1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Performance standardPart 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM
2、 devices for category O Uncontrolled environmentBS EN 61753-087-6:2012National forewordThis British Standard is the UK implementation of EN 61753-087-6:2012. It isidentical to IEC 61753-087-6:2012.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Su
3、bcommittee GEL/86/2, Fibre optic interconnectingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correc
4、t application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 71349 1ICS 33.180.20 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy
5、Committee on 31 May 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-087-6:2012EUROPEAN STANDARD EN 61753-087-6 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Elec
6、trotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-087-6:2012 E ICS 33.180.20 English version Fibre optic
7、 interconnecting devices and passive components - Performance standard - Part 087-6: Non-connectorised single-mode bidirectional 1310 nm upstream and 1490 nm downstream WWDM devices for category O - Uncontrolled environment (IEC 61753-087-6:2012) Dispositifs dinterconnexion et composants passifs fib
8、res optiques - Norme de performance - Partie 087-6 : Dispositifs WWDM unimodaux non connectoriss bidirectionnels 1 310 nm en voie montante et 1 490 nm en voie descendante pour la catgorie O - Environnement non contrlLichtwellenleiter -Verbindungselemente und passive Bauteile - Betriebsverhalten - Te
9、il 087-6: Nicht mit Steckverbindern versehene bidirektionale 1310-nm-upstream- und 1490-nm-downstream-Einmoden-WWDM-Bauteile fr die Kategorie O - Unkontrollierte Umgebung (IEC 61753-087-6:2012) This European Standard was approved by CENELEC on 2012-03-27. CENELEC members are bound to comply with the
10、 CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management
11、 Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same
12、status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherland
13、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-087-6:2012EN 61753-087-6:2012 - 2 - Foreword The text of document 86B/3256/CDV, future edition 1 of IEC 61753-087-6, prepared by SC 86B, “Fibre optic interconnecting devic
14、es and passive components“, of IEC/TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-087-6:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national sta
15、ndard or by endorsement (dop) 2012-12-27 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-03-27 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not
16、be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-087-6:2012 was approved by CENELEC as a European Standard without any modification. BS EN 61753-087-6:2012- 3 - EN 61753-087-6:2012 Annex ZA (normative) Normative re
17、ferences to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the
18、 latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product spec
19、ifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting
20、 devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-9
21、 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handli
22、ng and damage threshold characterization EN 61300-2-14 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive
23、components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 6
24、1300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - BS EN 61753-087-6:2012EN 61753-087-6:2012 - 4 - Publication Year Title EN/HD Year IEC 61300-2-48 - F
25、ibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinati
26、ons and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-
27、7 (mod) - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices
28、and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61753-1 - Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for pe
29、rformance standards EN 61753-1 - IEC 62074-1 - Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - BS EN 61753-087-6:2012 2 61753-087-6 IEC:2012(E) CONTENTS 1 Scope . 5 2 Normative references . 5 3 Test 6 4 Test report 6 5
30、 Performance requirements . 6 5.1 Reference components 6 5.2 Dimensions . 7 5.3 Sample size, sequencing and grouping . 7 5.4 Test Details and Requirements 7 Annex A (normative) Sample size, sequencing and grouping . 12 Annex B (informative) General information for 1 310 nm upstream and 1 490 nm down
31、stream PON WWDM device 13 Bibliography 14 Figure B.1 Example for 1490 nm downstream and 1310 nm upstream WWDM at central office and customer side . 13 Table 1 Test details and requirements . 7 Table A.1 Sample size and sequencing of tests . 12 BS EN 61753-087-6:201261753-087-6 IEC:2012(E) 5 FIBRE OP
32、TIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 087-6: Non-connectorised single-mode bidirectional 1 310 nm upstream and 1 490 nm downstream WWDM devices for category O Uncontrolled environment 1 Scope This part of IEC 61753 contains the minimum initial performance, test
33、 and measurement requirements and severities which a fibre optic pigtailed 1 310 nm upstream and 1 490 nm downstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category O (uncontrolled envir
34、onments), as defined in Annex A of IEC 61753-1. Annex B of this standard provides information concerning the function of the 1 310 nm upstream and 1 490 nm downstream WWDM. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indisp
35、ensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mod
36、e fibres IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable
37、retention IEC 61300-2-5, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-5: Tests Torsion IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibr
38、e optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage threshold characterization IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-19: Tests
39、 Damp heat (steady state) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature BS EN 61753-087-6:2012 6 61753-087-6 IEC:2012(E) IEC 61300-2-42, Fibre optic interconnecting devices and passive component
40、s Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices IEC 61300-2-48, Fibre optic i
41、nterconnecting devices and passive components Basic test and measurement procedures Part 2-48: Tests Temperature-humidity cycling IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examination and measurements Polarization depend
42、ent loss in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and me
43、asurement procedures Part 3-7: Examinations and measurements Wavelength dependence of attenuation and return loss of single mode components IEC 61300-3-20, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Direct
44、ivity of fibre optic branching devices IEC 61753-1, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards IEC 62074-1, Fibre optic interconnecting devices and passive components Fibre optic WDM devices Part 1: Generic s
45、pecification 3 Test Unless otherwise specified, all test methods are in accordance with IEC 61300 series standards. Each test defines the number of samples to be evaluated. The samples shall have pigtails of single-mode fibres as per IEC 60793-2-50 type B 1.1, B 1.3 or B 6 in either coated fibres (p
46、rimary and secondary) or reinforced cable format. All measurements shall be carried out at standard atmosphere condition defined in IEC 61300-1, unless otherwise stated. All tests shall be carried out over the operating wavelength ranges of 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm, unless otherwis
47、e specified. NOTE 1 310 nm and 1 490 nm are the nominal or centre wavelengths, stated for the ranges 1 260 nm to 1 360 nm and 1 480 nm to 1 500 nm as defined in ITU-T Recommendations G.983.3 and G.984.2 and IEEE standard 802.3ah-2004. 4 Test report Fully documented test reports and supporting eviden
48、ce shall be prepared and be available for inspection as evidence that the tests have been carried out and complied with. 5 Performance requirements 5.1 Reference components The testing for these components does not require the use of reference components. BS EN 61753-087-6:201261753-087-6 IEC:2012(E
49、) 7 5.2 Dimensions Dimensions shall comply with either an appropriate IEC interface standard or with those given in appropriate manufacturers drawings, where the IEC interface standard does not exist or cannot be used. 5.3 Sample size, sequencing and grouping Sample sizes for the tests are defined in Annex A of this document. Test groups and test sequences shall be performed in sequential order as shown in Annex A. The t
