1、ETSI PRI-ETS*300 309 95 3400855 OOLSOL7 875 EISI ELECOMMUNICATION STANDARD FINAL DRAFT prl-ETS 300 309 February 1995 Source: ETSI TC-SPS Reference: DI/SPS-05008 UDC: 621.395 Key words: ISDN, DSS1, PIXIT, layer 2, basic, access, user Integrated Services Digital Network (ISDN); Digital Subscriber Sign
2、alling System No. one (DSSI ); Partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for data link layer protocol for general application (basic access, user) ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: 06921 Sophia Ant
3、ipolis Cedex - FRANCE Office address: Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Tel.: t 33 92 94 42 O0 - Fax: t 33 93 65 47 16 European Telecommunications Standards Institute 1 995. All rights reserved. F c No part may be reproduced except as authorised by written permission. The cop
4、yright and the foregoing restriction on reproduction extend to all media in which the information may be embodied. Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accur
5、acy, please write to “ETSI Editing and Standards Approval Dept.“ at the address shown on the title page. Page 3 Final draft prl-ETS 300 309: February 1995 Contents Foreword . 5 Introduction 5 1 Scope . 7 2 Normative references 7 3 Definitions and abbreviations 7 3.1 Definitions . 7 3.2 Abbreviations
6、 8 4 Conformance . 8 Annex A (normative): Partial PIXIT proforma 9 A.l A.2 A.3 A.4 A.5 A.6 Identification summary 9 Abstract test suite summary . 9 Test laboratory . 9 Client (of the test laboratory) 10 System Under Test (SUT) 10 Protocol information 11 A.6.1 Protocol identification . 11 A.6.2 Param
7、eter values., 11 A.6.3 Timer values 11 A.6.4 Sending of frames by IUT 12 A.6.5 Call states stability . 12 History 13 . ETSI PRI-ETS*300 309 95 3400855 OOLEOZO 3bT Page 4 Final draft prl-ETS 300 309: February 1995 Blank page - ETSI PRI-ETSm300 309 95 m 3400855 0032023 2Tb m Page 5 Final draft prl-ETS
8、 300 309: February 1995 Foreword This final draft Interim European Telecommunication Standard (I-ETS) has been produced by the Signalling Protocols and Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI), and is now submitted for the Voting phase of the
9、ETSI standards approval procedure. An ETSI standard may be given LETS status either because it is regarded as a provisional solution ahead of a more advanced standard, or because it is immature and requires a “trial period“. The life of an I-ETS is limited to three years after which it can be conver
10、ted into an ETS, have its life extended for a further two years, be replaced by a new version or, be withdrawn. This I-ETS forms part of a set of I-ETSs completing the documentation of ETS 300 125 (ISDN data link layer protocol) as specified in ISOAEC 9646-1 (e.g. conformance testing) as follows: I-
11、ETS 300 305: “Protocol Implementation Conformance Statement (PICS) proforma specification (basic access, user)“; I-ETS 300 306: “PICS proforma specification (primary rate access, user)“; I-ETS 300 307: “PICS proforma specification (basic access, network)“; I-ETS 300 308: “PICS proforma specification
12、 (primary rate access, network)“; I-ETS 300 309: “Partial Protocol implementation extra Information for Testing (PIXIT) proforma specification (basic access, user)“; I-ETS 300 310: “Partial PIXIT proforma specification (primary rate access, user)“; I-ETS 300 313: “Abstract test suite specification (
13、user)“. Proposed announcement date Date of latest announcement of this LETS (doa): 3 months after ETSI publication Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a given Open Systems
14、 Interconnection (OSI) protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS). In addition to the PICS, it will be normal for the test laboratory to require a Protocol Implementation extra information for Testing (PIXIT) statement based on a proforma, related to
15、a specific abstract test suite and to the relevant means of testing. This PIXIT proforma will normally be provided by the test laboratory to the client with a request for its completion together with the PICS proforma. The partial PIXIT proforma contained in annex A of this LETS is required to be au
