1、 ETSI TR 1Digital cellular telecoRadio ne(3GPP TR 43.0TECHNICAL REPORT 143 030 V13.0.0 (2016communications system (Phanetwork planning aspects .030 version 13.0.0 Release 13GLOBAL SYSTEMOBILE COMMUN16-01) hase 2+); 13) TEM FOR ICATIONSRETSI ETSI TR 143 030 V13.0.0 (2016-01)13GPP TR 43.030 version 13
2、.0.0 Release 13Reference RTR/TSGG-0143030vd00 Keywords GSM ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Impor
3、tant notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written
4、authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document sh
5、ould be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following s
6、ervices: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version
7、 shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registere
8、d for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 143 030 V13.0.0 (2016-01)23GPP TR 43.030 version
9、13.0.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Inte
10、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, incl
11、uding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been
12、 produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross referen
13、ce between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in cla
14、use 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TR 143 030 V13.0.0 (2016-01)33GPP TR 43.030 version 13.0.0 Release 13Contents Intellectual Property Rights 2g3
15、Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g31.1 References 6g31.2 Abbreviations . 6g32 Traffic distributions 6g32.1 Uniform 6g32.2 Non-uniform . 6g33 Cell coverage 7g33.1 Location probability . 7g33.2 Ec/No threshold 7g33.3 RF-budgets . 7g33.4 Cell ranges 8g33.4.1 Large cells .
16、 8g33.4.2 Small cells . 9g33.4.3 Microcells . 10g34 Channel re-use 10g34.1 C/Ic threshold . 10g34.2 Trade-off between Ec/No and C/Ic . 10g34.3 Adjacent channel suppressions . 11g34.4 Antenna patterns . 11g34.5 Antenna heights 11g34.6 Path loss balance 11g34.7 Cell dimensioning. 11g34.8 Channel alloc
17、ation 12g34.9 Frequency hopping . 12g34.10 Cells with extra long propagation delay . 12g35 Propagation models 13g35.1 Terrain obstacles 13g35.2 Environment factors . 13g35.3 Field strength measurements 13g35.4 Cell adjustments . 13g36 Glossary 13g37 Bibliography . 14g3Annex A.1: (GSM 900 class 4) Ex
18、ample of RF-budget for GSM 900 MS handheld RF-output peak power 2 W . 15g3Annex A.2: (class 2) Example of RF-budget for GSM MS RF-output peak power 8 W 17g3Annex A.3: (DCS1800 classes 1 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second d
19、igit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 143 030 V13.0.0 (2016-01)63GPP TR 43.030 version 13.0.0 Release 131 Scope The pr
20、esent document is a descriptive recommendation to be helpful in cell planning. 1.1 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition nu
21、mber, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. 1 GSM 01.04: “Digital cellular telecommunications system (Phase 2+); Abbreviations and acronyms“. 2 3GPP TS 45.002: “Digital cellular te
22、lecommunications system (Phase 2+); Multiplexing and multiple access on the radio path“. 3 3GPP TS 45.005: “Digital cellular telecommunications system (Phase 2+); Radio transmission and reception“. 4 3GPP TS 45.008: “Digital cellular telecommunications system (Phase 2+); Radio subsystem link control
23、“. 5 CCIR Recommendation 370-5: “VHF and UHF propagation curves for the frequency range from 30 MHz to 1000 MHz“. 6 CCIR Report 567-3: “Methods and statistics for estimating field strength values in the land mobile services using the frequency range 30 MHz to 1 GHz“. 7 CCIR Report 842: “Spectrum-con
24、serving terrestrial frequency assignments for given frequency-distance seperations“. 8 CCIR Report 740: “General aspects of cellular systems“. 1.2 Abbreviations Abbreviations used in the present document are given clause 6 (Glossary) and in GSM 01.04 1. 2 Traffic distributions 2.1 Uniform A uniform
25、traffic distribution can be considered to start with in large cells as an average over the cell area, especially in the country side. 2.2 Non-uniform A non-uniform traffic distribution is the usual case, especially for urban areas. The traffic peak is usually in the city centre with local peaks in t
26、he suburban centres and motorway junctions. ETSI ETSI TR 143 030 V13.0.0 (2016-01)73GPP TR 43.030 version 13.0.0 Release 13A bell-shaped area traffic distribution is a good traffic density macro model for cities like London and Stockholm. The exponential decay constant is on average 15 km and 7,5 km
27、 respectively. However, the exponent varies in different directions depending on how the city is built up. Increasing handheld traffic will sharpen the peak. Line coverage along communication routes as motorways and streets is a good micro model for car mobile traffic. For a maturing system an effic
28、ient way to increase capacity and quality is to build cells especially for covering these line concentrations with the old area covering cells working as umbrella cells. Point coverage of shopping centres and traffic terminals is a good micro model for personal handheld traffic. For a maturing syste
29、m an efficient way to increase capacity and quality is to build cells on these points as a complement to the old umbrella cells and the new line covering cells for car mobile traffic. 3 Cell coverage 3.1 Location probability Location probability is a quality criterion for cell coverage. Due to shado
30、wing and fading a cell edge is defined by adding margins so that the minimum service quality is fulfilled with a certain probability. For car mobile traffic a usual measure is 90 % area coverage per cell, taking into account the minimum signal-to-noise ratio Ec/No under multipath fading conditions.
