1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 16119-3:2013Agricultural and forestry machinery - Environmental requirements for sprayersPart 3: Sprayers for bush and tree crops (ISO 16119-3:2013) BS EN ISO 16119-3:2
2、013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16119-3:2013. It is identical to ISO 16119-3:2013. It supersedes BS EN 12761-3:2001 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/15, Equipment for crop
3、 protection and application of liquid fertilizer.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British S
4、tandards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 72834 1 ICS 65.060.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2
5、013.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16119-3 March 2013 ICS 65.060.40 Supersedes EN 12761-3:2001English Version Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for
6、bush and tree crops (ISO 16119-3:2013) Matriel agricole et forestier - Exigences environnementales pour les pulvrisateurs - Partie 3: Pulvrisateurs pour arbustes et arboriculture (ISO 16119-3:2013) Land- und Forstmaschinen - Pflanzenschutzgerte zum Ausbringen von Pflanzenschutzmitteln und flssigen D
7、ngemitteln - Umweltschutz - Teil 3: Sprhgerte fr Raumkulturen und vergleichbare Gerte (ISO 16119-3:2013) This European Standard was approved by CEN on 5 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta
8、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (Engli
9、sh, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, B
10、ulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
11、 Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No.
12、 EN ISO 16119-3:2013: EBS EN ISO 16119-3:2013EN ISO 16119-3:2013 (E) 3 Foreword This document (EN ISO 16119-3:2013) has been prepared by Technical Committee CEN/TC 144 “Tractorsand machinery for agriculture and forestry“, the secretariat of which is held by AFNOR, in collaboration withTechnical Comm
13、ittee ISO/TC 23 “Tractors and machinery for agriculture and forestry“. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by September 2013, and conflicting national standards shall bewithdrawn at the la
14、test by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12761-3:2001. The following major c
15、hanges were introduced: extension of the scope; updating of the normative references; addition of a definition; addition of a new clause “List of significant hazards“; revision of requirements on control of spray drift and on cleaning;addition of a clause “Verification“; completion of clause “Instru
16、ction handbook“; deletion of Annex A “Test method for cleaning plant protection product cans“, and deletion of Annex B “Example of device for cleaning of plant protection product cans“ and addition of a reference toISO 21278-1; addition of Annex ZA. This document has been prepared under a mandate gi
17、ven to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national
18、 standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
19、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 16119-3:2013EN ISO 16119-3:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of EC Dir
20、ective 2009/127/EC amending 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide a means of conforming to Essential Requirements of theNew Approach Directive 2009/127/EC amending 2006/42/EC. Once
21、 this standard is cited in the Official Journal of the European Union under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the normative clauses ofthis standard confers, within the limits of the scope of this standard, a presumption of con
22、formity with therelevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling withinthe scope of this standard. BS EN ISO 16119-3:2013ISO 16119-3:2013(E) ISO 2013 All rights reserved i
23、iiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 List of significant hazards . 25 Requirements 35.1 General . 35.2 Volume/hectare adjustment system 85.3 Distribution of liquid and air 85.4 Cleaning . 95.5 Cleaning devices . 105.6 Additional requ
24、irements for spray guns and lances 106 Verification 107 Marking .118 Instruction handbook 11Bibliography .12BS EN ISO 16119-3:2013ISO 16119-3:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work o
25、f preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmenta
26、l, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main t
27、ask of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attenti
28、on is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 16119-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 144,
29、Tractors and machinery for agriculture and forestry, in collaboration with ISO Technical Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agree
30、ment).ISO 16119 consists of the following parts, under the general title Agricultural and forestry machinery Environmental requirements and testing for sprayers: Part 1: General Part 2: Horizontal boom sprayers Part 3: Sprayers for bush and tree crops Part 4: Fixed and semi-mobile sprayersiv ISO 201
