEUROPISCHE NORMEN 15316-4-2June 2008ICS 91.140.10English VersionHeating systems in buildings - Method for calculation of systemenergy requirements and system efficiencies - Part 4-2: Spaceheating generation systems, heat pump systemsSystmes de chauffage dans les btiments - Mthode decalcul des
8、besoins nergtiques et des rendements dessystmes - Partie 4-2 : Systmes de gnration dechauffage des locaux, systmes de pompes chaleurHeizungsanlagen in Gebuden - Verfahren zur Berechnungder Energieanforderungen und Nutzungsgrade der Anlagen- Teil 4-2: Wrmeerzeugung fr die Raumheizung,Wrmepumpensystem
9、eThis European Standard was approved by CEN on 15 May 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical referenc
10、es concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into i
11、ts own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lith
12、uania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN
13、 All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15316-4-2:2008: EEN 15316-4-2:2008 (E) 2 Contents page Foreword4 Introduction.6 1 Scope 6 2 Normative references 7 3 Terms, definitions, symbols and units 8 3.1 Terms and definitions .8 3.
14、2 Symbols and units.13 4 Principle of the method.15 4.1 Heat balance of generation subsystem.15 4.2 Energy input needed to meet the heat requirements 18 4.3 Auxiliary energy WHW,gen,aux.19 4.4 Recoverable, recovered and unrecoverable heat losses 19 4.5 Calculation periods .19 4.6 Calculation by zone
15、s .19 4.7 Heat pumps with combined space heating and domestic hot water production .20 5 Generation subsystem calculation 22 5.1 General22 5.2 Simplified seasonal performance method based on system typology (system typology method).22 5.2.1 Principle of the system typology method .22 5.2.2 Calculati
16、on procedure of the system typology method 23 5.3 Detailed case specific seasonal performance method based on component efficiency (bin-method).24 5.3.1 Principle of the bin method 24 5.3.2 Input data for the calculation with the bin method 28 5.3.3 Calculation steps to be performed in the bin metho
17、d .29 5.3.4 Heat energy requirements for space heating and domestic hot water mode for the bins 33 5.3.5 Heating capacity and COP at full load.34 5.3.6 COP at part load operation .38 5.3.7 Thermal losses through the generator envelope .39 5.3.8 Calculation of back-up heater 40 5.3.9 Running time of
18、the heat pump48 5.3.10 Auxiliary energy.55 5.3.11 Total thermal losses and recoverable thermal loss of the generation subsystem.56 5.3.12 Calculation of total energy input58 5.3.13 Summary of output values63 Annex A (informative) Example of evaluation of meteorological data.64 Annex B (informative)
19、Default values of parameters for the case specific seasonal performance method69 B.1 Controller setting of flow temperature (heating characteristic curve).69 B.2 Temperature correction factor for domestic hot water storage loading .70 B.3 Average water temperature of domestic hot water storages70 B.
20、4 Generator envelope .70 B.5 Generation subsystem auxiliaries .71 B.6 Factor fcombifor simultaneous operation .71 B.7 Temperature reduction factor linked to location71 B.8 Efficiency value of the electrical back-up heater for space heating or DHW operation 72 BS EN 15316-4-2:2008EN 15316-4-2:2008 (E
21、) 3 Annex C (informative) Calculation method for source and sink temperature correction with fixed exergetic efficiency73 Annex D (informative) Calculation example .77 D.1 Detailed calculation example .77 D.1.1 System configuration77 D.1.2 Input data for the calculation (according to 5.3.2) .77 D.1.
22、3 Calculation .80 D.2 Calculation example (spreadsheet format).99 D.2.1 System configuration99 D.2.2 Input data for the calculation (according to 5.3.2) .99 D.2.3 Calculation .100 Annex E (informative) Example for tabulated values of the system typology method as national annex for the Netherlands 1
23、04 E.1 General .104 E.2 Scope104 E.3 References .104 E.4 Heat pump seasonal performance.104 E.4.1 Residential buildings 104 E.4.2 Non-residential buildings .105 E.5 Heat pump installation efficiency 106 E.6 Heat pump installation energy consumption .108 E.7 Heat pump installation auxiliary energy co
24、nsumption108 Annex F (informative) Example values for parameters to accomplish the case specific heat pump calculation method (bin method)109 F.1 General .109 F.2 Temperatures.109 F.2.1 Source temperatures.109 F.3 Example values for heating capacity and coefficient of performance for electrically dr
25、iven heat pumps.111 F.3.1 General .111 F.3.2 Heating capacity111 F.3.3 COP.114 F.4 Gas engine-driven heat pumps116 F.4.1 Preface116 F.4.2 Heating capacity117 F.4.3 COP.119 F.5 Absorption heat pumps 121 F.5.1 General .121 F.5.2 NH3/H20 heat pumps outside air-to-water 122 F.5.3 NH3/H20 heat pumps brin
26、e-to-water123 F.5.4 NH3/H20 heat pumps water-to-water .124 F.5.5 H20/LiBr double effect heat pumps125 F.6 Heat pumps with domestic hot water production (DHW) - Heating capacity of domestic hot water heat pumps .126 Bibliography127 BS EN 15316-4-2:2008EN 15316-4-2:2008 (E) 4 Foreword This document (E
27、N 15316-4-2:2008) has been prepared by Technical Committee CEN/TC 228 “Heating systems in buildings”, the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Decemb
28、er 2008, and conflicting national standards shall be withdrawn at the latest by December 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent
29、 rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/343), and supports essential requirements of EU Directive 2002/91/EC on the energy performance of buildings (EPBD). It forms part of a series of standar