16、gmented, as necessary, by the test realizer (who produces the executable test suite) and by the test laboratory in order to produce the (non-partial) PIXIT proforma. The completed PIXIT will normally be used in conjunction with the completed PICS, as it adds precision to the information given in the
17、 PICS. ETSI PRI-ETSa300 309 95 m 3400855 O032022 132 m Page 6 Final draft prl-ETS 300 309: February 1995 Blank page - ETSI PRI-ETSr300 309 95 = 3400855 0032023 079 Page 7 Final draft prl-ETS 300 309: February 1995 I Scope This Interim European Telecommunication Standard (LETS) provides the partial P
18、rotocol Implementation extra Information for Testing (PIXIT) proforma for the Integrated Services Digital Network (ISDN) data link layer protocol (basic access, user) as specified in ETS 300 125 111 in compliance with the relevant requirements and in accordance with the relevant guidance given in IS
19、O/IEC 9646-1 141, ISO/IEC 9646-2 51, ISO/IEC 9646-4 i61 and ISO/IEC 9646-5 i71. 2 Normative references This LETS incorporates by dated and undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed
20、 hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this LETS only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies. i11 I21 i31 I41 i51 61 i71 ETS 300 125 (199
21、1): “Integrated Services Digital Network (ISDN); User-network interface data link layer specification; Application of CCITT Recommendations 0.920/1.440 and 0.921 A.441 I. LETS 300 305 (1 994): “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1); Protocol
22、Implementation Conformance Statement (PICS) proforma specification for data link layer protocol for general application (basic access, user)“. prl-ETS 300 31 3: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1); Abstract Test Suite (ATSI specification f
23、or data link layer protocol for general application (user)“. ISO/IEC 9646-1 (1 991 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1 : General concepts“. ISO/IEC 9646-2 (1 991 1: “Information technology - Open Systems Interconnection -
24、 Conformance testing methodology and framework - Part 2: Abstract test suite specification“. ISO/IEC 9646-4 (1 991 1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 4: Test realization“. ISO/IEC 9646-5 (1 991 1: “Information processing s
25、ystems - Open Systems Interconnection - Conformance testing methodology and framework - Part 5: Requirements on test laboratories and clients for the conformance assessment process“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of this LETS, the following definitions apply: clien
26、t: Refer to ISO/IEC 9646-1 141. Implementation Under Test (IUT): Refer to ISO/IEC 9646-1 41. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646-1 i41. - PICS proforma: Refer to ISO/IEC 9646-1 I41. * Page 8 Final draft prl-ETS 300 309: February 1995 Protocol Implementation ex
27、tra Information for Testing (PIXITI: Refer to ISO/IEC 9646- 1 141. PIXIT proforma: Refer to ISO/IEC 9646-1 41. System Under Test (SUT): Refer to ISO/IEC 9646-1 41 test laboratory: Refer to ISO/IEC 9646-1 41. user: The DSSI protocol entity at the user side of the user-network interface 3.2 Abbreviati
28、ons For the purposes of this LETS, the following abbreviations apply: ATS IUT MOT os1 PICS PIXIT SUT TE1 Abstract Test Suite Implementation Under Test Means Of Testing Open Systems Interconnection Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testing Sys
29、tem Under Test Terminal Endpoint Identifier 4 Conformance A test realizer, producing an executable test suite for the basic access Abstract Test Suite (ATS) specification contained in LETS 300 313 3, is required, as specified in ISO/IEC 9646-4 61, to produce an augmented partial PIXIT proforma confo
30、rmant with this partial PIXIT proforma specification. An augmented partial PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex A. The augmented partial PIXIT proforma may contain additional questions
31、that need to be answered in order to prepare the Means Of Testing (MOT) for a particular Implementation Under Test (IUT). A test laboratory, offering testing for the basic access ATS specification contained in LETS 300 313 131, is required, as specified in ISO/IEC 9646-5 7, to augment the augmented