31、For lognormal shadowing an area coverage can be translated into a location probability on cell edge (Jakes, 1974). For the normal case of urban propagation with a standard deviation of 7 dB and a distance exponential of 3.5, 90 % area coverage corresponds to about 75 % location probability at the ce
32、ll edge. Furthermore, the lognormal shadow margin in this case will be 5 dB, as described in CEPT Recommendation T/R 25-03 and CCIR Report 740. 3.2 Ec/No threshold The mobile radio channel is characterized by wideband multipath propagation effects such as delay spread and Doppler shift as defined in
33、 3GPP TS 45.005 annex C. The reference signal-to-noise ratio in the modulating bit rate bandwidth (271 kHz) is Ec/No = 8 dB including 2 dB implementation margin for the GSM system at the minimum service quality without interference. The Ec/No quality threshold is different for various logical channe
34、ls and propagation conditions as described in 3GPP TS 45.005. 3.3 RF-budgets The RF-link between a Base Transceiver Station (BTS) and a Mobile Station (MS) including handheld is best described by an RF-budget. Annex A consists of 7 such budgets; A.1 for GSM 900 MS class 4; A.2 for GSM 900 MS class 2
35、, A.3 for DCS 1800 MS classes 1 and 2, A.4 for GSM 900 class 4 in small cells, A.5 for GSM 400 class 4 in small cells, A.6 for GSM 700 class 4 and A.7 for DCS 1800 MS class 1. GSM 900 RF-budgets should be used for 850 band. The Mean Effective Gain (MEG) of handheld MS in scattered field representing
36、 the cell range taking into consideration absorption, detuning and mismatch of the handheld antenna by the human body (MEG = -antenna/body loss) of -13 dBi for GSM 400, -10dBi for GSM 700, -9 dBi for GSM 900 and -6 dBi for DCS 1800 is incorporated in annex A.1, A.3, A.4 and A.5 as shown from measure
37、ments in Tdoc SMG2 1075/99. At 900 MHz, the indoor loss is the field strength decrease when moving into a house on the bottom floor on 1.5 m height from the street. The indoor loss near windows ( 20 m Path loss in dB (DCS 1800) = 107,7 + 26log(d/km) d 20 m The propagation loss in microcells increase
38、s sharply as the receiver moves out of line of sight, for example, around a street corner. This can be taken into account by adding 20 dB to the propagation loss per corner, up to two or three corners (the propagation being more of a guided type in this case). Beyond, the complete COST231-Walfish-Ik
39、egami model as presented in annex B should be used. Microcells have a radius in the region of 200 to 300 metres and therefore exhibit different usage patterns from large and small cells. They can be supported by generally smaller and cheaper BTS“s. Since there will be many different microcell enviro
40、nments, a number of microcell BTS classes are defined in 3GPP TS 45.005. This allows the most appropriate microcell BTS to be chosen based upon the Minimum Coupling Loss expected between MS and the microcell BTS. The MCL dictates the close proximity working in a microcell environment and depends on
41、the relative BTS/MS antenna heights, gains and the positioning of the BTS antenna. In order to aid cell planning, the micro-BTS class for a particular installation should be chosen by matching the measured or predicted MCL at the chosen site with the following table. The microcell specifications hav
42、e been based on a frequency spacing of 6 MHz between the microcell channels and the channels used by any other cell in the vicinity. However, for smaller frequency spacings (down to 1.8 MHz) a larger MCL must be maintained in order to guarantee successful close proximity operation. This is due to an
43、 increase in wideband noise and a decrease in the MS blocking requirement from mobiles closer to the carrier. Micro-BTS class Recommended MCL (GSM 900) Recommended MCL (DCS 1800) Normal Small freq. spacing Normal Small freq. spacing M1 60 64 60 68M2 55 59 55 63 M3 50 54 50 58Operators should note th
44、at when using the smaller frequency spacing and hence larger MCL the blocking and wideband noise performance of the micro-BTS will be better than necessary. Operators should exercise caution in choosing the microcell BTS class and transmit power. If they depart from the recommended parameters in 45.
45、005 they risk compromising the performance of the networks operating in the same frequency band and same geographical area. 4 Channel re-use 4.1 C/Ic threshold The C/Ic threshold is the minimum co-channel carrier-to-interference ratio in the active part of the timeslot at the minimum service quality
46、 when interference limited. The reference threshold C/Ic = 9 dB includes 2 dB implementation margin on the simulated residual BER threshold The threshold quality varies with logical channels and propagation conditions, see 3GPP TS 45.005. 4.2 Trade-off between Ec/No and C/Ic For planning large cells
47、 the service range can be noise limited as defined by Ec/No plus a degradation margin of 3 dB protected by 3 dB increase of C/Ic, see annex A. ETSI ETSI TR 143 030 V13.0.0 (2016-01)113GPP TR 43.030 version 13.0.0 Release 13For planning small cells it can be more feasible to increase Ec/No by 6 dB co
48、rresponding to an increase of C/Ic by 1 dB to cover shadowed areas better. C/(I+N) = 9 dB represents the GSM limit performance. To permit handheld coverage with 10 dB indoor loss, the Ec/No has to be increased by 10 dB outdoors corresponding to a negligible increase of C/Ic outdoors permitting about
49、 the same interference limited coverage for MS including handhelds. The range outdoors can also be noise limited like the range indoors as shown in section 3.4 and annex A.1. 4.3 Adjacent channel suppressions Adjacent channel suppression (ACS) is the gain (Ia/Ic) in C/I when wanted and unwanted GSM RF-signals co-exist on adjacent RF channels whilst maintaining the same quality as in the co-channel case, i.e. ACS = C/Ic - C/Ia. Taking into account frequency errors and fading conditions in the product of spectrum and filter of wanted and unwanted GSM
