EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf

上传人:twoload295 文档编号:724016 上传时间:2019-01-09 格式:PDF 页数:50 大小:1.20MB
下载 相关 举报
EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf_第1页
第1页 / 共50页
EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf_第2页
第2页 / 共50页
EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf_第3页
第3页 / 共50页
EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf_第4页
第4页 / 共50页
EN ISO 10360-7-2011 en Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7 CMMs equipped with imaging pr.pdf_第5页
第5页 / 共50页
点击查看更多>>
资源描述

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10360-7:2011Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM)Part 7: CMMs equipped with imaging probi

2、ng systems (ISO 10360-7:2011)BS EN ISO 10360-7:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 10360-7:2011.The UK participation in its preparation was entrusted to T e c h n i c a l C o m m i t t e e T D W / 4 , T e c h n i c a l P r o d u c t R e a l

3、i z a t i o n .A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 57481 8 ICS 17.040.30 C

4、ompliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2011.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EURO

5、PISCHE NORM EN ISO 10360-7 June 2011 ICS 17.040.30 English Version Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) Spcification gomtrique des produits (GPS)

6、- Essais de rception et de vrification priodique des machines mesurer tridimensionnelles (MMT) - Partie 7: MMT quipes de systmes de palpage imageurs (ISO 10360-7:2011) Geometrische Produktspezifikation (GPS) - Annahme- und Besttigungsprfung fr Koordinatenmessgerte (KMG) - Teil 7: KMG mit Bildverarbe

7、itungssystemen (ISO 10360-7:2011) This European Standard was approved by CEN on 7 April 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-dat

8、e lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

9、under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

10、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

11、 NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10360-7:2011: EBS EN ISO 10360-7:2011 EN ISO 10360-7:2011 (E) 3 Foreword This document (EN ISO 10360-7:2011) has

12、 been prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification” in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European St

13、andard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn at the latest by December 2011. Attention is drawn to the possibility that some of the elements

14、 of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe

15、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the

16、 United Kingdom. Endorsement notice The text of ISO 10360-7:2011 has been approved by CEN as a EN ISO 10360-7:2011 without any modification. BS EN ISO 10360-7:2011ISO 10360-7:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword .v Introductionvi 1 Scope1 2 Normative references1 3 Terms and

17、 definitions .2 4 Symbols7 5 Environmental and metrological requirements8 5.1 Environmental conditions 8 5.2 Operating conditions 8 5.3 Requirements for various configuration imaging probe CMMs .8 5.3.1 General .8 5.3.2 Length measurement errors.9 5.3.3 Probing errors10 5.3.4 Repeatability range of

18、the length measurement error, RBor RU.10 5.3.5 Workpiece loading effects10 6 Acceptance tests and reverification tests 11 6.1 General .11 6.2 Length measurement errors.11 6.2.1 General .11 6.2.2 Measuring equipment .12 6.2.3 Length measurement error, EBor EU.13 6.2.4 Z length measurement error, EBZo

19、r EUZ.14 6.2.5 XY length measurement error, EBXYor EUXY15 6.2.6 Imaging probe length measurement error, EBVor EUV15 6.3 Squareness error, ESQ16 6.3.1 General .16 6.3.2 Measuring equipment .16 6.3.3 Measuring positions17 6.3.4 Measuring procedure 17 6.3.5 Derivation of test results 18 6.4 Repeatabili

20、ty range of the length measurement error, RBor RU.19 6.5 Probing performance (PF2D) .19 6.5.1 Principle19 6.5.2 Measuring equipment .19 6.5.3 Procedure.19 6.5.4 Derivation of test results 21 6.6 Probing error of the imaging probe, PFV2D.21 6.6.1 Principle21 6.6.2 Measuring equipment .21 6.6.3 Proced

21、ure.21 6.6.4 Derivation of test results 21 7 Compliance with specifications.22 7.1 Acceptance test .22 7.1.1 Acceptance criteria .22 7.1.2 Data rejection and repeated measurements.24 7.2 Reverification test .24 8 Applications .24 BS EN ISO 10360-7:2011ISO 10360-7:2011(E) iv ISO 2011 All rights reser

22、ved8.1 Acceptance test .24 8.2 Reverification test25 8.3 Interim check25 9 Indication in product documentation and data sheets26 Annex A (informative) Interim check.27 Annex B (normative) Artefacts that represent a calibrated test length.28 Annex C (informative) Alternative method for checking the s

23、quareness error34 Annex D (normative) Mathematical adjustments to low CTE artefacts .36 Annex E (informative) Relation to the GPS matrix model .38 Bibliography 39 BS EN ISO 10360-7:2011ISO 10360-7:2011(E) ISO 2011 All rights reserved vForeword ISO (the International Organization for Standardization)

