1、 ETSI EN 301 908-1 V7.1.1 (2015-03) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R Part 1: Introduction and common requirements HARMONIZED EUROPEAN STANDARD ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 2 Reference REN/MSG-TFES-011-01 Keywords 3G, 3GPP, 3G
2、PP2, cdma2000, cellular, digital, E-UTRA, IMT, IMT-2000, IMT-Advanced, LTE, LTE-Advanced, MAN-Advanced, mobile, radio, regulation, UMTS, UTRA, WCDMA, WiMAX ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - N
3、AF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electron
4、ic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) v
5、ersion kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.a
6、sp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
7、 and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. Al
8、l rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered
9、 and owned by the GSM Association. ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 5g3Introduction 5g31 Scope 6g32 References 6g32.1 Normative references . 6g32.2 Informative references 6g33 Definitions, symbols and abbreviatio
10、ns . 7g33.1 Definitions 7g33.2 Symbols 9g33.3 Abbreviations . 10g34 Technical requirements specifications . 10g34.1 Environmental profile . 10g34.2 Conformance requirements 11g34.2.1 Introduction. 11g34.2.2 Radiated emissions (UE) 11g34.2.2.1 Definition 11g34.2.2.2 Limits 11g34.2.2.3 Conformance . 1
11、2g34.2.3 Radiated emissions (BS and repeater) 12g34.2.3.1 Definition 12g34.2.3.2 Limits 12g34.2.3.3 Conformance . 13g34.2.4 Control and monitoring functions (UE) 13g34.2.4.1 Definition 13g34.2.4.2 Limits 13g34.2.4.3 Conformance . 13g35 Testing for compliance with technical requirements 13g35.1 Envir
12、onmental conditions for testing . 13g35.2 Interpretation of the measurement results 14g35.3 Essential radio test suites 14g35.3.1 Radiated emissions (UE) 14g35.3.1.1 Test method . 14g35.3.1.2 Test configurations 15g35.3.2 Radiated emissions (BS and repeater) 15g35.3.2.1 Test method . 15g35.3.2.2 Tes
13、t configurations 16g35.3.3 Control and monitoring functions (UE) 17g35.3.3.1 Test method . 17g3Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) 18g3Annex B (informative): Receiver sensitivity and correct operation of the equipment . 20g3B.1 Receiver sensitivity
14、 20g3B.2 Correct functioning of the equipment. 20g3Annex C (informative): Overview and organization of ETSI EN 301 908 standard parts 21g3Annex D: Void . 25g3Annex E (informative): Bibliography . 26g3History 27g3ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 4 Intellectual Property Rights IPRs essential or
15、 potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Esse
16、ntial, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee ca
17、n be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standard
18、s Group (MSG). The present document has been produced by ETSI in response to mandate M/284 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.6. The title and reference to the present document are intended to be included in the publication in the Offi
19、cial Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC i.2. The requirements relevant to Directive 1999/5/EC i.2 are summarized in annex A. The present document is part 1 of a multi-part deliverable covering the essential requirements under a
20、rticle 3.2 of Directive 1999/5/EC i.2 (R Part 2: “CDMA Direct Spread (UTRA FDD) User Equipment (UE)“; Part 3: “CDMA Direct Spread (UTRA FDD) Base Stations (BS)“; Part 4: “CDMA Multi-Carrier (cdma2000) User Equipment (UE)“; Part 5: “CDMA Multi-Carrier (cdma2000) Base Stations (BS)“; Part 6: “CDMA TDD
21、 (UTRA TDD) User Equipment (UE)“; Part 7: “CDMA TDD (UTRA TDD) Base Stations (BS)“; Part 8: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R Part 9: “Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essenti
22、al requirements of article 3.2 of the R Part 10: “Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Part 11: “CDMA Direct Spread (UTRA FDD) (Repeaters)“; Part 12: “Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (Repeaters) covering the es
23、sential requirements of article 3.2 of the R Part 13: “Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)“; Part 14: “Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)“; Part 15: “Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters)“; ETSI ETS
24、I EN 301 908-1 V7.1.1 (2015-03) 5 Part 16: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (UE) covering the essential requirements of article 3.2 of the R Part 17: “Harmonized EN for IMT-2000, Evolved CDMA Multi-Carrier Ultra Mobile Broadband (UMB) (BS) covering
25、 the essential requirements of article 3.2 of the R Part 18: “E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“; Part 19: “OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)“; Part 20: “OFDMA TDD WMAN (Mobile WiMAX) TDD Base Station (BS)“; Part 21: “OFDMA TDD WMAN (Mobile Wi
26、MAX) FDD User Equipment (UE)“; Part 22: “OFDMA TDD WMAN (Mobile WiMAX) FDD Base Stations (BS)“. National transposition dates Date of adoption of this EN: 10 March 2015 Date of latest announcement of this EN (doa): 30 June 2015 Date of latest publication of new National Standard or endorsement of thi
27、s EN (dop/e): 31 December 2015 Date of withdrawal of any conflicting National Standard (dow): 31 December 2016 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in
28、 clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modula
29、r structure to cover all radio and telecommunications terminal equipment within the scope of the R Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R A guide to the production of Harmonized Standards for application under the R Uncertainties in the m
30、easurement of mobile radio equipment characteristics“. i.6 Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. i.7 Recommendation ITU
