1、BSI Standards PublicationBS EN 16430-1:2014Fan assisted radiators,convectors and trenchconvectorsPart 1: Technical specifications andrequirementsBS EN 16430-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16430-1:2014. The UK participation in its preparat
2、ion was entrusted to TechnicalCommittee RHE/6, Air or space heaters or coolers without combustion.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respo
3、nsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 77213 9ICS 91.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standar
4、ds Policy and Strategy Committee on 31 December 2014.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16430-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16430-1 December 2014 ICS 91.140.10 English Version Fan assisted radiators, convectors and trench conv
5、ectors - Part 1: Technical specifications and requirements Radiateurs assists par ventilateur, convecteurs et convecteurs de caniveaux - Partie 1 : Spcifications techniques et exigences Geblseuntersttzte Heizkrper, Konvektoren und Unterflurkonvektoren - Teil 1: Technische Spezifikationen und Anforde
6、rungen This European Standard was approved by CEN on 9 November 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographi
7、cal references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
8、 of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of
9、Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION
10、 EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16430-1:2014 EBS EN 16430-1:2014EN 16430-1:2014 (E) 2 Contents Page Foreword 3 1
11、Scope 4 2 Normative references 4 3 Terms and definitions .5 4 Pretreatment and coating .5 5 Dimensional tolerances and pressure tightness 5 5.1 General 5 5.2 Material specification and wall thickness of wet heating surfaces 6 5.2.1 General 6 5.2.2 Finned tube convectors 6 5.2.3 Other materials .6 5.
12、3 Leak testing 6 5.4 Pressure strength testing .6 5.5 Surface defects 7 6 Electrical and mechanical safety for fan assisted radiators .7 7 Noise emission .7 8 Thermal outputs and cooling capacity 7 8.1 Test method and laboratory .7 8.1.1 Thermal outputs .7 8.1.2 Cooling capacity 8 8.2 Aim of the tes
13、t programme .8 8.3 Test data .8 8.4 Test report 8 9 Catalogue data .9 9.1 General 9 9.2 Identification code of the heating appliance .9 9.3 Thermal output .9 9.4 Cooling capacity 9 9.5 Noise emission 10 9.6 Dimensions 10 9.6.1 Radiators . 10 9.6.2 Convectors 10 9.6.3 Fan assisted radiators and conve
14、ctors 11 9.6.4 Ventilation radiators and convectors . 11 9.7 Maximum operating pressure 11 9.8 Maximum operating temperature 11 9.9 Electrical connections 11 9.10 Catalogue reference data . 12 10 Marking and labelling . 12 BS EN 16430-1:2014EN 16430-1:2014 (E) 3 Foreword This document (EN 16430-1:20
15、14) has been prepared by Technical Committee CEN/TC 130 “Space heating appliances without integral heat sources”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lat
16、est by June 2015 and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pa
17、tent rights. The European Standard “Fan assisted radiators, convectors and trench convectors“ consists of the following parts: - Part 1: Technical specifications and requirements - Part 2: Test method and rating for thermal output - Part 3: Test method and rating for cooling capacity According to th
18、e CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, H
19、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16430-1:2014EN 16430-1:2014 (E) 4 1 Scope This European Standard defines the technical specifica
20、tions and requirements of fan assisted radiators, convectors and trench convectors for permanent installation in central heating systems which are factory assembled or kits. This European Standard covers fan assisted radiators and convectors fed with water at temperatures below 120 C, supplied by a
21、remote heating source. This European Standard also applies for radiators and convectors according to EN 442-1 to determine their dry cooling capacity. This European Standard does not apply to discrete heating appliances. This European Standard also defines the additional common data that the manufac
22、turer is to provide to the trade in order to ensure the correct application of the products. This European Standard applies to the testing for the determination of thermal output and dry cooling capacity of fan assisted radiators and convectors, provided the heater/cooler has a dedicated fan or fans
23、; trench convectors with and without fan(s), provided the fan(s) are dedicated; ventilation radiators and convectors (only heating); not fan assisted radiators and convectors (only cooling). 2 Normative references The following documents, in whole or in part, are normatively referenced in this docum
24、ent and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 442-1, Radiators and convectors Part 1: Technical specifications and requirements EN 442-2
25、, Radiators and convectors Part 2: Test methods and rating EN 16430-2, Fan assisted radiators, convectors and trench convectors Part 2: Test method and rating for thermal output EN 16430-3, Fan assisted radiators, convectors and trench convectors Part 3: Test method and rating for cooling capacity E
26、N 60335-2-80, Household and similar electrical appliances Safety Part 2-80: Particular requirements for fans EN ISO 2409:2013, Paints and varnishes Cross-cut test (ISO 2409:2013) EN ISO 3741, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure
27、Precision methods for reverberation test rooms (ISO 3741) BS EN 16430-1:2014EN 16430-1:2014 (E) 5 EN ISO 3743-1, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Com
28、parison method for a hard-walled test room (ISO 3743-1) EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744) EN ISO 3745, Acoustics Determination o
29、f sound power levels and sound energy levels of noise sources using sound pressure Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745) EN ISO 9614-1, Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points (ISO 9