30、ds aimed at European harmonisation of the methodology for calculation of the energy performance of buildings. An overview of the whole set of standards is given in CEN/TR 15615 13. The subjects covered by CEN/TC 228 are the following: design of heating systems (water based, electrical, etc.); instal
31、lation of heating systems; commissioning of heating systems; instructions for operation, maintenance and use of heating systems; methods for calculation of the design heat loss and heat loads; methods for calculation of the energy performance of heating systems. Heating systems also include the effe
32、ct of attached systems such as hot water production systems. All these standards are systems standards, i.e. they are based on requirements addressed to the system as a whole and not dealing with requirements to the products within the system. Where possible, reference is made to other European or I
33、nternational Standards, a.o. product standards. However, use of products complying with relevant product standards is no guarantee of compliance with the system requirements. The requirements are mainly expressed as functional requirements, i.e. requirements dealing with the function of the system a
34、nd not specifying shape, material, dimensions or the like. The guidelines describe ways to meet the requirements, but other ways to fulfil the functional requirements might be used if fulfilment can be proved. Heating systems differ among the member countries due to climate, traditions and national
35、regulations. In some cases requirements are given as classes so national or individual needs may be accommodated. In cases where the standards contradict with national regulations, the latter should be followed. BS EN 15316-4-2:2008EN 15316-4-2:2008 (E) 5 EN 15316 Heating systems in buildings Method
36、 for calculation of system energy requirements and system efficiencies consists of the following parts: Part 1: General Part 2-1: Space heating emission systems Part 2-3: Space heating distribution systems Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements) Part 3-
37、2: Domestic hot water systems, distribution Part 3-3: Domestic hot water systems, generation Part 4-1: Space heating generation systems, combustion systems (boilers) Part 4-2: Space heating generation systems, heat pump systems Part 4-3: Heat generation systems, thermal solar systems Part 4-4: Heat
38、generation systems, building-integrated cogeneration systems Part 4-5: Space heating generation systems, the performance and quality of district heating and large volume systems Part 4-6: Heat generation systems, photovoltaic systems Part 4-7: Space heating generation systems, biomass combustion sys
39、tems According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, It
40、aly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. BS EN 15316-4-2:2008EN 15316-4-2:2008 (E) 6 Introduction This European Standard is part of a series of standards on the methods for calculatio
41、n of system energy requirements and system efficiencies. The framework for the calculation is described in the general part (EN 15316-1 9). The energy performance can be assessed by determining either the heat generation sub-system efficiencies or the heat generation sub-system losses due to the sys
42、tem configuration. This European Standard presents methods for calculation of the additional energy requirements of a heat generation sub-system in order to meet the distribution sub-system demand. The calculation is based on the performance characteristics of the products given in product standards
43、 and on other characteristics required to evaluate the performance of the products as included in the system. Product data, e.g. heating capacity or COP of the heat pump, shall be determined according to European test methods. If no European methods exist, national methods can be used. This method c
44、an be used for the following applications: judging compliance with regulations expressed in terms of energy targets; optimisation of the energy performance of a planned heat generation sub-system, by applying the method to several possible options; assessing the effect of possible energy conservatio
45、n measures on an existing heat generation sub-system, by calculating of the energy use with and without the energy conservation measure. Only the calculation method is normative. The user shall refer to other European Standards or to national documents for input data. Additional values necessary to
46、complete the calculations are to be given in a national annex, if no national annex is available, default values are given in an informative annex where appropriate. 1 Scope This European Standard covers heat pumps for space heating, heat pump water heaters (HPWH) and heat pumps with combined space
47、heating and domestic hot water production in alternate or simultaneous operation, where the same heat pump delivers the heat to cover the space heating and domestic hot water heat requirement. The scope of this part is to standardise the: required inputs, calculation methods, resulting outputs, for
48、heat generation by the following heat pump systems, including control, for space heating and domestic hot water production: electrically-driven vapour compression cycle (VCC) heat pumps, combustion engine-driven vapour compression cycle heat pumps, BS EN 15316-4-2:2008EN 15316-4-2:2008 (E) 7 thermal
49、ly-driven vapour absorption cycle (VAC) heat pumps, using combinations of heat source and heat distribution as listed in Table 1. Table 1 Heat sources and heat distribution in the scope of this European Standard Heat source Heat distribution Outdoor air Air Exhaust-air WaterIndirect ground source with brine distribution Indirect ground source with water distribution Direct condensation of the refrigerant in the appliance (VRF) Direct ground source (Direct expansion (DX) Surface water Ground water 2 Normative references