31、-R M.1457-11 (2013): “Detailed specifications of the terrestrial radio interfaces of International Mobile Telecommunications-2000 (IMT-2000)“. i.8 Recommendation ITU-R M.2012 (2012): “Detailed specifications of the terrestrial radio interfaces of International Mobile Telecommunications-Advanced (IMT
32、-Advanced)“. i.9 Recommendation ITU-R SM.1539-1 (2002): “Variation of the boundary between the out-of-band and spurious domains required for the application of Recommendations ITU-R SM.1541 and ITU-R SM.329“. i.10 ETSI EN 301 908-10 (V4.1.1) (07-2009): “Electromagnetic compatibility and Radio spectr
33、um Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R Harmonized EN covering the essential requirements of article 3.2 of t
34、he R and the equipment cannot be used on a stand-alone basis to provide user functions independently of a UE, BS or combination of BS and repeater; and the UE, BS or combination of BS and repeater to which it is connected, is capable of providing some intended operation, such as transmitting and/or
35、receiving without the ancillary equipment (i.e. it is not a sub-unit of the main equipment essential to the main equipment basic functions). applicable part: part of the multi-part deliverable, of which the present document is the first part, for which the scope of that document includes the equipme
36、nt to be tested ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 8 Base Station RF bandwidth: bandwidth in which a Base Station transmits and receives multiple carriers and/or RATs simultaneously channel bandwidth: RF bandwidth supporting a single E-UTRA, Mobile WiMAX or UMB RF carrier with the transmission
37、bandwidth configured in the uplink or downlink of a cell NOTE: The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF requirements. enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge NOTE: In the
38、 case of integral antenna equipment, this port is inseparable from the antenna port. environmental profile: range of environmental conditions under which equipment within the scope of the present document is required to comply with the provisions of the present document idle mode: state of User Equi
39、pment (UE) when switched on but with no Radio Resource Control (RRC) connection IMT-2000: mobile systems as defined in Recommendation ITU-R M.1457-11 i.7 NOTE: Recommendation ITU-R M.1457-11 i.7 identifies the detailed specifications for the IMT-2000 radio interfaces. IMT-Advanced: mobile systems as
40、 defined in Recommendation ITU-R M.2012 i.8 NOTE: Recommendation ITU-R M.2012 i.8 identifies the detailed specifications for the IMT-Advanced radio interfaces. Lower RF bandwidth edge: frequency of the lower edge of the Base Station RF bandwidth, used as a frequency reference point for transmitter a
41、nd receiver requirements MSR Base Station: Base Station characterized by the ability of its receiver and transmitter to process two or more carriers in common active RF components simultaneously in a declared RF bandwidth, where at least one carrier is of a different RAT than the other carrier(s) mu
42、lti-band Base Station: Base Station characterized by the ability of its transmitter and/or receiver to process two or more carriers in common active RF components simultaneously, where at least one carrier is configured at a different non-overlapping operating band than the other carrier(s) port: pa
43、rticular interface, of the specified equipment (apparatus), with the electromagnetic environment NOTE: For example, any connection point on an equipment intended for connection of cables to or from that equipment is considered as a port (see figure 3.1-1). Figure 3.1-1: Examples of ports Enclosure p
44、ort Apparatus DC Power port AC Power port Earth port Antenna port Signal/Control port Telecommunications port ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 9 Figure 3.1-2: BS with single enclosure solution Figure 3.1-3: BS with multiple enclosure solution radio communications equipment: telecommunications
45、 equipment which includes one or more transmitters and/or receivers and/or parts thereof for use in a fixed, mobile or portable application NOTE: It can be operated with ancillary equipment but if so, is not dependent on it for basic functionality. radio digital unit: equipment which contains base b
46、and and functionality for controlling Radio unit radio equipment: equipment which contains Radio digital unit and Radio unit radio unit: equipment which contains transmitter and receiver signal and control port: port which carries information or control signals, excluding antenna ports telecommunica
47、tion port: port which is intended to be connected to telecommunication networks (e.g. public switched telecommunication networks, integrated services digital networks), local area networks (e.g. Ethernet, token ring) and similar networks traffic mode: state of User Equipment (UE) when switched on an
48、d with Radio Resource Control (RRC) connection established Upper RF bandwidth edge: frequency of the upper edge of the Base Station RF bandwidth, used as a frequency reference point for transmitter and receiver requirements WiMAX: trade marked name for the OFDMA TDD WMAN IMT technology 3.2 Symbols F
49、or the purposes of the present document, the following symbols apply: BWChannelChannel bandwidth FBW RF, highUpper RF bandwidth edge FBW RF, lowLower RF bandwidth edge Radio Equipment BS Equipment Radio digital unit Radio Equipment Radio unit BS Equipment ETSI ETSI EN 301 908-1 V7.1.1 (2015-03) 10 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: BS Base Station CDMA Code Division Multiple Access CW Continuous Wave DECT Digital Enhanced Cordless Telecommunication e.i.r.p. equivalent isotropically radi