30、614-1) EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2) EN ISO 12499, Industrial fans Mechanical safety of fans Guarding (ISO 12499) EN ISO/IEC 17025, General requirements for the competence of testing an
31、d calibration laboratories (ISO/IEC 17025) IEC 62301, Household electrical appliances Measurement of standby power 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 442-2, EN 16430-2 and EN 16430-3 apply. 4 Pretreatment and coating The pretreatment, pai
32、nt processes and other surface finishing (chrome, polish etc.) used, shall provide a protective coating to all external surfaces in contact with the air which shall as a minimum requirement: give protection against corrosion in normal storage and installation conditions, as demonstrated by absence o
33、f surface corrosion after 100 h humidity test according to EN 442-2; for paint only, be resistant to minor impact damage according to EN ISO 2409. The test result shall be within the first three steps (0-1-2) of EN ISO 2409:2013, Table 1. The surface treatments shall not contain any chemical substan
34、ces whose use is prohibited in building products1. The compliance shall be declared by the manufacturer of the radiator/convector. 5 Dimensional tolerances and pressure tightness 5.1 General The dimensional tolerances shall not be greater than those in the manufacturers drawings. In any case they sh
35、all not be greater than those given in EN 442-2. For trench convectors the dimensional tolerances of finned tube convectors apply. The dimensional tolerance of the trench shall not be greater than those given in Table 1. 1Also in relation to Regulation (EC) No 1907/2006 (REACH) BS EN 16430-1:2014EN
36、16430-1:2014 (E) 6 Table 1 Additional dimensional tolerances of the trench convectors Dimensional tolerances dimensions in millimetres trench (width WTand height HT) 5 distances convector to trench (fins to wall DFWand fins to bottom DFB) 5 For fan assisted radiators and convectors the location of t
37、he fans shall be to the specifications of the manufacturers technical drawings within a tolerance of 10 mm. The manufacturer shall implement a quality control system to ensure that products comply with the tolerances. 5.2 Material specification and wall thickness of wet heating surfaces 5.2.1 Genera
38、l The requirements of EN 442-1 for material and wall thickness for steel, cast-iron, cast aluminium or extruded aluminium radiators shall be fulfilled. Compliance with this requirement shall be verified by measurement. 5.2.2 Finned tube convectors The wall thickness for the steel tubes in the finish
39、ed product shall not be less than 0,8 mm. The wall thickness for copper tubes in the finished product shall not be less than 0,25 mm. For other materials 5.2.3 applies. Compliance with this requirement shall be verified by measurement. 5.2.3 Other materials Materials (grade and thickness) other than
40、 those specified in EN 442-1 may be used provided that they have been demonstrated by appropriate tests and/or data to: meet the requirements of 5.3 and 5.4; ensure at least equivalent performance in terms of reaction to fire, strength and stability of the product. Compliance with this requirement s
41、hall be verified by measurement. 5.3 Leak testing Before leaving the manufacturers all heating appliances shall be tested for leaks to a test pressure equal to at least 1,3 times the quoted maximum operating pressure. The test pressure shall not be less than 520 kPa. 5.4 Pressure strength testing Sa
42、mple heating appliances shall be subjected to a burst test at a pressure 1,3 times the leak testing pressure, as specified in 5.3. BS EN 16430-1:2014EN 16430-1:2014 (E) 7 The sample under test may deform but shall not rupture; The sample radiators/convectors shall not be less than 500 mm long. They
43、shall not be sold after testing. 5.5 Surface defects The heating appliance shall be free from burrs likely to cause handling injuries. 6 Electrical and mechanical safety for fan assisted radiators The electrical components and the fan shall meet the requirements for electrical and mechanical safety.
44、 Electrical components of the fan assisted radiators shall comply with EN 60335-2-80. The fan shall comply with EN ISO 12499 for mechanical safety. 7 Noise emission The noise emission (sound power) shall be measured according to one of the following standards: EN ISO 3741; EN ISO 3745; EN ISO 3743-1
45、; EN ISO 3744; EN ISO 9614-1; EN ISO 9614-2. A measurement according to class 2 is sufficient. The sound power shall be measured for the fixed rotation speed of the fan respectively for the highest, the lowest and the nominal speed in case of continuous or multi stage variable fan speeds. In additio
46、n to the sound power level, the manufacturer may specify the sound pressure level with a room absorption of 8 dB (A). This corresponds to a distance of 2 m from the sample, a room volume of 100 m and a reverberation time of 0,5 s. 8 Thermal outputs and cooling capacity 8.1 Test method and laboratory
47、 8.1.1 Thermal outputs The thermal outputs shall be determined with the method and test programme specified by EN 16430-2 in a laboratory, also taking into account the laboratory specific requirements and harmonization methods as specified by EN 442-2. BS EN 16430-1:2014EN 16430-1:2014 (E) 8 8.1.2 C
48、ooling capacity The cooling capacity shall be determined with the method and test programme specified by EN 16430-3 in a laboratory, also taking into account the laboratory specific requirements as specified by EN 442-2. 8.2 Aim of the test programme The aim of the test programme is to determine: th
49、e standard thermal outputs and/or standard cooling capacity for comparison of different products under manufacturer defined nominal conditions (e.g. primary air flow rate, acoustical power, fan speed); the thermal output and/or cooling capacity under variable operating conditions (e.g. water temperatures, fan speed, primary air flow rate, acoustical power etc.) to provide standardized technical data for the design of heating systems with or without a cooling function. 8.3 Test data The