32、partial PIXIT proforma to produce a PIXIT proforma conformant with this partial PIXIT proforma specification. A PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contents which are technically equivalent to annex A. The PIXIT proforma may contain ad
33、ditional questions that need to be answered in order to prepare the test laboratory for a particular IUT. ETSI PRI-ETS*300 309 95 = 3400855 0032025 943 Page 9 Final draft prl-ETS 300 309: February 1995 Annex A (normative): Partial PIXIT proforma _ _ Notwithstanding the provisions of the copyright cl
34、ause related to the text of this I-ETS, ETSI grants that users of this LETS may freely reproduce the partial PIXIT proforma in this clause so that it can be used for its intended purposes and may further publish the completed PIXIT. A. 1 Identification summary PIXIT number: Test laboratory name: Dat
35、e of issue: Issued to: A.2 Abstract test suite summary Protocol specification: Abstract test method: ETS 300 125 l I remote test method (see ISOAEC 9646-2 i511 ATS specification: I-ETC 300 313 31 A.3 Test laboratory Test laboratory identification: . Accreditaion status of the test service: Accredita
36、tion reference: Test laboratory manager: Test laboratory contact: Means of testing: Test laboratory instructions for completion: F - ETSI PRI-ETS8300 309 95 W 3400855 00112026 88 m Page 10 Final draft prl-ETS 300 309: February 1995 A.4 Client (of the test laboratory) Client identification: . Client
37、test manager: . Client contact: . Test facilities required: A.5 System Under Test (SUT) Name: Version: SCS reference: Machine configuration: Operating system identification: IUT identification: PICS (all layers): . Limitations of the SUT: Environmental conditions: F ETSI PRI-ETS*300 307 75 3400855 O
38、032027 734 Page 11 Final draft prl-ETS 300 309: February 1995 Supported (YIN) A.6 Protocol information ValuelAction PICS items referenced in the tables in the remaining parts of this proforma are those contained in I-ETS 300 305 21. Provide, if possible, the maximum time . from receiving a stimulus
39、which may result in the sending of an Identity Request to sending of the request from receipt of a frame (resulting in DL-DATA- INDICATION with information which requires response at layer 3) to when the IUT responds with a frame (as a result of DL-DATA- REQUEST with the layer 3 response) A.6.1 Prot
40、ocol identification Supported Value (YIN) implemented (SI Specification reference: ETS 300 125 ll Protocol version: basic access, user PICS reference: NOTE: The PICS reference should reference a completed PICS which is conformant with the PICS proforma contained in LETS 300 305 Pl. A.6.2 Parameter v
41、alues Table A. 1 : Parameter values Item 1.1 1.2 Provide, if possible, . the TE1 value(s) to be used in the case of non-automatic assignment and the action(s) necessary to perform the assignment coding of an information field containing a compatible SETUP message without Channel identification infor
42、mation element (for insertion in UI frame) PICS reference PC 1.1 A.6.3 Timer values Table A.2: Timer values I Itern I Timer Identity I 2*1 I Request timer Layer 3 ETSI PRI-ETS*300 309 95 W 3400855 0012028 b50 Page 12 Final draft prl-ETS 300 309: February 1995 A.6.4 Sending of frames by IUT Table A.3
43、: Sending of frames by IUT 3.1 I Item I Does the layer 3 entity of the IUT issue a DL-RELEASE-REQUEST primitive after the call reference is released (.e. send a DISC frame on ending a Layer 3 session)? Question Item Is the IUT stable in . 4.1 4.2 TE1 unassigned state (State 1 )? (see note) TE1 assia
44、ned state (State 4) for at least 6 seconds? Supported (YIN) A.6.5 Call states stability Table A.4: Ability to remain in call states NOTE: Where TE1 is not automatically assigned, stability in state 1 relates to the ability to remove the assigned TEI. Where the TE1 is automatically assigned, stabilit
45、y in state 1 relates to the ability to remain in state 1 after being unable to obtain a TEI. - ETSI PRI-ETSs300 309 95 3400855 0032029 597 m Page 13 Final draft prl-ETS 300 309: February 1995 February 1993 February 1995 History Public Enquiry PE 39: 1993-03-01 to 1993-08-06 Vote v 74: 1995-02-20 to 1995-04-1 4 F r