24、 is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be repre

25、sented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are

26、 drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internationa

27、l Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10360-7 was pr

28、epared by Technical Committee ISO/TC 213, Dimensional and geometrical product specifications and verification. ISO 10360 consists of the following parts, under the general title Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM): Part

29、 1: Vocabulary Part 2: CMMs used for measuring linear dimensions Part 3: CMMs with the axis of a rotary table as the fourth axis Part 4: CMMs used in scanning measuring mode Part 5: CMMs using single and multiple stylus contacting probing systems Part 6: Estimation of errors in computing of Gaussian

30、 associated features Part 7: CMMs equipped with imaging probing systems Part 9: CMMs with multiple probing systems The following part is under preparation: Part 8: CMMs with optical distance sensors BS EN ISO 10360-7:2011ISO 10360-7:2011(E) vi ISO 2011 All rights reservedIntroduction This part of IS

31、O 10360 is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO/TR 14638). It influences chain link 5 of the chains of standards on size, distance, radius, angle, form, orientation, location, run-out and datums. For more detailed information on

32、the relation of this part of ISO 10360 to other standards and the GPS matrix model, see Annex E. The tests of this part of ISO 10360 have two technical objectives: a) to test the error of indication of a calibrated test length using an imaging probing system; b) to test the errors in the imaging pro

33、bing system. The benefits of these tests are that the measured result has a direct traceability to the unit length, the meter, and that it gives information on how the CMM will perform on similar length measurements. The structure of this part of ISO 10360 parallels that of ISO 10360-2, which is for

34、 CMMs equipped with contact probing systems. The testing methodology between these two parts of ISO 10360 is intentionally similar. The differences that exist may be eliminated in future revisions of either this part of ISO 10360 or ISO 10360-2. All the definitions in Clause 3 will appear in the rev

35、ision of ISO 10360-1:2000. BS EN ISO 10360-7:2011INTERNATIONAL STANDARD ISO 10360-7:2011(E) ISO 2011 All rights reserved 1Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems 1 Scope Th

36、is part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of th

37、e CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only to Cartesian CMMs using imaging probing systems of any type operating in the discrete-point probing mode. This part of ISO 10360 does not explicitly apply to: non-Cartesian CMMs; however, parties may a

38、pply this part of ISO 10360 to non-Cartesian CMMs by mutual agreement; CMMs using other types of optical probing; however, parties may apply this approach to other optical CMMs by mutual agreement; CMMs using contact probing systems (see ISO 10360-2 for contact probing systems). This part of ISO 103

39、60 specifies performance requirements that can be assigned by the manufacturer or the user of a CMM, the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements, rules for proving conformance, and applications for which the acceptance and reverification

40、tests can be used. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 103

41、60-1:2000, Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 1: Vocabulary ISO 10360-2:2009, Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used

42、for measuring linear dimensions ISO 14253-1:1998, Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for proving conformance or non-conformance with specifications BS EN ISO 10360-7:2011ISO 10360-7:2011(E) 2 ISO 2011 All ri

43、ghts reservedISO 14660-1:1999, Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions ISO/TS 23165:2006, Geometrical product specifications (GPS) Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty ISO/IEC Guide 99, Intern

44、ational vocabulary of metrology Basic and general concepts and associated terms (VIM) 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 10360-1, ISO 10360-2, ISO 14253-1, ISO 14660-1, ISO/TS 23165, ISO/IEC Guide 99 and the following apply. 3.1 imaging

45、probing system probing system which creates measurement points through the use of an imaging system NOTE 1 This part of ISO 10360 is primarily concerned with imaging probing systems that enable measurements in the lateral direction to the probing system axis. NOTE 2 A video or vision probing system

46、is an imaging probing system. 3.2 imaging probe CMM CMM equipped with an imaging probing system 3.3 field of view FOV area viewed by the imaging probing system See Figure 1. NOTE The measuring limits, or size, of the FOV are stated as the limits of the object space that is reproduced in the final im

47、age. 3.4 measuring window region of interest in the FOV that is used in the determination of the measured point(s) See Figure 1. NOTE Configurations of measuring windows may vary widely between various imaging probe CMMs and for different measuring applications on the same imaging probe CMM. 3.5 mea

48、suring plane (of the imaging probing system) two-dimensional plane defined by the FOV of an imaging probing system 3.6 coefficient of thermal expansion CTE linear thermal expansion coefficient of a material at 20 C BS EN ISO 10360-7:2011ISO 10360-7:2011(E) ISO 2011 All rights reserved 33.7 normal CT

49、E material material with a CTE between 8 106/C and 13 106/C 3.8 test circle circular material standard used for acceptance test and reverification test 24+Y+X576+Z13Key 1 camera or other device for capturing an image of the measured object 2 various optical elements of the imaging probing system 3 measured object 4 FOV (object) 5 FOV (image) 6 measuring window 7 measured point Figure 1 Imaging probing system 3.9 bidirectional length measurement error EBerror of indication when

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1