ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf

上传人:bowdiet140 文档编号:730213 上传时间:2019-01-08 格式:PDF 页数:5 大小:23.48KB
下载 相关 举报
ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf_第1页
第1页 / 共5页
ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf_第2页
第2页 / 共5页
ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf_第3页
第3页 / 共5页
ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf_第4页
第4页 / 共5页
ETSI EN 302 190-2005 Near Field Communication Interface and Protocol (NFCIP-1) (V1 1 1 ISO IEC 18092 (2004) Modified)《近场通信 接口和协议(NFCIP-1)(版本1 1 1) ISO IEC 18092(2004) 修正本》.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ETSI EN 302 190 V1.1.1 (2005-06)European Standard (Telecommunications series) Near Field Communication;Interface and Protocol (NFCIP-1)ISO/IEC 18092 (2004) modifiedETSI ETSI EN 302 190 V1.1.1 (2005-06) 2 Reference DEN/ECMA-00299 Keywords endorsement, NFC ETSI 650 Route des Lucioles F-06921 Sophia A

2、ntipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The pr

3、esent document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printe

4、rs of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/

5、status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restri

6、ction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for t

7、he benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 302 190 V1.1.1 (2005-06) 3 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to

8、ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is avai

9、lable from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenc

10、ed in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards

11、Institute (ETSI). It specifies the interface and protocol for simple wireless communication between close coupled devices, and it refers the NFCIP-1 test method standards. These Near Field Communication (NFC) devices communicate with transfer rates of 106 kbps, 212 kbps and 424 kbps. The present doc

12、ument allows, but does not specify, applications in network products and consumer equipment. The present document endorses International Standard ISO/IEC 18092. National transposition dates Date of adoption of this EN: 17 June 2005 Date of latest announcement of this EN (doa): 30 September 2005 Date

13、 of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2006 Date of withdrawal of any conflicting National Standard (dow): 31 March 2006 Endorsement notice The text of International Standard ISO/IEC 18092 (2004) was approved by ETSI as an EN with agreed modificat

14、ions as given below. NOTE: New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used to highlight detailed modifications where necessary. ETSI ETSI EN 302 190 V1.1.1 (2005-06) 4 Clause 2 Replace the paragraph by: In addition to passing all normative tests

15、and meeting all requirements specified in ISO/IEC 22536 and ISO/IEC 23917, conforming implementations implement both the Active and the Passive communication modes and meet all other requirements specified in ISO/IEC 18092. Clause 3 Replace the first paragraph by: The following documents contain pro

16、visions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific re

17、ference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 2 ETSI TS 102 346: “NFCIP-1; RF interface test methods“

18、 3 ETSI TS 102 394: “NFCIP-1 - Protocol Test Methods“. Throughout the text of ISO/IEC 18092 Replace references as shown in the table below: Reference in ISO/IEC 18092 Modified reference ISO/IEC 22536 TS 102 346 2 ISO/IEC 23917 TS 102 394 3 Throughout the text of ISO/IEC 18092 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 302 190 V1.1.1 (2005-06) 5 History Document history V1.1.1 February 2005 One-step Approval Procedure OAP 20050617: 2005-02-16 to 2005-06-17 V1.1.1 June 2005 Publication

展开阅读全文
相关资源
猜你喜欢
  • AECMA PREN 3143-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 cadmium plated inch base series Edition P 1《航空航天系列.镍合金 NI-P11镉板 100°标称.pdf AECMA PREN 3143-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 cadmium plated inch base series Edition P 1《航空航天系列.镍合金 NI-P11镉板 100°标称.pdf
  • AECMA PREN 3144-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 inch base series Edition P 1《航空航天系列.镍合金 NI-P11 100°标称埋头实心铆钉 英制系列.版本P1》.pdf AECMA PREN 3144-2009 Aerospace series Rivets solid 100 degrees countersunk normal head in nickel alloy NI-P11 inch base series Edition P 1《航空航天系列.镍合金 NI-P11 100°标称埋头实心铆钉 英制系列.版本P1》.pdf
  • AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P .pdf AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P .pdf
  • AECMA PREN 3146-1995 Aerospace Series Round Bars with Close Tolerances Hot Formed in Steel 6 mm D Less Than or Equal to 250 mm Dimensions Edition P 1《航空航天系列.热轧钢制圆形棒材紧公差6mm小于或等于直径D小.pdf AECMA PREN 3146-1995 Aerospace Series Round Bars with Close Tolerances Hot Formed in Steel 6 mm D Less Than or Equal to 250 mm Dimensions Edition P 1《航空航天系列.热轧钢制圆形棒材紧公差6mm小于或等于直径D小.pdf
  • AECMA PREN 3148-1989 Aerospace Series Shank Nuts Self-Locking Flange Restrained Installation Procedure Issue P 2《航空航天系列自锁受限制法兰螺母安装程序.P2版》.pdf AECMA PREN 3148-1989 Aerospace Series Shank Nuts Self-Locking Flange Restrained Installation Procedure Issue P 2《航空航天系列自锁受限制法兰螺母安装程序.P2版》.pdf
  • AECMA PREN 3149-1987 Aerospace Series Shank Nuts Metric Installation Holes Issue P 1《航空航天系列米制安装孔螺母.P1版》.pdf AECMA PREN 3149-1987 Aerospace Series Shank Nuts Metric Installation Holes Issue P 1《航空航天系列米制安装孔螺母.P1版》.pdf
  • AECMA PREN 3150-1988 Aerospace Series Pin Shoulder Headless in NI-P100HT (INCO 718) Issue P 1《耐热镍基NI-P100HT型合金制肩部无头轴销》.pdf AECMA PREN 3150-1988 Aerospace Series Pin Shoulder Headless in NI-P100HT (INCO 718) Issue P 1《耐热镍基NI-P100HT型合金制肩部无头轴销》.pdf
  • AECMA PREN 3151-1988 Aerospace Series Plain Dowels in NI-P100HT (Inconel 718) Issue P 1《耐热镍基合金NI-P100HI(因康718)制无槽圆柱销》.pdf AECMA PREN 3151-1988 Aerospace Series Plain Dowels in NI-P100HT (Inconel 718) Issue P 1《耐热镍基合金NI-P100HI(因康718)制无槽圆柱销》.pdf
  • AECMA PREN 3152-1989 Aerospace Series Propulsion Standard Parts Nuts Self-Locking in Heat Resisting Steel FE-PA92HT (A286) Classification 1100 MPa 425 Degrees Celsius Technical Spe.pdf AECMA PREN 3152-1989 Aerospace Series Propulsion Standard Parts Nuts Self-Locking in Heat Resisting Steel FE-PA92HT (A286) Classification 1100 MPa 425 Degrees Celsius Technical Spe.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1