31、3 All rights reservedBS EN ISO 16119-3:2013ISO 16119-3:2013(E)IntroductionThe requirements of this part of ISO 16119 are based on the test methods given in ISO 5682-2:1997, which were primarily developed for hydraulic sprayers. For other types of sprayers, other test methods and/or test criteria may
32、 be needed and may be the subject of future investigation/revision of this part of ISO 16119.This document is a type C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this doc
33、ument.When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type
34、 C standard. ISO 2013 All rights reserved vBS EN ISO 16119-3:2013BS EN ISO 16119-3:2013Agricultural and forestry machinery Environmental requirements for sprayers Part 3: Sprayers for bush and tree crops1 ScopeThis part of ISO 16119 specifies requirements and the means for their verification for the
35、 design and performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.It is not applicable to human-mounted sprayers for bushes or tre
36、es.It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over
37、the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254-6).This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.2 Normative referencesThe following docu
38、ments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4102, Equipment for cr
39、op protection Sprayers Connection threadingISO 4254-6:2009, Agricultural machinery Safety Part 6: Sprayers and liquid fertilizer distributorsISO 4288, Geometrical Product Specifications (GPS) Surface texture: Profile method Rules and procedures for the assessment of surface textureISO 5681, Equipmen
40、t for crop protection VocabularyISO 5682-1, Equipment for crop protection Spraying equipment Part 1: Test methods for sprayer nozzlesISO 5682-2:1997, Equipment for crop protection Spraying equipment Part 2: Test methods for hydraulic sprayersISO 5682-3:1996, Equipment for crop protection Spraying eq
41、uipment Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayersISO 9357, Equipment for crop protection Agricultural sprayers Tank nominal volume and filling hole diameterISO 9898:2000, Equipment for crop protection Test methods for air-assisted sprayers
42、for bush and tree cropsISO 13440:1996, Equipment for crop protection Agricultural sprayers Determination of the volume of total residualINTERNATIONAL STANDARD ISO 16119-3:2013(E) ISO 2013 All rights reserved 1BS EN ISO 16119-3:2013ISO 16119-3:2013(E)ISO 16119-1:2013, Agricultural and forestry machin
43、ery Environmental requirements for sprayers Part 1: GeneralISO 21278-1, Equipment for crop protection Induction hoppers Part 1: Test methodsISO 21278-2, Equipment for crop protection Induction hoppers Part 2: General requirements and performance limitsISO 22368-1, Crop protection equipment Test meth
44、ods for the evaluation of cleaning systems Part 1: Internal cleaning of complete sprayersISO 22368-3, Crop protection equipment Test methods for the evaluation of cleaning systems Part 3: Internal cleaning of tank3 Terms and definitionsFor the purposes of this document, the terms and definitions giv
45、en in ISO 5681 and the following apply.3.1sprayer for bush and tree cropsmachine for spraying plant protection products on bush and tree crops such as grapes, fruits or hops (including annual plants/crops), the application being mostly directed sideways and/or upwards to the target3.2plant protectio
46、n product containercollective name for plant protection product packagingEXAMPLE Can, bottle, bag, sack, box.3.3cleaning devicedevice for cleaning the insides of empty plant protection product containersNote 1 to entry: The device may be an integral part of the sprayer or an independent installation
47、 (e.g. stationary equipment).4 List of significant hazardsTable 1 specifies the significant hazards, the significant hazardous situations and significant hazardous event(s) covered by this part of ISO 16119 that have been identified by risk assessment as being relevant for this type of machine with
48、regard to environmental contamination, and which require specific action by the designer or manufacturer to eliminate or to reduce environmental contamination.Attention is drawn to the necessity to verify that the environmental requirements specified in both ISO 16119-1 and this part of ISO 16119 ap
49、ply to each significant hazard presented by a given machine and to validate that the risk assessment is complete.2 ISO 2013 All rights reservedBS EN ISO 16119-3:2013ISO 16119-3:2013(E)Table 1 List of significant hazardsHazardHazardous situation/eventClause/subclause of this part of ISO 161194.1 Spillages FillingInduction of plant pro-tection products5.1.1.2; 85.1.1.2; 84.2 Contamination of the water supply Filling 5.1.1.24.3 Leakages Transport and applica-tionContact with crop5
