1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Connectors for electrical and electronic equipment Product requirements Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017)BS EN IEC 61076-2-111:2018
2、EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61076-2-111 March 2018 ICS 31.220 English Version Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2
3、017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 2-111 : Connecteurs circulaires - Spcification particulire pour les connecteurs dalimentation vis M12 (IEC 61076-2-111:2017) Steckverbinder fr elektronische Einrichtungen -Produktanforderungen - Teil 2-111: R
4、undsteckverbinder -Bauartspezifikation fr Leistungs-Steckverbinder mit Schraubverriegelung M12 (IEC 61076-2-111:2017) This European Standard was approved by CENELEC on 2018-01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
5、this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three off
6、icial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotec
7、hnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
8、 Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040
9、 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 61076-2-111:2018 E National forewordThis British Standard is the UK implementation of EN IEC 610762111:2018. It is identical to IEC 610762111:2017.The UK participati
10、on in its preparation was entrusted to Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the ne
11、cessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 76045 7ICS 31.220.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard
12、 was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 610762111:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 61076-2-111 March 2018 ICS 31.220 Englis
13、h Version Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking (IEC 61076-2-111:2017) Connecteurs pour quipements lectriques et lectroniques - Exigences de produit - Partie 2-111
14、 : Connecteurs circulaires - Spcification particulire pour les connecteurs dalimentation vis M12 (IEC 61076-2-111:2017) Steckverbinder fr elektronische Einrichtungen -Produktanforderungen - Teil 2-111: Rundsteckverbinder -Bauartspezifikation fr Leistungs-Steckverbinder mit Schraubverriegelung M12 (I
15、EC 61076-2-111:2017) This European Standard was approved by CENELEC on 2018-01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
16、 and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und
17、er the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Es
18、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European
19、Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide
20、 for CENELEC Members. Ref. No. EN IEC 61076-2-111:2018 E BS EN IEC 610762111:2018EN IEC 61076-2-111:2018 (E) 2 European foreword The text of document 48B/2601/FDIS, future edition 1 of IEC 61076-2-111, prepared by IEC/TC 48B “Electrical connectors, of IEC technical committee 48: Electrical connector
21、s and mechanical structures for electrical and electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61076-2-111:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identi
22、cal national standard or by endorsement (dop) 2018-10-11 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-01-11 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall
23、 not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61076-2-111:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 610762111:2018EN IEC 61076-2-111:2018 (E) 3 Annex ZA (normative) N
24、ormative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For un
25、dated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the Europea
26、n Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-581 2008 International Electrotechnical Vocabulary - Part 581: Electromechanical components for electronic equipment - - IEC 60068-1 - Environmental testing - Part 1: General and guidance
27、EN 60068-1 - IEC 60068-2-60 - Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test EN 60068-2-60 - IEC 60352-2 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance EN 60352-2 - IEC 60352-3 - Solderless conn
28、ections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance EN 60352-3 - IEC 60352-4 - Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and p
29、ractical guidance EN 60352-4 - IEC 60352-5 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance EN 60352-5 - IEC 60352-6 - Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practica
30、l guidance EN 60352-6 - IEC 60352-7 - Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance EN 60352-7 - IEC 60512-1-1 - Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual exam
31、ination EN 60512-1-1 - BS EN IEC 610762111:2018EN IEC 61076-2-111:2018 (E) 4 IEC 60512-1-2 - Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass EN 60512-1-2 - IEC 60512-2-1 - Connectors for electronic equipment -
32、Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method EN 60512-2-1 - IEC 60512-3-1 - Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance EN 60
33、512-3-1 - IEC 60512-4-1 - Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof EN 60512-4-1 - IEC 60512-5-1 - Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperat
34、ure rise EN 60512-5-1 - IEC 60512-6-3 - Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock EN 60512-6-3 - IEC 60512-6-4 - Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (si
35、nusoidal) EN 60512-6-4 - IEC 60512-9-1 - Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation EN 60512-9-1 - IEC 60512-9-2 - Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electri
36、cal load and temperature EN 60512-9-2 - IEC 60512-11-1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence EN 60512-11-1 - IEC 60512-11-4 - Connectors for electronic equipment - T
37、ests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature EN 60512-11-4 - IEC 60512-11-7 - Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test EN 60512-11-7 - IEC 60512-11-9 - Connector
38、s for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat EN 60512-11-9 - BS EN IEC 610762111:2018EN IEC 61076-2-111:2018 (E) 5 IEC 60512-11-10 - Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold EN 6
39、0512-11-10 - IEC 60512-11-12 - Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic EN 60512-11-12 - IEC 60512-13-2 - Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operating tests - Test 13b: In
40、sertion and withdrawal forces EN 60512-13-2 - IEC 60512-13-5 - Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operating tests - Test 13e: Polarizing and keying method EN 60512-13-5 - IEC 60512-16-5 - Connectors for electronic equipment - Tests and measurements -
41、 Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) EN 60512-16-5 - IEC 60512-19-3 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: T
42、est 19c - Fluid resistance EN 60512-19-3 - IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 + A1 1999 + A1 2000 + A2 2013 + A2 2013 IEC 60664-1 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requi
43、rements and tests EN 60664-1 - IEC 60999-1 - Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm (included) EN 609
44、99-1 - IEC 61076-1 2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification EN 61076-1 2006 IEC 61984 - Connectors - Safety requirements and tests EN 61984 - IEC 62197-1 - Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic s
45、pecification EN 62197-1 - ISO 1302 - Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation EN ISO 1302 - BS EN IEC 610762111:2018EN IEC 61076-2-111:2018 (E) 6 ISO 11469 - Plastics - Generic identification and marking of plastics products EN ISO 1
46、1469 - BS EN IEC 610762111:2018IEC 61076-2-111 Edition 1.0 2017-12 INTERNATIONAL STANDARD Connectors for electrical and electronic equipment Product requirements Part 2-111: Circular connectors Detail specification for power connectors with M12 screw-locking INTERNATIONAL ELECTROTECHNICAL COMMISSION
47、 ICS 31.220.10 ISBN 978-2-8322-5109-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. BS EN IEC 610762111:2018 2 IEC 61076-2-111:2017 IEC 2017 CONTENTS FOREWORD . 6 1 Scope 9 2 Normative refer
48、ences 9 3 Terms and definitions 11 4 Technical information 12 4.1 Systems of levels 12 4.1.1 Performance levels 12 4.1.2 Compatibility levels, according to IEC 61076-1 12 4.2 Classification into climatic categories 12 4.3 Creepage and clearance distances . 12 4.4 Current-carrying capacity 12 4.5 Mar
49、king . 13 4.6 Safety aspects 13 5 Dimensional information 13 5.1 General . 13 5.2 Survey of styles and variants 14 5.2.1 General . 14 5.2.2 Contact terminations 14 5.2.3 Number of contacts or contact cavities 14 5.2.4 Fixed connectors . 15 5.2.5 Free connectors . 21 5.3 Interface dimensions . 28 5.3.1 E-coding 28 5.3.2 F-coding 31 5.3.3 K-coding 35 5.3.4 L-coding 39 5.3.5 M-coding . 43 5.3.6 S-coding 47
